[App_rpt-users] NanoPi
Bob
Bob at Fot.com.au
Wed Aug 1 08:16:06 UTC 2018
Hi Steve
Thks for the response !
Where can I download the solution ?
Thks for all your work
73
Bob
VK6ZGN
On 26 July 2018 21:56:18 Steve Zingman <szingman at msgstor.com> wrote:
> JJ is correct. When the kernel was updated the new kernel no longer
> supports OSS. While waiting for JJ to publish his work around or for the
> dev team to produce a nono OSS channel driver, I'll post the info to put
> the kernel and headers on hold to keep OSS support.
> I'll have the info up by tomorrow morning.
>
> Steve N4IRS
>
>
> On 7/26/2018 9:08 AM, JJC wrote:
>> This is because OSS is not supported and marked as broken in current Linux
>> distributions. You can either use a kernel that has it compiled in or you
>> can do what I did and use:
>>
>> ALSA
>> PulseAudio
>> osspd (emulates oss through pulse)
>>
>> I’ll write up some basic instructions for how mine is working... but the
>> net of it it is that without /dev/dsp1 your asl can’t send or receive audio
>> via your sound card (URI)
>>
>> Maybe I’m talking out of turn, I did not read the entire thread back.
>>
>>
>> Sent from the iRoad
>>
>> On Jul 26, 2018, at 07:52, Bob Good <Bob at Fot.com.au> wrote:
>>
>>> Hi Steve
>>>
>>>
>>>
>>> Thanks that worked…… However now all seems to load and registers OK but
>>> SimpleUSB wont loa/run ?
>>>
>>>
>>>
>>> return email: Bob at Fot.com.au
>>>
>>>
>>>
>>> NODE=47324
>>>
>>> REGPASS=47324:xxxxxx at register.allstarlink.org ; This must be
>>> changed to your node number, password
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Call sign: VK6ZGN
>>>
>>> Interface type: SimpleUSB/usb_47324 ; SimpleUSB
>>>
>>> Echolink Callsign: INVALID
>>>
>>> Echolink node: 000000 ASL node used:
>>>
>>>
>>>
>>> Ping test to 8.8.8.8
>>>
>>> PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
>>>
>>> 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=77.5 ms
>>>
>>> 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=70.6 ms
>>>
>>> 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=84.1 ms
>>>
>>> 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=84.4 ms
>>>
>>>
>>>
>>> --- 8.8.8.8 ping statistics ---
>>>
>>> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
>>>
>>> rtt min/avg/max/mdev = 70.664/79.212/84.453/5.656 ms
>>>
>>>
>>>
>>> Ping test to register.allstarlink.org
>>>
>>> PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
>>>
>>> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50
>>> time=209 ms
>>>
>>> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50
>>> time=208 ms
>>>
>>> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50
>>> time=208 ms
>>>
>>> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50
>>> time=208 ms
>>>
>>>
>>>
>>> --- register.allstarlink.org ping statistics ---
>>>
>>> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
>>>
>>> rtt min/avg/max/mdev = 208.471/208.709/209.006/0.220 ms
>>>
>>>
>>>
>>> Ouput of ifconfig
>>>
>>> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>>>
>>> inet 192.168.168.39 netmask 255.255.255.0 broadcast 192.168.168.255
>>>
>>> inet6 fe80::4f:49ff:fe38:5803 prefixlen 64 scopeid 0x20<link>
>>>
>>> ether 02:4f:49:38:58:03 txqueuelen 1000 (Ethernet)
>>>
>>> RX packets 1641 bytes 149786 (146.2 KiB)
>>>
>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>
>>> TX packets 1781 bytes 554581 (541.5 KiB)
>>>
>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>
>>> device interrupt 33
>>>
>>>
>>>
>>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
>>>
>>> inet 127.0.0.1 netmask 255.0.0.0
>>>
>>> inet6 ::1 prefixlen 128 scopeid 0x10<host>
>>>
>>> loop txqueuelen 1000 (Local Loopback)
>>>
>>> RX packets 16 bytes 1312 (1.2 KiB)
>>>
>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>
>>> TX packets 16 bytes 1312 (1.2 KiB)
>>>
>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>
>>>
>>>
>>>
>>>
>>> Output of lsmod grep dahdi
>>>
>>> dahdi 200704 28
>>>
>>>
>>>
>>> IAX2 registry
>>>
>>> Host dnsmgr Username Perceived Refresh State
>>>
>>> 67.215.233.178:4569 Y 47324 58.178.114.94:64301 60
>>> Registered
>>>
>>>
>>>
>>> Asterisk version:
>>>
>>> Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l running
>>> Linux on 2018-03-07 14:53:41 UTC
>>>
>>>
>>>
>>> Current date and time: 2018-07-26.04:32
>>>
>>>
>>>
>>> updatenodelist service running?
>>>
>>> root 682 0.0 0.4 4428 2384 ? Ss 04:29 0:00 /bin/bash
>>> /usr/local/bin/rc.updatenodelist &
>>>
>>> root 1650 0.0 0.1 3764 560 pts/2 S+ 04:35 0:00 grep
>>> updatenodelist
>>>
>>>
>>>
>>> /tmp/rpt_extnodes-temp file
>>>
>>> -rw-r--r-- 1 root root 0 Jul 26 04:30 /tmp/rpt_extnodes-temp
>>>
>>>
>>>
>>> /var/lib/asterisk/rpt_extnodes file
>>>
>>> -rwx------ 1 root root 140551 Jul 26 04:26 /var/lib/asterisk/rpt_extnodes
>>>
>>>
>>>
>>> ####### Begin warnings from messages file
>>>
>>> [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Loaded parameters from
>>> simpleusb_tune_usb_47324.conf for device usb_47324 .
>>>
>>> [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Unable to re-open DSP
>>> device 1 (usb_47324): No such file or directory
>>>
>>> [Jul 26 04:26:42] WARNING[986] chan_simpleusb.c: Unable to re-open DSP
>>> device 1 (usb_47324): No such file or directory
>>>
>>> And so on forever !!
>>>
>>>
>>>
>>> ####### Begin warnings from messages.1 file
>>>
>>>
>>>
>>> 73
>>>
>>> Bob
>>>
>>> VK6ZGN
>>>
>>>
>>>
>>> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
>>> Behalf Of Steve Zingman
>>> Sent: Wednesday, 25 July 2018 17:58
>>> To: Users of Asterisk app_rpt
>>> Subject: Re: [App_rpt-users] NanoPi
>>>
>>>
>>>
>>> Bob,
>>> It looks like DKMS did not rebuild DAHDI properly.
>>>
>>> Please do as root:
>>> dpkg-reconfigure asl-dahdi-linux-dkms
>>> reboot
>>>
>>> Should now be fixed. Check DAHDI is running by:
>>> lsmod | grep dahdi
>>>
>>> 73, Steve N4IRS
>>>
>>> On 07/25/2018 04:38 AM, Bob Good wrote:
>>>
>>>
>>>
>>> Hi Guys
>>>
>>>
>>>
>>> I have tried loading ASL_1.01-20180228-armhf-nanopi image onto a NanoPi
>>>
>>>
>>>
>>> Seems to load fine I run the updates etc then the Menu
>>> all seems OK but AllStar does not seem to run ?
>>>
>>>
>>>
>>> return email: bob at Fot.com.au
>>>
>>>
>>>
>>> NODE=47324
>>>
>>> REGPASS=47324:xxxxx at register.allstarlink.org ; This must be
>>> changed to your node number, password
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Anyone got any ideas ??
>>>
>>>
>>>
>>> 73
>>>
>>> VK6ZGN
>>> Bob Bob at Fot.com.au
>>> Western Australia Mob. 61 (0) 418 902 194
>>>
>>> The contents of this e-mail (including any attachments) may be
>>> confidential and privileged. Any unauthorised use of this document
>>> or it's contents is prohibited. If you have received this e-mail in
>>> error, please notify us immediately and erase this document
>>> E&OE
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180801/56d3d657/attachment.html>
More information about the App_rpt-users
mailing list