[App_rpt-users] App_rpt-users Digest, Vol 114, Issue 2

Fri Aug 3 01:23:25 UTC 2018

David,

Your tip did the trick!  Why would an update change the rpt.conf duplex setting to 1 from 2?  All other settings stayed the same.

Thank you!

Greg, W2GCM

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of app_rpt-users-request at lists.allstarlink.org
Sent: Thursday, August 02, 2018 12:00 PM
To: app_rpt-users at lists.allstarlink.org
Subject: App_rpt-users Digest, Vol 114, Issue 2

Send App_rpt-users mailing list submissions to
	app_rpt-users at lists.allstarlink.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at lists.allstarlink.org

You can reach the person managing the list at
	app_rpt-users-owner at lists.allstarlink.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

This site is dedicated to the memory of Jim Dixon WB6NIL

Today's Topics:

   1. After last update to audio is not working (Greg Mohr)
   2. Re: After last update to audio is not working (Mike)
   3. Re: After last update to audio is not working (JJC)
   4. Re: After last update to audio is not working (David McGough)
   5. ASL without OSS (JJC)

----------------------------------------------------------------------

Message: 1
Date: Wed, 1 Aug 2018 16:57:08 +0000
From: Greg Mohr <Greg at gmohr.com>
To: "app_rpt-users at lists.allstarlink.org"
	<app_rpt-users at lists.allstarlink.org>
Subject: [App_rpt-users] After last update to audio is not working
Message-ID:
	<EC6B484460B0724596A8E89BFF6B542B72B181E5 at SRV-MOHR.mohrnet.local>
Content-Type: text/plain; charset="us-ascii"

I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared.  I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes.  It just doesn't transmit the audio through when someone trys to call out to another person.

I checked the cables and radios and all are up and running and connected fine.  I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs.  When I plug in the old ham-o-matic, audio comes through.  Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file?

Thank you,
Greg
W2GCM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180801/d149b694/attachment-0001.html>

------------------------------

Message: 2
Date: Wed, 1 Aug 2018 13:08:30 -0400
From: Mike <mm at midnighteng.com>
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] After last update to audio is not working
Message-ID: <ecefa86b-1478-0f0d-06de-b32042da4685 at midnighteng.com>
Content-Type: text/plain; charset=windows-1252; format=flowed

You did not state method of audio at app_rpt but double check your usb 'id of the audio device' and then look for corruptions in usbradio/simpleusb in the form of hidden characters.
(use notepad+++ or similar 'show all characters') Also, did you re-write any of those config files and do you have the switching logic of cor correct.

It's a place to start.

...mike/kb8jnm

On 8/1/2018 12:57 PM, Greg Mohr wrote:
> I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared.  I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes.  It just doesn't transmit the audio through when someone trys to call out to another person.
> 
> I checked the cables and radios and all are up and running and connected fine.  I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs.  When I plug in the old ham-o-matic, audio comes through.  Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file?
> 
> Thank you,
> Greg
> W2GCM
> 
> 
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 

------------------------------

Message: 3
Date: Wed, 1 Aug 2018 11:27:53 -0600
From: JJC <cummingsj at gmail.com>
To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
Subject: Re: [App_rpt-users] After last update to audio is not working
Message-ID: <613D5969-B5AB-4942-AAA8-9217947940D2 at gmail.com>
Content-Type: text/plain;	charset=us-ascii

Log review for errors is also a good place to start

Sent from the iRoad

> On Aug 1, 2018, at 11:08, Mike <mm at midnighteng.com> wrote:
> 
> You did not state method of audio at app_rpt but double check your usb 'id of the audio device' and then look for corruptions in usbradio/simpleusb in the form of hidden characters.
> (use notepad+++ or similar 'show all characters') Also, did you 
> re-write any of those config files and do you have the switching logic of cor correct.
> 
> It's a place to start.
> 
> ...mike/kb8jnm
> 
>> On 8/1/2018 12:57 PM, Greg Mohr wrote:
>> I just updated to the most recent version of the Allstar image and my audio on my repeater disappeared.  I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes.  It just doesn't transmit the audio through when someone trys to call out to another person.
>> I checked the cables and radios and all are up and running and connected fine.  I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs.  When I plug in the old ham-o-matic, audio comes through.  Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file?
>> Thank you,
>> Greg
>> W2GCM
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

------------------------------

Message: 4
Date: Wed, 1 Aug 2018 13:29:02 -0400 (EDT)
From: David McGough <kb4fxc at inttek.net>
To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
Subject: Re: [App_rpt-users] After last update to audio is not working
Message-ID:
	<Pine.LNX.4.44.1808011326520.4785-100000 at goliath.inttek.net>
Content-Type: TEXT/PLAIN; charset=US-ASCII

For a full repeater, make sure you have duplex=2 in your rpt.conf node stanza.

...From your description, you may be configured in duplex=1.

73, David KB4FXC

On Wed, 1 Aug 2018, Greg Mohr wrote:

> I just updated to the most recent version of the Allstar image and my
audio on my repeater disappeared.  I can key up the system and it will reply back with the courtesy tone and the required ID every 15 minutes.  
It just doesn't transmit the audio through when someone trys to call out to another person.
> 
> I checked the cables and radios and all are up and running and
connected fine.  I have disconnectged the cables and plugged them back in to test and the same lack of audio occurs.  When I plug in the old ham-o-matic, audio comes through.  Where should I be looking to check audio settings for the Motorola gm300 radios in the rpt.conf file?
> 
> Thank you,
> Greg
> W2GCM
> 
> 
> 

------------------------------

Message: 5
Date: Wed, 1 Aug 2018 16:19:24 -0600
From: JJC <cummingsj at gmail.com>
To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>,
	app_rpt-users at ohnosec.org
Subject: [App_rpt-users] ASL without OSS
Message-ID:
	<CAOb75Osbz7gb0DY-KONiPkvhvvZ06HBeX_1fcOcVvQ+1iR6qDQ at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

So it's a quick and dirty post but it's all that I had time to do....
Please be sure to read the whole thing including the "CAVEATS" section if you try this at home lol...

http://enhanced.github.io/2018/08/ASL_With_ALSA

Using the info that I posted at the above URL I have a current kernel running and very clean audio, please note the TO-DO section also.. because the "clean" part is anecdotal.

Please let me know if something isn't working for you (or if it is) and we can adjust fire to compensate as needed..

N0PKT
Jay
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180801/09195fb9/attachment-0001.html>

------------------------------

Subject: Digest Footer

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

------------------------------

End of App_rpt-users Digest, Vol 114, Issue 2
*********************************************