[App_rpt-users] tone decode, encode

[Steve Mahler]

Greg:

Don't know about a page, but this works for me.  Must be usbradio.con 
(vice simpleusb I think).

;
; CTCSS / PL TONES
;
txctcssdefault= 103.5   ; default tx ctcss freq, any frequency permitted

rxctcssfreqs= 67.0,88.5,136.5,192.8,250.3
                         ; rx ctcss freqs in floating point. must be in 
table
                         ; the Nth position in rxctcssfreqs sends Nth 
position of txctcssfreqs

txctcssfreqs= 67.0,88.5,103.5,192.8,250.3
                         ; tx ctcss freqs, any frequency permitted

Each listed PL gives the same PL out (like a community repeater) EXCEPT 
136.5 RX gives 103.5 TX.  [This exception is all about a 
multi-receiver/crossband system, see http://KF5VH.com for more details 
about the repeater.]  The default PL is used when the RX is inactive and 
an announcement or net audio uses the TX.

...STeve - KF5VH


On 8/15/2018 7:42 AM, Greg wrote:
> Is there a page with information of how to use allstar to decode and 
> encode ctcss? I was hoping to do 2 different tones.
> Thanks
> Greg
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus