[App_rpt-users] SSH Access

[Mike]

Well, sorry,  that's my poor memory getting the best of me again... 
confusing it with something else !

PermitRootLogin yes

That should do it, but it may be commented out and say something other 
than yes/no by default.

...mike/kb8jnm

On 8/16/2018 9:24 PM, TGundo 2003 wrote:
>   Hi Mike-
> I went in, changed my port. However, I don't see Enable web access anywhere. Could it be called something else?
> ThanksTom
>      On Thursday, August 16, 2018, 4:19:30 PM CDT, Mike <mm at midnighteng.com> wrote:
>   
>   Ssh
> Edit etc/ssh/sshd_config
> Enable web access = yes
> 
> Save
> Restart ssh
> 
> You should change the port number while u r at it
> 
> Sorry t b brief
> Mobile
> 
> Mike / Sent While Mobile
> 
>> On Aug 16, 2018, at 5:09 PM, TGundo 2003 <tgundo2003 at yahoo.com> wrote:
>>
>> Hi all-
>>
>> I'm in the last lap of getting my first node online, still have a lot of learning to do. My setup consists of an S-Com 7330 that has repeaters on the first two ports and the Asterisk Pi on the third port for linking to a neighboring system.
>>
>> A few items I need some direction on:
>>
>> 1. SSH access. I can putty into the Pi and get to the login and password screen, but it rejects my username and password that I use to log into the machine on the local interface. Do I need to setup a different user account for SSH access? anyone with a good web link on how to accomplish this?
>>
>> 2.  CTCSS Invert. I am using USBRADIO for the driver. On the interface from the Repeater Builder USB-RIM Lite 7330 module it is lighting up my CTCSS light with no activity like its inverted. I can jumper the 7330 internally to invert it and make it go out, but not thru the driver. I changed CTCSS to USBINVERT but it didn't solve it. COS is working properly. What else should I be checking? Maybe a cabling issue? I used an off the shelf DB9 cable to connect the RIM to the 7330.
>>
>> 3. Are there any ports I need to open up on my router? I've looked far and wide and cannot seem to find this info. When the machine is fired up I see it is listed online on the website.
>>
>>
>> Thank you all for the help!
>> Tom
>> W9SRV
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>    
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>