[App_rpt-users] SSH Access

[Mike]

Have you set ROOT password ?
Edit the file as root from console
Restart the ssh service

...mike/kb8jnm

On 8/16/2018 11:24 PM, TGundo 2003 wrote:
>   Ok, I found that and edited. Wrote it out, rebooted, and it doesn't seem to take affect, I went back in and my changes are there, both that and the new port, but its still listening on port 22. Is there somewhere I have to change which SSH config to load?
> Thanks again
> Tom
>      On Thursday, August 16, 2018, 8:39:04 PM CDT, Mike <mm at midnighteng.com> wrote:
>   
>   Well, sorry,  that's my poor memory getting the best of me again...
> confusing it with something else !
> 
> PermitRootLogin yes
> 
> That should do it, but it may be commented out and say something other
> than yes/no by default.
> 
> ...mike/kb8jnm
> 
> On 8/16/2018 9:24 PM, TGundo 2003 wrote:
>>    Hi Mike-
>> I went in, changed my port. However, I don't see Enable web access anywhere. Could it be called something else?
>> ThanksTom
>>        On Thursday, August 16, 2018, 4:19:30 PM CDT, Mike <mm at midnighteng.com> wrote:
>>    
>>    Ssh
>> Edit etc/ssh/sshd_config
>> Enable web access = yes
>>
>> Save
>> Restart ssh
>>
>> You should change the port number while u r at it
>>
>> Sorry t b brief
>> Mobile
>>
>> Mike / Sent While Mobile
>>
>>> On Aug 16, 2018, at 5:09 PM, TGundo 2003 <tgundo2003 at yahoo.com> wrote:
>>>
>>> Hi all-
>>>
>>> I'm in the last lap of getting my first node online, still have a lot of learning to do. My setup consists of an S-Com 7330 that has repeaters on the first two ports and the Asterisk Pi on the third port for linking to a neighboring system.
>>>
>>> A few items I need some direction on:
>>>
>>> 1. SSH access. I can putty into the Pi and get to the login and password screen, but it rejects my username and password that I use to log into the machine on the local interface. Do I need to setup a different user account for SSH access? anyone with a good web link on how to accomplish this?
>>>
>>> 2.  CTCSS Invert. I am using USBRADIO for the driver. On the interface from the Repeater Builder USB-RIM Lite 7330 module it is lighting up my CTCSS light with no activity like its inverted. I can jumper the 7330 internally to invert it and make it go out, but not thru the driver. I changed CTCSS to USBINVERT but it didn't solve it. COS is working properly. What else should I be checking? Maybe a cabling issue? I used an off the shelf DB9 cable to connect the RIM to the 7330.
>>>
>>> 3. Are there any ports I need to open up on my router? I've looked far and wide and cannot seem to find this info. When the machine is fired up I see it is listed online on the website.
>>>
>>>
>>> Thank you all for the help!
>>> Tom
>>> W9SRV
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>      
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>    
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>