[App_rpt-users] K0HYT Remote base

[Bob Pyke]

You are using hamvoip, and this list is for AllstarLink. There are some folks who monitor both lists, but you are more apt to receive a useful response from the other list.

Thanks,
Bob
K6ECM
73


> On Dec 29, 2018, at 6:55 AM, m at palmers-family.com wrote:
> 
>   Hello everyone. After a couple years of playing with AllStar on RPI I have finally dove into my remote base setup. I am using a Pi3 with a IC706MKIIG, Prolific USB adapter (known working). When I add the radio=ic706 line and restart Asterisk I notice the heartbeat led locks solid and asterisk crashes when I connect to 1999. If I comment out that one line it works fine. I have set permissions to /dev/USB0. Any ideas? I have attached a PDF with my screenshots and node stanza.
> 
> Thanks in advance for any help.
> 
> 
> 
> Rpi 3 Arch
> 
> IC706MkIIG
> 
> Hamvoip V 1.4rc5-14
> 
> Asterisk 1.3.23.pre.hamvoip-CV1.5.3-48-app_rpt-0.327-11
> 
> 
> 
> <Rbase Config.pdf>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181229/81fba157/attachment.html>