[App_rpt-users] Screwed up

[Tim Sawyer]

Added to WiKi

http://wiki.allstarlink.org/wiki/DAHDI_Make

On Sun, Feb 4, 2018 at 5:06 PM, Steve Zingman <szingman at msgstor.com> wrote:

> You do not need to pull down fresh source. If your upgrade updated the
> kernel headers, you can try:
> AS root
> cd /usr/src/
> ls
> you should see dahdi-complete
> cd dahdi-complete
> make
> errors?
> make install
> reboot.
>
> Steve N4IRS
>
>
> On 02/04/2018 08:02 PM, John Rudolph- N2YP wrote:
>
> In order to do this can the code come from digium or do I have to pull it
> from the all-star GitHub? Is there a way to pull a complete module install
> with out the full install image which will erase the entire drive?
>
> Ultimately I hope to run mmdvm on the same computer so future upgrades and
> replacing damaged modules this way would be handy. I've been around Linux
> some but I'm still learning and have a way to go. Also this is a full
> fledged computer and not a pi install.
>
> John N2YP
>
> Message: 6
> Date: Sun, 4 Feb 2018 05:05:44 -0800
> From: Tim Sawyer <tisawyer at gmail.com> <tisawyer at gmail.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] Screwed up
> Message-ID:
> <CAG3ht9sX4C7LfAmkCRD-CVLE0ySV6b_JgeCuzFnJeF9Gc6KV+g at mail.gmail.com>
> <CAG3ht9sX4C7LfAmkCRD-CVLE0ySV6b_JgeCuzFnJeF9Gc6KV+g at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> A recompile of DAHDI may be all you need. I can't find the instructions at
> the moment. Anyone have those handy?
>
> On Sat, Feb 3, 2018 at 10:30 PM, John Rudolph- Country Squire Realty <
> John at n2yp.com> wrote:
>
> Ive had my DIAL node up and running which Ive been tweaking and
> experimenting with and have had lots of success. I installed webmin to make
> things easier for myself. I was going to be installing Allmon2 and went to
> check my Apache and php versions and realized there were some updates as
> well as 85 other package updates identified. I selected the two I wanted
> and when I went to start the update I hit update all which caused all 85 to
> update and break all-star. My config files are still accessable but
> everything else appears shot for allstar. Is there a way I can reinstall or
> repair it without doing a complete disk wipe?
>
> John N2YP
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity
>
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180204/f6f325fa/attachment.html>