[App_rpt-users] Simulcast buffer value issue

[Tim Sawyer]

Sorry to say this, but those are the bad external clock source I mentioned
in another post.They are also very dirty. I know one person who's equipment
was turned off by the site manager due to PCGM interferance.

On Thu, Feb 15, 2018 at 3:12 PM, Bryan Fields <Bryan at bryanfields.net> wrote:

> On 2/14/18 5:09 PM, Hayden Honeywood wrote:
> > In response to Jeff's issue - make sure your RTCM's 9.6MHz clock is GPS
> > locked. Both Joe KC2IRV and myself have confirmed that, although using
> OCXO's
> > by themselves work, they aren't perfect and move around. If you still
> have the
> > little crystal in there, that will be the major source of your issues,
> it is
> > nowhere near stable enough.
>
> I have a few PCGM's that I never used, if anyone needs a few please send
> me a
> direct email.
>
> Thank you,
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180215/757d89f9/attachment.html>