[App_rpt-users] Simulcast buffer value issue

[Sam Nabkey]

Seems it works a bit better..  I came from Hamvoip back to DIAL.

On Feb 22, 2018 11:52, "Joe Moskalski" <kc2irv at gmail.com> wrote:

> Hamvoip
>
> On Feb 22, 2018 11:48 AM, "Sam Nabkey" <sam.nabkey at gmail.com> wrote:
>
>> DIAL or Hamvoip?
>>
>> On Feb 22, 2018 10:52, "Joe Moskalski" <kc2irv at gmail.com> wrote:
>>
>>> I do not think server horsepower is the issue. I am running three TX/RX
>>> simulcast sites off of a Pi3 and when I look at the system resources used
>>> it isn't working very hard.
>>>
>>> On Thu, Feb 22, 2018 at 10:47 AM, Jesse Lloyd <ve7lyd at gmail.com> wrote:
>>>
>>>> I should add to my last post that I use a dual NIC server. One RTCM is
>>>> connected directly to the server to provide timing only. The other NIC ties
>>>> to the network with the other RTCM's that have radios attached.
>>>>
>>>> Cheers,
>>>> Jesse
>>>>
>>>> On Feb 22, 2018, at 6:43 AM, ARS W5OMR <ars.w5omr at gmail.com> wrote:
>>>>
>>>> That's probably a latency in the audio section of the PC being used.
>>>>
>>>> A buddy had the same issues while operating his HF station, remote.
>>>> After a few minutes, the latency grew and grew.... He used WWV (he lives in
>>>> West Central OK) as a time base...
>>>>
>>>> His solution was to get a more "robust" (read: Turtle Beach) sound
>>>> card. This was in his desktop at the house.
>>>>
>>>> It might not be a software problem, as much as a Hardware issue.
>>>>
>>>> I don't remember if you said this was on an RTCM or not but I know one
>>>> is involved.
>>>>
>>>> I believe I would check more on all audio devices involved.
>>>>
>>>>
>>>> On Feb 22, 2018 12:11 AM, "Hayden Honeywood" <haydenph91 at gmail.com>
>>>> wrote:
>>>>
>>>>> I've made a YouTube video with clips from a single conversation I had
>>>>> this morning on the repeater. The audio was recorded on my dashcam.
>>>>>
>>>>> As can be heard in the video, when I start the conversation, the audio
>>>>> delay is nil, or very little when unkeying. However, by the time I'm
>>>>> finished (I think the conversation lasted about 20 minutes) the audio delay
>>>>> is out to 4 or 5 words!
>>>>>
>>>>> We were both using the same repeater. We have a repeater linked in
>>>>> from another location. I've noticed when talking to someone via that
>>>>> method, the audio delay issue does not build up so quickly.
>>>>>
>>>>> Hopefully this explains a bit better the issue I'm having.
>>>>>
>>>>> https://youtu.be/KG3GgaHVWbI
>>>>>
>>>>> Regards
>>>>> Hayden VK7HH
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>> press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>> the list detailing the problem.
>>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180222/6a903757/attachment.html>