[App_rpt-users] Simulcast buffer value issue

Sam Nabkey sam.nabkey at gmail.com
Thu Feb 22 22:14:06 UTC 2018


voter.conf:
[Nodenumber]
buflen=211

RTCM:
7  - Tx Buffer Length (600)






On Thu, Feb 22, 2018 at 4:55 PM, Hayden Honeywood <haydenph91 at gmail.com>
wrote:

> I'm running a Pi 3 too.
>
> Using http://vklink.com.au/ as the image for local use in VK.
>
> I logged in shortly after I had a QSO on the repeater and the load average
> was 0.00, 0.01, 0.00. I also noticed while having another conversation on
> the repeater this morning, the problem started after 5-10 minutes or so, up
> to almost 7 syllables. Then the other user went clear for 5 mins, then came
> back and we continued the conversation with no delay for a further 10
> minutes.
> I've disabled the voter record function in the channel driver for now,
> just in case that is the issue.
>
> I guess I could try another RTCM/Voter unit sitting at the Master site
> with no radio attached at all purely for timing.
>
> Sam - what did you change your buflen too?
> My current config -
>
> buflen = 140 in voter.conf
> Tx Buffer Length in RTCM's = 1120
>
> Ping to site 2 (slowest site) - Packets tx: 100, rx: 100, oos: 0, Avg.:
> 33.720 ms
>  Worst: 53 ms, Best: 32 ms, 100.0% Packets successfully received (0.0%
> loss)
>
> Ping to site 1 (master site) - Packets tx: 100, rx: 100, oos: 0, Avg.:
> 3.450 ms
> Worst: 4 ms, Best: 3 ms, 100.0% Packets successfully received (0.0% loss)
>
> Regards
> Hayden VK7HH
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180222/618dc390/attachment.html>


More information about the App_rpt-users mailing list