[App_rpt-users] Remote already in this mode message

Thu Jan 4 15:35:29 UTC 2018

Error in the cron job, it was supposed to check for a connection and if there was a connection exit and do nothing but I forgot to put in exit so it continued on to the reconnect line, doh!

Thanks for the quick help guys, much appreciated.

One other quick question, I have one full duplex node with courtesy tones, can I shut off the connect and disconnect messages and still keep the courtesy tones?

Sent from my iPhone

> On Jan 4, 2018, at 11:57 AM, Bryan Taylor <overnite at me.com> wrote:
> 
> Thanks Guys,
> 
> There are two other nodes with cron jobs that check for a connection and if not reconnect, I’ll remove them and see if that is the cause
> 
> 
> 
> Sent from my iPhone
> 
>> On Jan 4, 2018, at 11:57 AM, Steve Zingman <szingman at msgstor.com> wrote:
>> 
>> Check for a cron task that tries to connect.
>> 
>> Steve
>> 
>>> On 1/4/2018 10:20 AM, Bryan Taylor wrote:
>>> I thought about doing that but I would like to find out why it started happening. Apparently it’s been doing it for a couple of       days now, but I don’t know what could have caused it to start doing it.
>>> 
>>> Bryan
>>> 
>>> Sent from my iPhone
>>> 
>>> On Jan 4, 2018, at 11:47 AM, Lu V <luvencl8 at gmail.com> wrote:
>>> 
>>>> Just delete the one recording and or replace it with a low duration low volume beep. 
>>>> 
>>>> 
>>>>> On Jan 4, 2018 10:07 AM, "Bryan Taylor" <overnite at me.com> wrote:
>>>>> 
>>>>> Hopefully a quick question,
>>>>> 
>>>>> For a few days now I have one allstar node playing the “remote already in this mode” message about every  10 minutes. Anybody have any idea as to what could be causing it or where I could look to see what is causing it? It never did it before. I did add a new node to the network a few days ago but I did add the new node to it’s nodes stanza. It only connects to a hub node directly.
>>>>> 
>>>>> There is nothing in the log files that points to anything.
>>>>> 
>>>>> Google doesn’t find anything helpful either.
>>>>> 
>>>>> Thanks
>>>>> Bryan
>>>>> Sent from my iPhone
>>>>> 
>>>>> > On Jan 2, 2018, at 1:28 AM, Benjamin Naber <Benjamin at Project23D.com> wrote:
>>>>> >
>>>>> > Suppose one can copy the necessary php and other related files from a
>>>>> > hamvoip distro, and paste to another distro?
>>>>> >
>>>>> > Provided, some kind of http/https server is already installed. Probably
>>>>> > some other things need to be completed in that task line-up.
>>>>> >
>>>>> > ~Benjamin, KB9LFZ
>>>>> >
>>>>> >
>>>>> >
>>>>> >> On Fri, 2017-12-29 at 19:30 -0500, Pierre Martel wrote:
>>>>> >> nope not the same supermon ;-)
>>>>> >>
>>>>> >>
>>>>> >> 2017-12-29 18:54 GMT-05:00 Bob Pyke <k6ecm1 at gmail.com>:
>>>>> >>> Try https://sourceforge.net/projects/supermon/
>>>>> >>>
>>>>> >>> Thanks,
>>>>> >>> Bob
>>>>> >>> K6ECM
>>>>> >>>
>>>>> >>> Sent from iPad
>>>>> >>>
>>>>> >>>
>>>>> >>>> On Dec 29, 2017, at 2:37 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
>>>>> >>>>
>>>>> >>>> Supermon code
>>>>> >>>
>>>>> >>> _______________________________________________
>>>>> >>> App_rpt-users mailing list
>>>>> >>> App_rpt-users at lists.allstarlink.org
>>>>> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> >>>
>>>>> >>> To unsubscribe from this list please visit http://lists.allstarlink
>>>>> >>> .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>>>>> >>> bottom of the page. Enter your email                   address and press the
>>>>> >>> "Unsubscribe or edit options button"
>>>>> >>> You do not need a password to unsubscribe, you can do it via email
>>>>> >>> confirmation. If you have trouble unsubscribing, please send a
>>>>> >>> message to the list detailing the problem.
>>>>> >>
>>>>> >> _______________________________________________
>>>>> >> App_rpt-users mailing list
>>>>> >> App_rpt-users at lists.allstarlink.org
>>>>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> >>
>>>>> >> To unsubscribe from this list please visit http://lists.allstarlink.o
>>>>> >> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>>>>> >> bottom of the page. Enter your email address and press the
>>>>> >> "Unsubscribe or edit options button"
>>>>> >> You do not need a password to unsubscribe, you can do it via email
>>>>> >> confirmation. If you have trouble unsubscribing, please send a
>>>>> >> message to the list detailing the problem.
>>>>> > _______________________________________________
>>>>> > App_rpt-users mailing list
>>>>> > App_rpt-users at lists.allstarlink.org
>>>>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> >
>>>>> > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180104/7c7b25d5/attachment.html>