[App_rpt-users] Pulse back adjustment parameter

[andy_kb7b]

Lu,

Based on your description, it sounds like you are trying to prevent your repeater's "Hang Time" from being transmitted over IRLP. If so, the following IRLP Owners FAQ should help.

http://irlp.net/cwid.html


If you have already done this, section-5 of the IRLP "What to do After the Install" document describes how to check for pulseback. You can get it at:

http://www.irlp.net/new-install/afterinstallv2.pdf


-Andy
PB7B/KB7B
7583


On Jan 12, 2018, at 1:39 PM, Lu V <luvencl8 at gmail.com> wrote:

> I have never had to tweak this parameter yet but I do now as I am adding a repeater to my node via remote RF link.  I don’t recall where this is performed. Can someone remind me which parameter and which file I need to tweak to remove pulse back or equivalent?  What I’m referring to is where a COR is present upon push to talk release for a second. I need to compensate for a remote link that has a repeater tail timer of one second that I don’t want to have sent out to the network of connected repeaters. 
> Thanks in advance. 
> 
> Sent from my iPhone, Lu Vencl
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180112/f0b41dfc/attachment.html>