[App_rpt-users] Short repeat of audio after unkey

[Bryan Taylor]

500msec hangtime not 50 seconds

Sent from my iPhone

> On Jan 27, 2018, at 11:59 PM, Bryan Taylor <overnite at me.com> wrote:
> 
> 
> Hopefully a simple question, setup a new node today, full duplex repeater, with full duplex in simpleusb.conf set to 1, duplex set to 2 in rpt.conf. 50sec Hangtime and courtesy tone as well. 
> 
> When someone keys up and says 123, Then Unkeys he hears himself say  3.
> 
> Is this something fixable in software? Incorrect configuration maybe?
> Thanks
> Bryan
> Vo1mxz
> 
> 
> Sent from my iPhone
> 
>> On Jan 22, 2018, at 12:16 PM, Loren Tedford <loren at lorentedford.com> wrote:
>> 
>> Here  is what i get from my repeater site
>> 
>> root at rpt:~# dahdi_test -c 100
>> Opened pseudo dahdi interface, measuring accuracy...
>> 99.996% 99.997% 99.991% 99.997% 99.998% 99.995% 99.998% 99.989%
>> 99.996% 99.995% 99.997% 99.996% 99.996% 99.998% 99.996% 99.999%
>> 99.995% 99.996% 99.996% 99.993% 99.996% 99.996% 99.996% 99.999%
>> 99.993% 99.997% 99.996% 99.996% 99.996% 99.996% 99.996% 99.996%
>> 99.995% 99.995% 99.987% 100.000% 99.993% 99.996% 99.997% 99.990%
>> 99.997% 99.995% 99.997% 99.997% 99.995% 99.998% 99.995% 99.996%
>> 99.997% 99.995% 99.999% 99.994% 99.995% 99.999% 99.995% 99.996%
>> 99.987% 99.996% 99.997% 99.995% 99.997% 99.995% 99.996% 99.997%
>> 99.994% 99.997% 99.998% 99.994% 99.997% 99.998% 99.999% 99.992%
>> 99.996% 99.998% 99.991% 99.997% 99.989% 99.996% 99.997% 99.996%
>> 99.997% 99.988% 99.997% 99.998% 99.994% 99.998% 99.995% 99.997%
>> 99.996% 99.996% 99.996% 99.995% 99.998% 99.996% 99.995% 99.996%
>> 99.995% 99.997%
>> --- Results after 98 passes ---
>> Best: 100.000% -- Worst: 99.987% -- Average: 99.995637%
>> Cummulative Accuracy (not per pass): 99.996
>> root at rpt:~#
>> 
>> 
>> Here is what I get from the Data Center  Hub.. Not yet aware of any issues but maybe i do have some thing going  on too..
>> 
>> root at uhf:~# dahdi_test -c 100
>> Opened pseudo dahdi interface, measuring accuracy...
>> 99.612% 99.607% 99.609% 99.612% 99.998% 99.994% 99.610% 99.607%
>> 100.000% 99.158% 99.152% 99.999% 100.000% 99.998% 98.729% 98.730%
>> 99.611% 99.608% 99.999% 99.994% 99.997% 99.996% 99.997% 100.000%
>> 99.999% 99.608% 99.994% 99.614% 99.994% 99.999% 99.616% 99.609%
>> 99.997% 99.993% 99.998% 99.998% 99.998% 99.617% 99.611% 99.611%
>> 99.998% 99.607% 99.994% 99.991% 99.998% 99.998% 99.997% 99.994%
>> 99.997% 99.615% 99.999% 99.607% 99.999% 99.997% 99.607% 99.994%
>> 99.604% 99.998% 99.998% 99.995% 99.997% 99.996% 99.999% 99.998%
>> 99.995% 99.992% 99.623% 99.609% 99.612% 99.611% 99.988% 99.628%
>> 99.612% 99.615% 99.612% 99.616% 99.613% 99.999% 99.995% 99.998%
>> 99.615% 99.612% 99.994% 100.000% 99.996% 98.104% 98.102% 99.999%
>> 99.591% 99.605% 99.980% 99.999% 100.000% 99.996% 99.999% 99.996%
>> 99.998% 99.998%
>> --- Results after 98 passes ---
>> Best: 100.000% -- Worst: 98.102% -- Average: 99.781178%
>> Cummulative Accuracy (not per pass): 99.998
>> root at uhf:~#
>> 
>> 
>> I hope this helps.
>> 
>> 
>> Loren
>> 
>> 
>>> On 1/22/2018 7:36 AM, Pierre Martel wrote:
>>> dahdi_test -c 100
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180127/8f0466c5/attachment.html>