[App_rpt-users] cw id with two nodes on server

[Tim Sawyer]

That's right.  It's an old bug. Only one [morse] stanza will work.

On Tue, Jan 30, 2018 at 11:20 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:

> Same here. It seems to respond to the fist [Morse] stanza.
>
> Thanks,
> Bob
> K6ECM
> 73
>
>
> > On Jan 30, 2018, at 10:25 AM, ars.w5omr at gmail.com wrote:
> >
> > I ran into that years ago. There's only one stanza on a machine in
> rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
> >
> > You 'can' define a voice ID on the 'other' node and have it default to
> CW when in 'polite' mode, but it will revert to whatever is in the CW ID
> stanza.
> >
> > 73 = Best Regards
> > Geoff/W5OMR
> > (29655/56/57)
> >> On Jan 30, 2018 04:18, Bryan Fields <bryan at bryanfields.net> wrote:
> >>
> >>
> >>
> >>> On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems at mycns.net> wrote:
> >>>
> >>> I am running 2 nodes    1994 and 1996 on this server with programed as
> below cw Id is good on mode 1996  not good on 1994 if I change the node
> number [morse1996] to [morse1994]  the problem reverses to the other
> node.Does this file need to be duplicated for both nodes?
> >>>
> >>> ; Morse code parameters, these are common to all repeaters.
> >>> ;
> >>> [morse1996]
> >>>
> >>> speed=20
> >>> frequency=800
> >>> amplitude=4096
> >>> idfrequency=750
> >>> idamplitude=1024
> >>
> >>
> >> How is your node configured?  You need to reference the Morse stanza in
> both node stanzas.
> >>
> >>
> >> 73
> >> --
> >> Bryan Fields
> >> M: +1-727-409-1194
> >>
> >>
> >>
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180130/0ba6703f/attachment.html>