[App_rpt-users] URI-X Issues With New Raspbian build

[JJC]

It’s worth looking into, honestly I think it’s a missing shared object snd_something_oss.so that’s not creating the /dev/dsp path, once I’m done driving home today I’ll be checking into it and letting everyone know.  I think that when I did the minimal raspbian install some things were not built by default etc....

Sent from the iRoad

> On Jul 8, 2018, at 09:44, Mike <mm at midnighteng.com> wrote:
> 
> Well,
> 
> this may not be relevant, but worth saying at this point.
> 
> I have found that if you initialize a pi node while not supplying the Pi board with enough current
> 
> during the initial start-up. Many things seem to go wrong.
> 
> I'm building a bigger 5v power supply to handle 2 or three of these at once to verify what I'm thinking,
> 
> but not tested anything yet.
> 
> In my case, it is Dahdi
> 
> So, just something to look at and if it appears to be likely,
> 
> I would say get the required current supplied and start anew with a fresh img.
> 
> Not sure if it helps, but something to look for.
> ...mike/kb8jnm
> 
>> On 7/8/2018 9:44 AM, JJC wrote:
>> Not sure why but the /dev/dsp1 seems to be missing... I've installed oss-compat and tried a number of things.. see below output...
>> 
>> $ sudo uridiag
>> URIDiag, diagnostic program for the DMK Engineering URI
>> USB Radio Interface, version 0.9, 08/14/15
>> 
>> Found CM119 USB Radio Interface at 001/005
>> Unable to re-open DSP device 1: /dev/dsp1
>> 
>>> On Sat, Jul 7, 2018 at 10:44 PM JJC <cummingsj at gmail.com> wrote:
>>> Didi a fresh install of the latest ASL from the repo on a fresh install of raspbian on an RPI 3.  The issue is simple... the pi sees the URI but ASL seems to have issues.. 
>>> 
>>> I have included sample output from a variety of commands below which clearly details the underlying OS sees the URI as it should, and the given address etc...
>>> 
>>> see the example output below...
>>> 
>>> taken from /var/log/asterisk/messages
>>> [Jul  7 22:19:46] WARNING[6703] chan_usbradio.c:                     Loaded parameters from usbradio_tune_usb.conf for device usb .
>>> [Jul  7 22:19:46] WARNING[6703] chan_usbradio.c:                     Unable to re-open DSP device 1 (usb): No such file or directory
>>> 
>>> $ cat /proc/asound/cards
>>>  0 [ALSA           ]: bcm2835_alsa - bcm2835 ALSA
>>>                       bcm2835 ALSA
>>>  1 [Device         ]: USB-Audio - USB PnP Sound                   Device
>>>                       C-Media Electronics Inc. USB PnP Sound Device at usb-3f980000.usb-1.1.3, full s
>>> 
>>> $ lsusb
>>> Bus 001 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
>>> Bus 001 Device 005: ID 0d8c:013a C-Media Electronics, Inc.
>>> Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp.
>>> Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
>>> Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>> 
>>> $ cat /etc/asterisk/usbradio_tune_usb.conf
>>> [usb]
>>> ; name=usb
>>> ; devicenum=1
>>> devstr=1-1.1.3:1.0
>>> rxmixerset=500
>>> txmixaset=450
>>> txmixbset=500
>>> rxvoiceadj=0.557342
>>> rxctcssadj=0.930165
>>> txctcssadj=220
>>> rxsquelchadj=754
>>> fever=1
>>> 
>>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180708/7cbf50c9/attachment.html>