[App_rpt-users] URI-X Issues With New Raspbian build

Tue Jul 10 13:53:56 UTC 2018

and presumably it didn't work, I thought I saw an email where you said that
but I never found it again lol... in any case I may go back to an old
kernel where OSS isn't marked broken.. sigh evidently that broke sound for
lots of things not just ASL.

On Tue, Jul 10, 2018 at 3:34 AM Steve Zingman <szingman at msgstor.com> wrote:

> Yes I did.
>
> On 07/09/2018 11:54 PM, JJC wrote:
>
> Steve - you said that you have tried osspd?
>
> On Mon, Jul 9, 2018 at 9:51 PM JJC <cummingsj at gmail.com> wrote:
>
>> What a pain, this is the issue right here that I have been fighting lol:
>>
>> https://github.com/raspberrypi/linux/issues/2496
>>
>> On Mon, Jul 9, 2018 at 1:47 PM Mike <mm at midnighteng.com> wrote:
>>
>>> This worked for me !
>>>
>>>
>>> http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme
>>>
>>> Up and running with a new touch screen to boot  !
>>>
>>>
>>> Got some cute plans if I getm done.
>>>
>>>
>>> ...mike/kb8jnm
>>>
>>> On 7/9/2018 12:57 PM, JJC wrote:
>>>
>>> understood, thank you for the info.. as long as I can build a process
>>> then I'm good to go....
>>>
>>> On Mon, Jul 9, 2018 at 10:29 AM Steve Zingman <szingman at msgstor.com>
>>> wrote:
>>>
>>>> cd /usr/src/asl-dahdi-linux-2.11.1/linux/
>>>> make
>>>> make install.
>>>>
>>>> Be aware, if you build a custom kernel, you will need to make sure the
>>>> headers match. If you are going to do this, build the kernel first. Verify
>>>> OSS is working. that prepare the headers and rebuild DAHDI.
>>>> If you use the image and put the kernel and headers on hold, you will
>>>> be able to do a apt-get upgrade safely.
>>>>
>>>> Steve
>>>>
>>>> On 7/9/2018 11:30 AM, JJC wrote:
>>>>
>>>> So that is to say that I did a clean build (minimal) using the latest
>>>> raspbian... followed the simple directions here:
>>>> https://wiki.allstarlink.org/wiki/ASL_FAQ and ASL started up... (other
>>>> than ASL recognizing the URI per the original post)... as one of the
>>>> troubleshooting steps I reinstalled the raspberrypi-kernel-headers which
>>>> broke dahdi and that's where I am now.. a broken dahdi install
>>>>
>>>> On Mon, Jul 9, 2018 at 8:08 AM JJC <cummingsj at gmail.com> wrote:
>>>>
>>>>> Yeah but I didn’t use the image, I used your apt repo
>>>>>
>>>>> Sent from the iRoad
>>>>>
>>>>> > On Jul 9, 2018, at 07:31, Steve Zingman <szingman at msgstor.com>
>>>>> wrote:
>>>>> >
>>>>> > <
>>>>> http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme
>>>>> >
>>>>> > Also included in the zip.
>>>>> >
>>>>> >> On 7/9/2018 9:20 AM, JJC wrote:
>>>>> >> I didn’t see the requirement to hold those in any of the
>>>>> documentation that I read, maybe I just overlooked it....
>>>>> >>
>>>>> >> I’ll see what I can do today to fix the new (dahdi) issues.... and
>>>>> then the dsp issue....
>>>>> >>
>>>>> >> Sent from the iRoad
>>>>> >>
>>>>> >>>> On Jul 9, 2018, at 07:06, Bryan Fields <Bryan at bryanfields.net>
>>>>> wrote:
>>>>> >>>>
>>>>> >>>> On 7/8/18 12:44 AM, JJC wrote:
>>>>> >>>> Didi a fresh install of the latest ASL from the repo on a fresh
>>>>> install of
>>>>> >>>> raspbian on an RPI 3.  The issue is simple... the pi sees the URI
>>>>> but ASL
>>>>> >>>> seems to have issues..
>>>>> >>> Did you follow the readme and do:
>>>>> >>> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel ?
>>>>> >>>
>>>>> >>>> I have included sample output from a variety of commands below
>>>>> which
>>>>> >>>> clearly details the underlying OS sees the URI as it should, and
>>>>> the given
>>>>> >>>> address etc...
>>>>> >>>>
>>>>> >>>> see the example output below...
>>>>> >>>>
>>>>> >>>> taken from /var/log/asterisk/messages
>>>>> >>>> [Jul  7 22:19:46] WARNING[6703] chan_usbradio.c: Loaded
>>>>> parameters from
>>>>> >>>> usbradio_tune_usb.conf for device usb .
>>>>> >>>> [Jul  7 22:19:46] WARNING[6703] chan_usbradio.c: Unable to
>>>>> re-open DSP
>>>>> >>>> device 1 (usb): No such file or directory
>>>>> >>> Yea, newest raspbian removed the support for /dev/dsp (OSS) in the
>>>>> stock
>>>>> >>> kernel.  Holding back the old kernel will prevent you from needing
>>>>> to
>>>>> >>> recompile the "new" kernel to get OSS back in it.  The wrapper
>>>>> will not work
>>>>> >>> as the modules depend on this.
>>>>> >>>
>>>>> >>> Sorry for the delay, been traveling :(
>>>>> >>>
>>>>> >>> --
>>>>> >>> Bryan Fields
>>>>> >>>
>>>>> >>> 727-409-1194 - Voice
>>>>> >>> http://bryanfields.net
>>>>> >>> _______________________________________________
>>>>> >>> App_rpt-users mailing list
>>>>> >>> App_rpt-users at lists.allstarlink.org
>>>>> >>>
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> >>>
>>>>> >>> To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>> press the "Unsubscribe or edit options button"
>>>>> >>> You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>> the list detailing the problem.
>>>>> >> _______________________________________________
>>>>> >> App_rpt-users mailing list
>>>>> >> App_rpt-users at lists.allstarlink.org
>>>>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> >>
>>>>> >> To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>> press the "Unsubscribe or edit options button"
>>>>> >> You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>> the list detailing the problem.
>>>>> >
>>>>> > _______________________________________________
>>>>> > App_rpt-users mailing list
>>>>> > App_rpt-users at lists.allstarlink.org
>>>>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> >
>>>>> > To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>> press the "Unsubscribe or edit options button"
>>>>> > You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>> the list detailing the problem.
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180710/bd3763af/attachment.html>