[App_rpt-users] GPS hardware recommendation for RTCM Voting

Tue Jun 12 22:45:36 UTC 2018

Precisely. That you.

On Tue, Jun 12, 2018 at 6:40 PM Joe Moskalski <kc2irv at gmail.com> wrote:

> You can in a non-simulcast configuration using a single transmitter and
> voting receivers if that is what you are looking at doing.
>
> On Jun 12, 2018 6:35 PM, "Sean McCarthy" <smccarthy61 at gmail.com> wrote:
>
> That looks perfect. You mentioned you use them on your "RX only" sites,
> any reason I couldn't use this at the prime site as well?
>
> System: VHF MTR2000 Repeater with 2 MTR2000 Receivers (for now)
>
> On Tue, Jun 12, 2018 at 5:15 PM Joe Moskalski <kc2irv at gmail.com> wrote:
>
>> I have used this for RX only sites and they work great with an external
>> antenna and will power an antenna if you get the inductor required to pass
>> the DC and an SMA connector. You need to change the jumper setting to TTL.
>> You can power the QLG1 from the RTCM itself.
>>
>> On Jun 12, 2018 5:08 PM, "Kevin Walsh" <w8khw1 at gmail.com> wrote:
>>
>> I have used the QRP Labs QLG1 GPS modules at several locations and
>> especially for portable receivers. You do need to change a jumper in the
>> RTCM to select TTL interfacing. They are $23 each in kit form, plus the
>> cost of an SMA PC mount connector for an external antenna. Really easy to
>> assemble and they acquire/lockup quickly.
>>
>> Https://www.qrp-labs.com/qlg1.html
>>
>> Kevin
>>
>> On Jun 12, 2018, at 4:47 PM, Sean McCarthy <smccarthy61 at gmail.com> wrote:
>>
>> That unit does look nice, but relatively pricy. Seeing as I don't need
>> the hi-stab, I was hoping for a lower cost option.
>>
>>
>> On Tue, Jun 12, 2018 at 1:42 PM Joe Moskalski <kc2irv at gmail.com> wrote:
>>
>>> The BG7TBL units are the best bang for your buck and support external
>>> 3.3v powered antennas.
>>>
>>> On Tue, Jun 12, 2018, 12:50 PM Sean McCarthy <smccarthy61 at gmail.com>
>>> wrote:
>>>
>>>> Looking for advice on selecting GPS units for an RTCM voting project. I
>>>> need units that support external active antennas.
>>>>
>>>> Thanks,
>>>> Sean
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180612/b7cb22c3/attachment.html>