[App_rpt-users] Announcing AllStarLink Asterisk version 1.01

Fri Jun 15 14:20:36 UTC 2018

Disregard, funny the trouble you can get into when you clean out your 
archive email and walk away from the computer for a while and forget 
where you are when you come back   ....LOL

...mike/kb8jnm


On 6/15/2018 10:17 AM, Mike wrote:
>
> Use root since you have a root pw. That will allow you to do anything 
> without further issues.
>
> ...mike/kb8jnm
>
>
> On 4/20/2018 3:00 PM, K5CG wrote:
>> Starting over.
>>
>> Brand new Pi 3 B +
>> Formatted microSD card with SD Formatter.
>> Re-flashed microSD card with Win32 Disk Imager
>> Booted, "Resized root filesystem... rebooting"
>>
>> Logged in as repeater
>> Changed password for "repeater" user
>> /sudo su -/    to become root
>> /passwd/    to set root user password
>> Edited /etc/ssh/sshd_config to enable root login
>> /systemctl restart ssh/   to refresh sshd config
>>
>> ip addr
>> 192.168.1.225/24 (from DHCP)
>> ssh to 192.168.1.225 as root user
>>
>> root at repeater:~# apt-mark hold raspberrypi-kernel-headers 
>> raspberrypi-kernel
>> raspberrypi-kernel-headers set on hold.
>> raspberrypi-kernel set on hold.
>>
>> root at repeater:~#apt-get update
>> Fetched 11.9 MB in 8s (1,361 kB/s)
>> Reading package lists... Done
>>
>> root at repeater:~# apt-get upgrade -y
>> Preparing...
>> Unpacking...
>> Yadda yadda...
>> Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ...
>> Setting up libicu57:armhf (57.1-6+deb9u2) ...
>> Setting up raspi-config (20180406+1) ...
>> Setting up perl (5.24.1-3+deb9u3) ...
>> Setting up libssl1.0.2:armhf (1.0.2l-2+deb9u3) ...
>> Processing triggers for libc-bin (2.24-11+deb9u3) ...
>> Setting up libssl1.1:armhf (1.1.0f-3+deb9u2) ...
>> Processing triggers for systemd (232-25+deb9u2) ...
>> Setting up openssl (1.1.0f-3+deb9u2) ...
>> Processing triggers for man-db (2.7.6.1-2) ...
>> Setting up asl-asterisk-tools (1.01-20180226-10) ...
>> Setting up libraspberrypi0 (1.20180417-1) ...
>> Setting up libraspberrypi-doc (1.20180417-1) ...
>> Setting up libraspberrypi-dev (1.20180417-1) ...
>> Setting up libraspberrypi-bin (1.20180417-1) ...
>> Processing triggers for libc-bin (2.24-11+deb9u3) ...
>>
>> root at repeater:~# reboot
>>
>> Now that the initial steps are done, do I run asl-menu as the user 
>> repeater or root? The readme isn't specific.
>>
>>
>> ------------------------------------------------------------------------
>> *From: *"Steve Zingman" <szingman at msgstor.com>
>> *To: *"Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org>
>> *Sent: *Friday, April 20, 2018 1:12:01 PM
>> *Subject: *Re: [App_rpt-users] Announcing AllStarLink Asterisk 
>> version 1.01
>>
>> Danny,
>> Did you do this before asl-menu?
>>
>> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel
>> sudo apt-get update
>> sudo apt-get upgrade -y
>> sudo reboot
>>
>> Steve N4IRS
>>
>> On 4/20/2018 2:09 PM, K5CG wrote:
>>
>>     I downloaded the raspberry pi latest
>>     http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip
>>
>>     I followed the included readme file instructions and It booted
>>     fine but the asl-menu does not work correctly for the networking
>>     (static IP), and it doesn't set the hostname or domain name.
>>     After rebooting at the end of the process everything is the same
>>     as it was. Hostname is still "repeater" and IP is still DHCP.
>>
>>     I seem to recall having this issue before on an older build. Is
>>     there a trick to get this to work or must it be done manually?
>>
>>     Danny
>>     K5CG
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180615/f9b2b7a1/attachment.html>