[App_rpt-users] ASL Digital Radio/MMDVM Intro Tech "NET" Tues

[Steve Zingman]

Jeff,
It would be MOST appreciated if you could stitch together a archive.
Mike started and stayed on 2600 throughout. I started on 29999 and 
switched to 2600 when the problems arose.

Steve

On 6/20/2018 3:07 PM, Jeff DePolo wrote:
>>> was in audio file made of the net i didn't get stay for it
>>> jimmy ka3vgm
>> Not this time. We will do the presentation again and make
>> sure there is
>> a audio archive.
>>
>> Steve
> I should have an audio archive.  I can concatenate the files and shrink them
> into a reasonable-bitrate MP3 or AAC if there is interest; please respond if
> interested.  I had 2300 linked to 2600 for the duration (2300 was logging
> audio).  While there were a few occasions where it seemed like Steve or Mike
> had lost connectivity for a few seconds, for the most part it was solid, no
> disconnects/reconnects or anything that I noticed between here and 2600.
> 2600 seemed to have fewer issues than some of the other hubs; others were
> reporting things like "we only heard 10% of what you said last time", yet I
> heard it fine via 2600/2300.  Steve and Mike, were you using 2600 as your
> entry point?
>
> 				--- Jeff WN3A
>
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.