[App_rpt-users] installing allstarlink

Tue Jun 26 15:02:28 UTC 2018

Hello Dale,

Login and run "sudo asl-menu"

GM300
Programmed with Pl. Use Simple-USB-Radio

Not programmed with PL. I would use USB-Radio.

Save and reboot.

I'll post the tune tonight.

David

On Tue, Jun 26, 2018, 7:47 AM Mike <mm at midnighteng.com> wrote:

> While I have 'NO' experience with the DMK interface,
>
> I still suggest you try to make this run 'headless' first.
>
> Then you can separate core issues of the system with the radio interface
> side of it.
>
> If the system isn't functioning as it should, you will never know if the
> radio's are.
>
> I am hoping someone with experience with the DMK will chime in but you
> need to specify a issue to respond to, specifically.
>
> Show the code you are having issues with etc.
>
> Give us a starting point. Most here are very helpful, give them a chance.
>
> ...mike/kb8jnm
>
> On 6/26/2018 10:08 AM, Dale Day wrote:
>
> Thank you so much for your reply.
> I have the latest download of Debian from Allstar link. I have it
> installed on a amd desk top pc and then it linked to pm windows pc with
> putty.
> I have a dmk engineering usb radio interface to a Motorola gm300 type
> radio.
> I understand this is very difficult to do over email but I have worked on
> this off and on for two years and I am just at wits end. I go through the
> asl-menu and have it configured the static ip address and have signed up
> with Allstar and have my numbers and passwords with server and my pc.
> My problem is when I try to go to tune radio menu it comes up with a
> message that I don't have rpt file and another one I cant remember with out
> going and firing up pc again and refreshing my memory not configured.
> So in other words I just don't know which of the hundreds of lines in the
> files usb radio, simpleusb or other files need to be modified.
> I will keep reading the help files and and k5tra's web site but I just
> can't seem to get the files configured right.
> Thanks so much
> Dale
> N0INX
>
> On Mon, Jun 25, 2018 at 11:58 PM, Mike <mm at midnighteng.com> wrote:
>
>> Well,
>>
>> I am not sure what you are using for hardware and what versions of
>> software as you did not say.
>>
>> SO here is my advise for anyone.
>>
>> Make the box work 'headless', meaning without the radios in the setup
>> fray.
>>
>> Use this setting by un/commenting the following lines as shown here in
>> your rpt.cong file so you are using dahdi/pseudo and not radio interfaces.
>>
>> rxchannel = dahdi/pseudo            ; No radio (hub)    ******************
>> ; rxchannel = SimpleUSB/usb_29999    ; SimpleUSB
>> ; rxchannel = Pi/1                      ; Raspberry Pi PiTA
>> ; rxchannel = Radio/usb_29999        ; USBRadio (DSP)
>> ; rxchannel = Dahdi/1            ; PCI Quad card
>> ; rxchannel = Beagle/1            ; BeagleBoard
>> ; rxchannel = USRP/127.0.0.1:34001:32001; GNU Radio interface USRP
>>
>> duplex = 2                              ; 0 = Half duplex with no
>> telemetry tones or hang time.
>>
>>
>> Then setup iaxrpt to run with that node so you can check it for
>> functionality of a running asterisk install without the radio side of the
>> equation.
>>
>> You will have to read some more of the docs most likely to get this far,
>> but once you do, you are most of the way there.
>>
>> You should be able to 'command' your node with functionality before
>> adding radios to your learning curve.
>>
>> But you will need to ask 'specific questions' to what you do not
>> understand to get help.
>>
>>
>> ...mike/kb8jnm
>>
>> On 6/25/2018 9:38 PM, Dale Day wrote:
>>
>> Could someone help me with getting allstar link up and running.
>> I just can't allstar configured correctly to the point where I can tune
>> the radios.
>> I just don't understand what I am doing wrong.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180626/a6003395/attachment.html>