[App_rpt-users] iaxrpt
Bob Pyke
k6ecm1 at gmail.com
Fri Jun 29 19:20:48 UTC 2018
ASL is setup to look for public domain IP addresses. To connect a local IP address I.e. 192... to a 192.. you need to tell the other node which local address is used by the other node. This is entered in the rpt.config file in the [nodes] stanza.
Thanks,
Bob
K6ECM
73
> On Jun 29, 2018, at 9:26 AM, mwbesemer at cox.net wrote:
>
> Correct. I have my account configured for a private (internal) connection on 192.xxx.xxx.xxx and for a public (external) connection on 174.xxx.xxx.xxx. The 174.xxx.xxx.xxx works fine, but not the 192.xxx.xxx.xxx.
>
> Will troubleshoot further as soon as the boss lets me go home !
>
> Tnx,
>
> Mike
> WM4B
>
>
> On Fri, Jun 29, 2018 at 12:16 PM, David Shaw wrote:
>
> If your using a public domain name then yes. If you are using your LAN IP address for your node, then no. Good to see your using your DHCP server to assign a fixed IP address. So you should be going straight to your node then.
>
> Private IP Adresses Network
> 10.0.0.0 - 10.255.255.255
> 172.16.0.0 - 172.31.255.255
> 192.168.0.0 - 192.168.255.255
> If your IP Address is outside the above ranges then it's on the public (WWW) domain.
>
>
>
>
>
> W9SH Steve's iaxRpt software:
>
>
> Options>Accounts
> Host: Just use the IP Address only. No need for the default port. (4569) The only time you would use :port is if it was different then 4569.
>
>
> Options>Preferences>IAX2 is where you can change the default port.
>
>
> When you click Connect what error do you get on the bottom?
>
>
> You can also see what asterisk is seeing when you try to login.
>
>
> sudo asterisk -vvvvvvvvvvvvvvr
>
>
> Here is my output when I login
> asl2083*CLI>
> -- Accepting AUTHENTICATED call from 172.16.11.10:
> > requested format = gsm,
> > requested prefs = (),
> > actual format = gsm,
> > host prefs = (ulaw|adpcm|gsm),
> > priority = mine
> -- Executing [2083 at iaxrpt:1] Rpt("IAX2/iaxrpt-6838", "2083|X") in new stack
> Node Variable dump for node 2083:
> RPT_NUMLINKS=0
> RPT_LINKS=0
> RPT_NUMALINKS=0
> RPT_ALINKS=0
> RPT_TXKEYED=0
> RPT_ETXKEYED=0
> RPT_RXKEYED=0
> RPT_AUTOPATCHUP=0
> -- 8 variables
> == Spawn extension (iaxrpt, 2083, 1) exited KEEPALIVE on 'IAX2/iaxrpt-6838'
>
> Here is the output of a bad login. Wrong Username
> asl2083*CLI>
> [Jun 29 09:01:43] NOTICE[411]: chan_iax2.c:9459 socket_process: Host 172.16.11.10 failed to authenticate as iaxrpt1
>
>
> You can also use tcpdump to see connections to and from your node.
>
> sudo apt-get install tcpdump
>
> After tcpdump is installed run
>
> sudo tcpdump -n "src host 172.16.11.10 and port 4569"
> or
> sudo tcpdump -n "src host 172.16.11.10 and not dst port 22"
>
> replace 172.16.11.10 with your windows IP address.
>
> Ctrl c to stop
>
> David
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
> Thomas Jefferson
>
> On Fri, Jun 29, 2018 at 7:49 AM, < mwbesemer at cox.net> wrote:
> David,
>
> WRT your first statement, if I'm connecting via my Windows machine to my local IP, am I really exiting my LAN and coming back in? Or am I routing straight to the IP of my node. I have DD-WRT on my router have have the port forwarded. (I really expect my problem to be there - port forwarding has historically bit me in the butt.) BTW, my node is set for DHCP, but in the router, I have that MAC address assigned to a fixed IP address.
>
> I've tried using xxx.xxx.xxx.xxx:4569 and that doesn't help.
>
> I probably confused people by referencing the hamvoip document. I'm using ASL, but the hamvoip document was recommend to me as a guide to set up iaxrpt on my node.
>
> I'll try the traccert tonight when I get home.
>
> Many thanks,
>
> Mike
> WM4B
>
> On Fri, Jun 29, 2018 at 10:18 AM, David Shaw wrote:
>
> Most new routers won't allow you to exit the local network (LAN) and come
> back in. This might happen if you use a domain name that is associated with
> your public address. If you want to use your public domain name to access
> your node from inside your LAN. You'll need to add a DNS entry to your
> router. **See "Side Note" below
>
> By default IAX2 uses UDP port 4569 and the bind address is set to all
> interfaces/addresses in the ASL OS ( allstarlink.org). As for the hamvoip.com
> settings, you should check with them.
>
> Are you using the hostname or IP address to access your node?
> Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices.
>
> Testing:
> From your windows based computer. Try tracert and the IPaddress of the node.
>
> tracert 192.168.x.x
>
> 1 <1 ms <1 ms <1 ms 192.168.x.x
>
> There should be only one hope to your node if your windows computer in on
> the same network.
>
> Side note:
> I use dhcp on all my nodes on my LAN networks. I give them static address
> via the DHCP server. I also change the hostname on the node. i.e. asl2060
> This allows the router's internal DNS server to associate the hostname and
> IP address for the ASL node. Some routers will allow you to add a domain
> name.
> Also there is no need to open TCP port forwarding on you router for IAX2
> 4569.
>
> David
>
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
> Thomas Jefferson
>
> On Fri, Jun 29, 2018 at 3:58 AM, < mwbesemer at cox.net> wrote:
>
> No. I've never seen reference to that. I'm still in the initial phase of
> setting up this node; have not messed with rpt.conf yet.
>
> Mike
> WM4B
>
>
> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
>
> Did you add your local node address for each node in the rpt,conf [nodes]
> stanza?
> Thanks,
> Bob
> K6ECM
> 73
>
>
> On Jun 28, 2018, at 6:12 PM, Mike < mm at midnighteng.com> wrote:
>
>
> Mike,
>
> Still a lot of possibilities of things that may not be right but,
>
> Just so that you are conducting a 'good test' behind your nat through
> wifi,
>
> put your phone in airplane mode, then turn just the wifi on and connect.
>
> You might also want to turn the forwarding to just the UDP 4569 and
> specify that in your phone connect,
>
> guessing your using the android iaxrpt.... like this for your IP...
>
> 192.169.1.101:4569 < :port especially if not the norm, but do it
> anyway.
> That's a few things to investigate anyway,
>
> Let me know if your still having issues.
>
> Oh... don't forget to get back out of airplane mode / turn cellular back
> on when done.
>
> Hate to see ya late for dinner ...lol
> ...mike/kb8jnm
>
> On 6/28/2018 8:00 PM, Mike Besemer wrote:
> Making progress on my node. After several false starts I finally got
> the node connected and am able to connect via iaxrpt from my Android
> devices if I use my EXTERNAL IP address.
>
> I cannot connect from Android or Windows using my INTERAL IP address. I
> followed the guide at hamvoip.comand have double checked everything.
>
> The port is open for both UDP and TCP connections. The firewall seems
> ok.
>
> It has to be something obvious. What did I miss?
>
> Mike
>
> WM4B
>
>
>
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlin k.org
>
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>
> To unsubscribe from this list please visit
>
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
> and scroll down to the bottom of the page. Enter your email address and
> press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlin k.org
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-usersand
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> ----------------------------- -
>
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlin k.org
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/c
> gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlin k.org
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/c
> gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> ----------------------------- -
>
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlin k.org
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlin k.org
> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180629/7453a9e2/attachment.html>
More information about the App_rpt-users
mailing list