[App_rpt-users] iaxrpt

Sat Jun 30 15:34:09 UTC 2018

Hello Mike,

If your problem is with the android app. You need to make some changes.

You will need to edit iax.conf and extensions.conf

Howto:
cd /etc/asterisk

sudo nano iax.conf

[CallSign]                                ; Connect from iaxrpt Username
field (PC AllStar Client)
type = friend                             ; Notice type is user here
<---------------
context = radio-gui                        ; Context to jump to in
extensions.conf
auth = md5
secret = password
host = dynamic
disallow = all
allow = ulaw
transfer = no

sudo nano extensions.conf

[radio-gui]
exten => 2060,1,rpt,2060|X

David

--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson

On Sat, Jun 30, 2018 at 6:38 AM, Mike Besemer <mwbesemer at cox.net> wrote:

> Tried all and failed.  Also tried from my Windows tablet and Android
> table, both via my Wifi.
>
> I’m WAY beyond perplexed!
>
> Mike
> WM4B
>
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
> On Behalf Of David Shaw
> Sent: Friday, June 29, 2018 6:43 PM
> To: Users of Asterisk app_rpt
> Subject: Re: [App_rpt-users] iaxrpt
>
> Hey Mike the stanza is fine.
>
> [Nodes]
> 48166 = radio at 127.0.0.1:4569/48166,NONE
> This just tells Asterisk (ASL) where node 48166 is. The 127.0.0.0/8 is
> used by the server. This is OK.
>
> This is what we know as of now:
> ASL is setup and working to allow connection on port 4569. You have
> iax2.conf configured to allow a user to login. I would say ASL is setup and
> working.
>
> If your computer is on the same subnet as your ASL node.
>
> I would check:
> Windows Firewall
> Windows Anti-Virus
>
> Wireless access point turn off AP Isolation
> https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_
> settings#AP_Isolation
>
> Router turn any network Isolation
> https://wiki.dd-wrt.com/wiki/index.php/Guest_Network#Guest_
> Access_to_a_Network_Device
>
>
>
> David
>
>
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
> Thomas Jefferson
>
> On Fri, Jun 29, 2018 at 2:00 PM, Mike Besemer <mwbesemer at cox.net> wrote:
> Here's what I've got so far.
>
> tracert reports 1     hop: 1     2ms     2ms    2ms     RaspberryPi
>  192.168.x.x
>
> Android Phone connected to Verizon network:  Good connect via the external
> IP
> Android Phone in Airplane mode connected to my wireless network: No connect
> Windows Computer connected to my wireless network: No connect
>
> So, it seems to be an internal/external IP issue rather than an
> Android/Windows issue - which is what I had originally thought.  That
> should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct
> - at least for the android phone.  (The Android works on the external IP
> but not the internal IP, and that proves the stanzas are ok.)
>
> Tracert is reporting one hop from the Windows machine to the Pi - so the
> machines are seeing each other.
>
> Attached is a lousy photo of a netstat -pln run from the pi, but I don't
> know what I'm looking at.
>
> Mike
> WM4B
>
>
>
>
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
> On Behalf Of David Shaw
> Sent: Friday, June 29, 2018 10:19 AM
> To: Users of Asterisk app_rpt
> Subject: Re: [App_rpt-users] iaxrpt
>
> Most new routers won't allow you to exit the local network (LAN) and come
> back in. This might happen if you use a domain name that is associated with
> your public address. If you want to use your public domain name to access
> your node from inside your LAN. You'll need to add a DNS entry to your
> router. **See "Side Note" below
>
> By default IAX2 uses UDP port 4569 and the bind address is set to all
> interfaces/addresses in the ASL OS (allstarlink.org). As for the
> hamvoip.com settings, you should check with them.
>
> Are you using the hostname or IP address to access your node?
> Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices.
>
> Testing:
> From your windows based computer. Try tracert and the IPaddress of the
> node.
>
> tracert 192.168.x.x
>
> 1  <1 ms   <1 ms   <1 ms 192.168.x.x
>
> There should be only one hope to your node if your windows computer in on
> the same network.
>
> Side note:
> I use dhcp on all my nodes on my LAN networks. I give them static address
> via the DHCP server. I also change the hostname on the node. i.e. asl2060
> This allows the router's internal DNS server to associate the hostname and
> IP address for the ASL node. Some routers will allow you to add a domain
> name.
> Also there is no need to open TCP port forwarding on you router for IAX2
> 4569.
>
> David
>
>
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
> Thomas Jefferson
>
> On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer at cox.net> wrote:
> No.  I've never seen reference to that.  I'm still in the initial phase of
> setting up this node; have not messed with rpt.conf yet.
>
> Mike
> WM4B
>
>
> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
> Did you add your local node address for each node in the rpt,conf [nodes]
> stanza?
> Thanks,
> Bob
> K6ECM
> 73
>
> On Jun 28, 2018, at 6:12 PM, Mike <mm at midnighteng.com> wrote:
>
>
> Mike,
>
> Still a lot of possibilities of things that may not be right but,
>
> Just so that you are conducting a 'good test' behind your nat through wifi,
>
> put your phone in airplane mode, then turn just the wifi on and connect.
>
> You might also want to turn the forwarding to just the UDP 4569 and
> specify that in your phone connect,
>
> guessing your using the android iaxrpt....  like this for your IP...
>
> 192.169.1.101:4569   < :port especially if not the norm, but do it anyway.
> That's a few things to investigate anyway,
>
> Let me know if your still having issues.
>
> Oh... don't forget to get back out of airplane mode / turn cellular back
> on when done.
>
> Hate to see ya late for dinner ...lol
> ...mike/kb8jnm
> On 6/28/2018 8:00 PM, Mike Besemer wrote:
> Making progress on my node.  After several false starts I finally got the
> node connected and am able to connect via iaxrpt from my Android devices if
> I use my EXTERNAL IP address.
>
> I cannot connect from Android or Windows using my INTERAL IP address. I
> followed the guide at hamvoip.com and have double checked everything.
>
> The port is open for both UDP and TCP connections. The firewall seems ok.
>
> It has to be something obvious.  What             did I miss?
>
> Mike
>
> WM4B
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>      ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180630/a433b521/attachment.html>