[App_rpt-users] iaxrpt

Mike mm at midnighteng.com
Sat Jun 30 16:50:27 UTC 2018 

Since you are DHCP assigned by MAC, what are the dns servers in your 
router ?
Is one of the 3 potentials a local router dns address ?
It has to know how to get there. Router may need a internal DNS.

...mike/kb8jnm

On 6/30/2018 12:39 PM, Mike Besemer wrote:
> All,
> 
> It's not an Android issue.  Android works fine from an external IP but not from my Internal IP.  That should indicate that the stanza(s) are fine.
> 
> Mike
> WM4B
> 
> -----Original Message-----
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Mike
> Sent: Saturday, June 30, 2018 12:19 PM
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] iaxrpt
> 
> If he is to use that, he will also need a line in globals
> 
> like:  node = 12345
> 
> or replace both "${node}"  with the actual node number "12345".
> 
> ...mike/kb8jnm
> 
> On 6/30/2018 11:49 AM, David Shaw wrote:
>> Sorry Mike use this line in the extensions.conf
>>
>> [radio-gui]
>> exten => ${NODE},1,rpt(${NODE}|X)
>>
>>
>>
>> --
>> Thanks, David
>>
>> "Laws that forbid the carrying of arms...disarm only those who are neither
>> inclined nor determined to commit crimes. Such laws make things worse for
>> the assaulted and better for the assailants; they serve rather to encourage
>> than prevent homicides, for an unarmed man may be attacked with greater
>> confidence than an armed one."
>> Thomas Jefferson
>>
>> On Sat, Jun 30, 2018 at 8:34 AM, David Shaw <shawpbx at gmail.com> wrote:
>>
>>> Hello Mike,
>>>
>>> If your problem is with the android app. You need to make some changes.
>>>
>>> You will need to edit iax.conf and extensions.conf
>>>
>>> Howto:
>>> cd /etc/asterisk
>>>
>>> sudo nano iax.conf
>>>
>>>
>>> [CallSign]                                ; Connect from iaxrpt Username
>>> field (PC AllStar Client)
>>> type = friend                             ; Notice type is user here
>>> <---------------
>>> context = radio-gui                        ; Context to jump to in
>>> extensions.conf
>>> auth = md5
>>> secret = password
>>> host = dynamic
>>> disallow = all
>>> allow = ulaw
>>> transfer = no
>>>
>>>
>>> sudo nano extensions.conf
>>>
>>> [radio-gui]
>>> exten => 2060,1,rpt,2060|X
>>>
>>>
>>>
>>> David
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Thanks, David
>>>
>>> "Laws that forbid the carrying of arms...disarm only those who are neither
>>> inclined nor determined to commit crimes. Such laws make things worse for
>>> the assaulted and better for the assailants; they serve rather to encourage
>>> than prevent homicides, for an unarmed man may be attacked with greater
>>> confidence than an armed one."
>>> Thomas Jefferson
>>>
>>> On Sat, Jun 30, 2018 at 6:38 AM, Mike Besemer <mwbesemer at cox.net> wrote:
>>>
>>>> Tried all and failed.  Also tried from my Windows tablet and Android
>>>> table, both via my Wifi.
>>>>
>>>> I’m WAY beyond perplexed!
>>>>
>>>> Mike
>>>> WM4B
>>>>
>>>> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
>>>> On Behalf Of David Shaw
>>>> Sent: Friday, June 29, 2018 6:43 PM
>>>> To: Users of Asterisk app_rpt
>>>> Subject: Re: [App_rpt-users] iaxrpt
>>>>
>>>> Hey Mike the stanza is fine.
>>>>
>>>> [Nodes]
>>>> 48166 = radio at 127.0.0.1:4569/48166,NONE
>>>> This just tells Asterisk (ASL) where node 48166 is. The 127.0.0.0/8 is
>>>> used by the server. This is OK.
>>>>
>>>> This is what we know as of now:
>>>> ASL is setup and working to allow connection on port 4569. You have
>>>> iax2.conf configured to allow a user to login. I would say ASL is setup and
>>>> working.
>>>>
>>>> If your computer is on the same subnet as your ASL node.
>>>>
>>>> I would check:
>>>> Windows Firewall
>>>> Windows Anti-Virus
>>>>
>>>> Wireless access point turn off AP Isolation
>>>> https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_set
>>>> tings#AP_Isolation
>>>>
>>>> Router turn any network Isolation
>>>> https://wiki.dd-wrt.com/wiki/index.php/Guest_Network#Guest_A
>>>> ccess_to_a_Network_Device
>>>>
>>>>
>>>>
>>>> David
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Thanks, David
>>>>
>>>> "Laws that forbid the carrying of arms...disarm only those who are
>>>> neither inclined nor determined to commit crimes. Such laws make things
>>>> worse for the assaulted and better for the assailants; they serve rather to
>>>> encourage than prevent homicides, for an unarmed man may be attacked with
>>>> greater confidence than an armed one."
>>>> Thomas Jefferson
>>>>
>>>> On Fri, Jun 29, 2018 at 2:00 PM, Mike Besemer <mwbesemer at cox.net> wrote:
>>>> Here's what I've got so far.
>>>>
>>>> tracert reports 1     hop: 1     2ms     2ms    2ms     RaspberryPi
>>>>    192.168.x.x
>>>>
>>>> Android Phone connected to Verizon network:  Good connect via the
>>>> external IP
>>>> Android Phone in Airplane mode connected to my wireless network: No
>>>> connect
>>>> Windows Computer connected to my wireless network: No connect
>>>>
>>>> So, it seems to be an internal/external IP issue rather than an
>>>> Android/Windows issue - which is what I had originally thought.  That
>>>> should mean that the [stanza] in iaxrpt.conf and extensions.conf is correct
>>>> - at least for the android phone.  (The Android works on the external IP
>>>> but not the internal IP, and that proves the stanzas are ok.)
>>>>
>>>> Tracert is reporting one hop from the Windows machine to the Pi - so the
>>>> machines are seeing each other.
>>>>
>>>> Attached is a lousy photo of a netstat -pln run from the pi, but I don't
>>>> know what I'm looking at.
>>>>
>>>> Mike
>>>> WM4B
>>>>
>>>>
>>>>
>>>>
>>>> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
>>>> On Behalf Of David Shaw
>>>> Sent: Friday, June 29, 2018 10:19 AM
>>>> To: Users of Asterisk app_rpt
>>>> Subject: Re: [App_rpt-users] iaxrpt
>>>>
>>>> Most new routers won't allow you to exit the local network (LAN) and come
>>>> back in. This might happen if you use a domain name that is associated with
>>>> your public address. If you want to use your public domain name to access
>>>> your node from inside your LAN. You'll need to add a DNS entry to your
>>>> router. **See "Side Note" below
>>>>
>>>> By default IAX2 uses UDP port 4569 and the bind address is set to all
>>>> interfaces/addresses in the ASL OS (allstarlink.org). As for the
>>>> hamvoip.com settings, you should check with them.
>>>>
>>>> Are you using the hostname or IP address to access your node?
>>>> Like Mike stated, use xxx.xxx.xxx.xxx:4569 from your local (LAN) devices.
>>>>
>>>> Testing:
>>>>   From your windows based computer. Try tracert and the IPaddress of the
>>>> node.
>>>>
>>>> tracert 192.168.x.x
>>>>
>>>> 1  <1 ms   <1 ms   <1 ms 192.168.x.x
>>>>
>>>> There should be only one hope to your node if your windows computer in on
>>>> the same network.
>>>>
>>>> Side note:
>>>> I use dhcp on all my nodes on my LAN networks. I give them static address
>>>> via the DHCP server. I also change the hostname on the node. i.e. asl2060
>>>> This allows the router's internal DNS server to associate the hostname
>>>> and IP address for the ASL node. Some routers will allow you to add a
>>>> domain name.
>>>> Also there is no need to open TCP port forwarding on you router for IAX2
>>>> 4569.
>>>>
>>>> David
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Thanks, David
>>>>
>>>> "Laws that forbid the carrying of arms...disarm only those who are
>>>> neither inclined nor determined to commit crimes. Such laws make things
>>>> worse for the assaulted and better for the assailants; they serve rather to
>>>> encourage than prevent homicides, for an unarmed man may be attacked with
>>>> greater confidence than an armed one."
>>>> Thomas Jefferson
>>>>
>>>> On Fri, Jun 29, 2018 at 3:58 AM, <mwbesemer at cox.net> wrote:
>>>> No.  I've never seen reference to that.  I'm still in the initial phase
>>>> of setting up this node; have not messed with rpt.conf yet.
>>>>
>>>> Mike
>>>> WM4B
>>>>
>>>>
>>>> On Thu, Jun 28, 2018 at 11:11 PM, Bob Pyke wrote:
>>>> Did you add your local node address for each node in the rpt,conf [nodes]
>>>> stanza?
>>>> Thanks,
>>>> Bob
>>>> K6ECM
>>>> 73
>>>>
>>>> On Jun 28, 2018, at 6:12 PM, Mike <mm at midnighteng.com> wrote:
>>>>
>>>>
>>>> Mike,
>>>>
>>>> Still a lot of possibilities of things that may not be right but,
>>>>
>>>> Just so that you are conducting a 'good test' behind your nat through
>>>> wifi,
>>>>
>>>> put your phone in airplane mode, then turn just the wifi on and connect.
>>>>
>>>> You might also want to turn the forwarding to just the UDP 4569 and
>>>> specify that in your phone connect,
>>>>
>>>> guessing your using the android iaxrpt....  like this for your IP...
>>>>
>>>> 192.169.1.101:4569   < :port especially if not the norm, but do it
>>>> anyway.
>>>> That's a few things to investigate anyway,
>>>>
>>>> Let me know if your still having issues.
>>>>
>>>> Oh... don't forget to get back out of airplane mode / turn cellular back
>>>> on when done.
>>>>
>>>> Hate to see ya late for dinner ...lol
>>>> ...mike/kb8jnm
>>>> On 6/28/2018 8:00 PM, Mike Besemer wrote:
>>>> Making progress on my node.  After several false starts I finally got the
>>>> node connected and am able to connect via iaxrpt from my Android devices if
>>>> I use my EXTERNAL IP address.
>>>>
>>>> I cannot connect from Android or Windows using my INTERAL IP address. I
>>>> followed the guide at hamvoip.com and have double checked everything.
>>>>
>>>> The port is open for both UDP and TCP connections. The firewall seems ok.
>>>>
>>>> It has to be something obvious.  What             did I miss?
>>>>
>>>> Mike
>>>>
>>>> WM4B
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>> the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>> the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>>
>>>>        ------------------------------
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>> the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>> the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>> the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>>>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>> the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

More information about the App_rpt-users mailing list