[App_rpt-users] Random node assignments

[Skyler F]

First, Get the swap command so the node number has the right URI attached,
then perform a Write (w) function in your radio-tune-menu for BOTH nodes.
See if that helps.


On Wed, Mar 7, 2018 at 4:38 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:

> When it works, does the tune config file reflect what is seen in lsusb?
>
> Thanks,
> Bob
> k6ecm
> 73
> Sent from my iPhone
>
> > On Mar 7, 2018, at 2:02 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
> >
> > I've been running a 2 node URI Dial setup on a computer with no issues.
> Last night I installed a 3rd URI node and now every time I reboot asterisk
> it randomly assigns the node number to each radio/URI pair and it's never
> the same. I'm not using a USB hub but just the USB ports on the back of the
> computer and I have left things plugged into the same ports. I've tried
> swapping USB to node via radio-tune-menu which works until I reboot.
> Thoughts?
> >
> > John N2YP
> > --
> > Sent from my Android device with K-9 Mail. Please excuse my brevity.
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.




-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180308/1d0da97f/attachment.html>