[App_rpt-users] radio wont work

[David Waters]

 I think it is a conf file but i have no real manual, just notes that make very little sence.
    On Wednesday, March 14, 2018, 9:36:41 PM EDT, Mike <mike at midnighteng.com> wrote:  
 
  
I'm guessing again but think you do need to edit usbradio.config since that is what you are using.
 
I'm sorry that I can't be more precise as I'm still using a older release and don't want to advise you wrong.
 
It does not hurt to look at the manual and follow those instruction for the release you are using on how to set-up radiousb.
 
Perhaps someone else can chime in better than I. Since I use parallel port for logic on my nodes.
 
But it's not exactly clear to me what all you changed...radio...usb driver... URI
 
 
...mike/kb8jnm
 
 
 On 3/14/2018 9:13 PM, David Waters wrote:
  
 Without knowing the full grimy details,
I would say first check your logic for COS and PTT.

Take just a little time to think it through.
The logic you were using before may be different on the radio or the
URI. Or both.

If both the COS and PTT are reverse, you will never hear a thing
squelch open or not. You will never send anything either.


Try to set up a test with just the most basic options and no pl.

just my thoughts,
Not sure what you mean, sorry but i don't know much about this subject. However my original radio worked i just commented out simpleusb stuff to try new radio on usbradio. when it didn't i commented out usbradio stuff and uncommented simpleusb again. the original shoul have worked like before but it didn't it stuck in transmitt mode like the new one I tried.
 
  
 _______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
 
 _______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180315/592e7505/attachment.html>