[App_rpt-users] suggestions

[BILLY JOE MEANS]

I found away to use ECHOLINK in Direct mode over cell system 

BJ Means 

> On Mar 20, 2018, at 11:37 PM, ARS W5OMR <ars.w5omr at gmail.com> wrote:
> 
> I added another rule to the 2nd ip address, told it 4570, edited the files... I *think* it registered,  but no biggie... I was able to connect one to the other, so semi-success... but not getting a 'heart-beat' on the URIx, yet. 
> I am probably going to drop the ASL 1.01 image in favor of the RAT_RAC(sp?) image on the RPi3B. 
> 
> 
>> On Tue, Mar 20, 2018, 22:24 David KE6UPI <dshaw at ke6upi.com> wrote:
>> Sorry, You'll also need to change/edit server2 (4570) rpt.conf and iax.conf.
>> 
>> On your router port foward 4569 to server1 and 4570 to server2.
>> 
>> David
>> 
>> On Tue, Mar 20, 2018 at 7:58 PM, David KE6UPI <dshaw at ke6upi.com> wrote:
>>> Just login to allstarlink.org. 
>>> 
>>> Create two servers.
>>> 
>>> server1
>>> server2
>>> 
>>> Under Server > server1 > Network > UDP Port: 4569
>>> Under Server > server2 > Network > UDP Port: 4570
>>> 
>>> David
>>> 
>>>> On Tue, Mar 20, 2018 at 7:04 PM, ARS W5OMR <ars.w5omr at gmail.com> wrote:
>>>> oh, yeah.. I know where to do the editing... I think I'll just wait to
>>>> do the 'final touches' when I get the system to where it's going to
>>>> live.
>>>> 
>>>> Thanks for confirming my fears, guys.  I used the new ASL 1.01 image.
>>>> I think the install scripts need a bit of tweeking, yet, but Steve's
>>>> on the right track.
>>>> A little manual editing got most of the software working.  The rest of
>>>> it networking schtuph and, as I said... I'll just wait to get it where
>>>> it's going to get that working.
>>>> 
>>>> Appreciate it.
>>>> 
>>>> 73 = Best Regards,
>>>> -Geoff/W5OMR
>>>> 
>>>> 
>>>> On Tue, Mar 20, 2018 at 8:22 PM, Mark Johnston <markjohnston73 at gmail.com> wrote:
>>>> > Also want to update the iax.conf file and allstarlink portal site to the new
>>>> > Port...
>>>> >
>>>> > **** North West Hub Allstar Node 2295 ****
>>>> >
>>>> > "Got Root?"
>>>> >
>>>> > How many software engineers does it take to change a light bulb?
>>>> > None. It's a hardware problem.
>>>> >
>>>> > The best way to accelerate a computer running Windows is at 9.81 m/s².
>>>> >
>>>> > "I get paid to support Windows, I use Linux to get work done."
>>>> >
>>>> >
>>>> > On Tue, Mar 20, 2018 at 6:17 PM, ARS W5OMR <ars.w5omr at gmail.com> wrote:
>>>> >>
>>>> >> I'm working with 2 nodes, 2 separate machines, both currently on the
>>>> >> same network.
>>>> >> Both are set the same, using the port of 4569.  That's -got- to be a
>>>> >> bad thing...
>>>> >>
>>>> >> Can I just poke a hole in the firewall to, say... 4570 and forward it
>>>> >> to the ip of the 2nd node?
>>>> >> Is it -really- as simple as that, or... is there some sort of new
>>>> >> 'fresh' hell, I'm in for?
>>>> >>
>>>> >> --
>>>> >> 73 = Best Regards,
>>>> >> -Geoff/W5OMR
>>>> >> _______________________________________________
>>>> >> App_rpt-users mailing list
>>>> >> App_rpt-users at lists.allstarlink.org
>>>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> >>
>>>> >> To unsubscribe from this list please visit
>>>> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>> >> scroll down to the bottom of the page. Enter your email address and press
>>>> >> the "Unsubscribe or edit options button"
>>>> >> You do not need a password to unsubscribe, you can do it via email
>>>> >> confirmation. If you have trouble unsubscribing, please send a message to
>>>> >> the list detailing the problem.
>>>> >
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > App_rpt-users mailing list
>>>> > App_rpt-users at lists.allstarlink.org
>>>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> >
>>>> > To unsubscribe from this list please visit
>>>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>> > scroll down to the bottom of the page. Enter your email address and press
>>>> > the "Unsubscribe or edit options button"
>>>> > You do not need a password to unsubscribe, you can do it via email
>>>> > confirmation. If you have trouble unsubscribing, please send a message to
>>>> > the list detailing the problem.
>>>> 
>>>> 
>>>> 
>>>> --
>>>> Operating your AM rig without a scope is like driving our car at night
>>>> without headlights. (~K4KYV)
>>>> 
>>>> 73 = Best Regards,
>>>> -Geoff/W5OMR
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180321/00c3d6e0/attachment.html>