[App_rpt-users] Bash Shell

[Bryan D. Boyle]

On 3/20/2018 9:59 PM, Sam Nabkey wrote:
> !#/bin/bash
>
> LOCALNODE="2000"
> REMOTENODE="2001"
> /usr/sbin/asterisk -rx "rpt fun ${LOCALNODE} *3${REMOTENODE}"
>
> Should work?
Or, if you want to call a single script from multiple DTMF commands; for 
instance, a shell called connect.sh:

#! /bin/bash
/usr/sbin/asterisk -rx "rpt fun $1 *3$2#"

for instance, to connect, being called from the DTMF functions:

dtmf1=cmd,/etc/asterisk/scripts/connect.sh node1 node2
dtmf2=cmd,/etc/asterisk/scripts/connect.sh node1 node3

where dtmf1 = some valid dtmf sequence
node 1 = the node you're sending the command to
node2 = the target you want to connect to

etc.

You could get even fancier, though I haven't tried it, where you pass 
both the node numbers AND the command to the script:

#! /bin/bash
/usr/sbin/asterisk -rx "rpt fun $1 $2$3#"

in rpt.conf:
dtmf1=cmd,/etc/asterisk/scripts/command.sh node1 command node2

such that dtmf1 = some valid dtmf sequence
node1 = node you're sending the command to
command = the app_rpt command
node2 = the target

You won't break anything...so experimentation is fun...

Bryan
WB0YLE/W2FUV
Morrisville PA