[App_rpt-users] System-Wide nodes by country list
Tim Sawyer
tisawyer at gmail.com
Sat Mar 31 03:41:15 UTC 2018
Thanks, I'm glad you like it. That will become the official allstarlink.org
site once I get it finished. The Allstarlink admin team has been using the
temporary site to approve user and node requests for months now. I'm
gradually adding and improving functionality from the production
site. Everybody is welcome to use what is there.
On Thu, Mar 29, 2018 at 11:15 AM, Alberto Enrique Puig <
alberto_e_puig at hotmail.com> wrote:
> Thanks very much Tim Sawyer. Thanks very much Tim Sawyer. I had no
> knowledge that we had that tool available.
>
>
> 73, Alberto KP4AP
>
>
> ------------------------------
> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> on
> behalf of app_rpt-users-request at lists.allstarlink.org <
> app_rpt-users-request at lists.allstarlink.org>
> *Sent:* Thursday, March 29, 2018 12:00 PM
> *To:* app_rpt-users at lists.allstarlink.org
> *Subject:* App_rpt-users Digest, Vol 109, Issue 24
>
> Send App_rpt-users mailing list submissions to
> app_rpt-users at lists.allstarlink.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_
> rpt-users
> App_rpt-users Info Page - lists.allstarlink.org
> <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
> lists.allstarlink.org
> Your email address: Your name (optional): You may enter a privacy password
> below. This provides only mild security, but should prevent others from
> messing with ...
>
>
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at lists.allstarlink.org
>
> You can reach the person managing the list at
> app_rpt-users-owner at lists.allstarlink.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
> This site is dedicated to the memory of Jim Dixon WB6NIL
>
>
> Today's Topics:
>
> 1. Re: System-Wide nodes by country list (ARS W5OMR)
> 2. Ecgolibk timeout setting (ARS W5OMR)
> 3. Re: System-Wide nodes by country list (Tim Sawyer)
> 4. Connecting to other Nodes (kk4avi at yahoo.com)
> 5. Significant Problem with ASL (Michael Gurski)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 28 Mar 2018 16:00:34 +0000
> From: ARS W5OMR <ars.w5omr at gmail.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] System-Wide nodes by country list
> Message-ID:
> <CAOhDOk1gOe9-cN23XQv4hapj_aamNQMFuPxbg4bkxePE8jnRPg@
> mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Or... how about a list that is sortable by header info?
> Default is sort by node number, or click location to sort by there, or sort
> by frequency, as well, or callsign, even...
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180328/bc2c2611/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 28 Mar 2018 16:55:56 +0000
> From: ARS W5OMR <ars.w5omr at gmail.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: [App_rpt-users] Ecgolibk timeout setting
> Message-ID:
> <CAOhDOk1QDmp75f56pfdvRqTzzUBs8adiGEWcG+9u8y5vFtO=0Q at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> In echolink.conf is a line that sets the timeout setting for non-activity.
>
> I'm a hotshot driver and all over the country, at any given time.
>
> I'd like to disable the timer.
> Would a setting of 0 do that?
> Or, can I just comment that field out?
>
> Thanks.
> Geoff (aprs.fi/w5omr-14)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180328/e37db032/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 28 Mar 2018 16:41:44 -0700
> From: Tim Sawyer <tisawyer at gmail.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] System-Wide nodes by country list
> Message-ID:
> <CAG3ht9uPOe_vVoc9Sr-RdaK-2LHsZV5o2uLDv33xhvTSCOeSAw@
> mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> This list https://allstar.aargdmr.net/nodelist/ can be sorted or filtered
> by country.
>
> On Wed, Mar 28, 2018 at 7:15 AM, Alberto Enrique Puig <
> alberto_e_puig at hotmail.com> wrote:
>
> > For allstar system administrators
> >
> > Is there a possibility that a list of nodes of the entire system per
> > country can be added to the network server?
> >
> > Thanks!
> >
> > 73 Alberto KP4AP
> >
> >
> >
> > ------------------------------
> > *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> on
> > behalf of app_rpt-users-request at lists.allstarlink.org <
> > app_rpt-users-request at lists.allstarlink.org>
> > *Sent:* Saturday, March 24, 2018 12:00 PM
> > *To:* app_rpt-users at lists.allstarlink.org
> > *Subject:* App_rpt-users Digest, Vol 109, Issue 19
> >
> > Send App_rpt-users mailing list submissions to
> > app_rpt-users at lists.allstarlink.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_
> > rpt-users
> > App_rpt-users Info Page - lists.allstarlink.org
> > <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
> > lists.allstarlink.org
> > Your email address: Your name (optional): You may enter a privacy
> password
> > below. This provides only mild security, but should prevent others from
> > messing with ...
> >
> >
> > or, via email, send a message with subject or body 'help' to
> > app_rpt-users-request at lists.allstarlink.org
> >
> > You can reach the person managing the list at
> > app_rpt-users-owner at lists.allstarlink.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of App_rpt-users digest..."
> >
> > This site is dedicated to the memory of Jim Dixon WB6NIL
> >
> >
> > Today's Topics:
> >
> > 1. Re: Wireless issues on new install (Pierre Martel)
> > 2. Re: Announcing AllStarLink Asterisk version 1.01 (Greg Noneman)
> > 3. Re: Announcing AllStarLink Asterisk version 1.01 (Steve Zingman)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 23 Mar 2018 13:11:02 -0400
> > From: Pierre Martel <petem001 at gmail.com>
> > To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> > Subject: Re: [App_rpt-users] Wireless issues on new install
> > Message-ID:
> > <CAL8dJwrB_Zi9eF-+z7cu_xcBT8pjZMZvQzsAnYYDbGp8vqRZCA@
> > mail.gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > maybe drop the output of iptable rules here, we could see if it is
> related
> > to firewall???
> >
> > sudo iptables -L
> >
> >
> >
> > 2018-03-23 10:00 GMT-04:00 Steve Zingman <szingman at msgstor.com>:
> >
> > > It may be a firewall issue. I'll copy Nate on this.
> > >
> > > On 3/22/2018 3:53 PM, KB7YS-Stacey wrote:
> > >
> > > Final issue I will bring up for a while (I hope, but can't promise):
> > >
> > > On the Acer Aspire One I installed on I added the wlan adapter to the
> > > interfaces file:
> > >
> > > # wireless adapter with dhcp
> > > auto wlp2s0
> > > iface wlp2s0 inet dhcp
> > > wpa-ssid myssid
> > > wpa-key-mgmt WPA-PSK
> > > wpa-group TKIP CCMP
> > > wpa-psk mypasskey
> > >
> > > After doing this I ran across the script in the asl-menu for setting up
> > > wireless and ran it - it looked like it added info to the
> wpa.supplicant
> > (I
> > > verified it's all info was correct).
> > >
> > > Ok, so here is the issue - the wlan connects and gets proper addresses
> > and
> > > dns - I can ping anything and get responses, I can ssh to other systems
> > on
> > > my network, there seems to be no problem with bi-directional
> > communications
> > > *if* originated from the system. The same cannot be said for incoming -
> > no
> > > ping response, no ssh, apparently nothing connects when coming in.
> > >
> > > I don't think it's an issue with the adapter or driver, also it was
> > > working (after manually adding to interfaces) on the previous image. I
> am
> > > not sure where to start but hoping someone can help direct my focus and
> > > efforts.
> > >
> > > Thanks again!
> > > Stacey - KB7YS
> > >
> > >
> > > _______________________________________________
> > > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://
> > lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit
> http://lists.allstarlink.org/
> > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> > the page. Enter your email address and press the "Unsubscribe or edit
> > options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> > >
> > >
> > >
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit
> http://lists.allstarlink.org/
> > > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom
> of
> > > the page. Enter your email address and press the "Unsubscribe or edit
> > > options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > > confirmation. If you have trouble unsubscribing, please send a message
> to
> > > the list detailing the problem.
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> > attachments/20180323/6d0faaf2/attachment-0001.html>
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Fri, 23 Mar 2018 15:58:02 -0700
> > From: Greg Noneman <gregn1 at cox.net>
> > To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> > Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version
> > 1.01
> > Message-ID: <D3D4F8D0-53C2-4B32-A89C-95F939829ECB at icloud.com>
> > Content-Type: text/plain; charset=utf-8
> >
> > Steve,
> >
> > I have a question about the installation/update of AllStarLink Asterisk
> > version 1.01 that I don’t believe the ReadMe file addressed (pardon me
> if I
> > missed it). I have both Intel/AMD and RPi installations that are
> currently
> > running DIAL. Is there any simple/effective way to “automatically"
> upgrade
> > tp ASLA 1.01, or is it necessary to back up my config files, perform a
> new
> > clean install, and then restore my configs?
> >
> >
> > Thanks,
> > Greg
> > WB6ZSU
> >
> > > On Mar 18, 2018, at 3:08 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
> > >
> > > We are happy to announce AllStarLink Asterisk version 1.01. This
> > updated version contains a number of bug fixes and enhancements. The
> method
> > used for installing and upgrading AllStarLink Asterisk has been changed
> > from building from source code to simply install and upgrade the programs
> > that make up AllStarLink Asterisk. AllStarLink Asterisk is now using the
> > same update method any other Debian program has used for years. The
> package
> > management system is called APT (acronym for Advanced Package Tool). APT
> is
> > a set of tools for managing Debian packages, and therefore the
> applications
> > installed on your Debian system.
> > >
> > > The link on allstarlink.org and the wiki <wiki.allstarlink.org> Now
> > point to the new images for x86/AMD and Raspberry Pi.
> > >
> > > <http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/
> > ASL_1.01-20180228-amd64-i386-debian-stretch-netinst.zip>
> > > <http://dvswitch.org/files/ASL_Images/Raspberry_Pi/
> > Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip>
> > >
> > > The repository of AllStarLink Images is located at <
> > http://dvswitch.org/files/ASL_Images/>
> > >
> > > For a more complete explanation of the changes to AllStarLink Asterisk
> > see <http://dvswitch.org/files/ASL_Images/readme.txt>
> > >
> > > 73, Steve N4IRS
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit
> http://lists.allstarlink.org/
> > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> > the page. Enter your email address and press the "Unsubscribe or edit
> > options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Fri, 23 Mar 2018 19:02:58 -0400
> > From: Steve Zingman <szingman at msgstor.com>
> > To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>,
> > Greg Noneman <gregn1 at cox.net>
> > Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version
> > 1.01
> > Message-ID: <e34667ac-6413-0383-667a-ae1e28e6ea95 at msgstor.com>
> > Content-Type: text/plain; charset=utf-8; format=flowed
> >
> > Greg,
> > You are correct. You could try savenode bit it would be better if you
> > backed up /etc/asterisk/asterisk. This is the LAST time this will be
> > required. There are some minor differences in the config files but your
> > old files should work.
> >
> > Steve
> >
> > On 03/23/2018 06:58 PM, Greg Noneman wrote:
> > > Steve,
> > >
> > > I have a question about the installation/update of AllStarLink Asterisk
> > version 1.01 that I don’t believe the ReadMe file addressed (pardon me
> if I
> > missed it). I have both Intel/AMD and RPi installations that are
> currently
> > running DIAL. Is there any simple/effective way to “automatically"
> upgrade
> > tp ASLA 1.01, or is it necessary to back up my config files, perform a
> new
> > clean install, and then restore my configs?
> > >
> > >
> > > Thanks,
> > > Greg
> > > WB6ZSU
> > >
> > >> On Mar 18, 2018, at 3:08 PM, Steve Zingman <szingman at msgstor.com>
> > wrote:
> > >>
> > >> We are happy to announce AllStarLink Asterisk version 1.01. This
> > updated version contains a number of bug fixes and enhancements. The
> method
> > used for installing and upgrading AllStarLink Asterisk has been changed
> > from building from source code to simply install and upgrade the programs
> > that make up AllStarLink Asterisk. AllStarLink Asterisk is now using the
> > same update method any other Debian program has used for years. The
> package
> > management system is called APT (acronym for Advanced Package Tool). APT
> is
> > a set of tools for managing Debian packages, and therefore the
> applications
> > installed on your Debian system.
> > >>
> > >> The link on allstarlink.org and the wiki <wiki.allstarlink.org> Now
> > point to the new images for x86/AMD and Raspberry Pi.
> > >>
> > >> <http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/
> > ASL_1.01-20180228-amd64-i386-debian-stretch-netinst.zip>
> > >> <http://dvswitch.org/files/ASL_Images/Raspberry_Pi/
> > Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip>
> > >>
> > >> The repository of AllStarLink Images is located at <
> > http://dvswitch.org/files/ASL_Images/>
> > >>
> > >> For a more complete explanation of the changes to AllStarLink Asterisk
> > see <http://dvswitch.org/files/ASL_Images/readme.txt>
> > >>
> > >> 73, Steve N4IRS
> > >> _______________________________________________
> > >> App_rpt-users mailing list
> > >> App_rpt-users at lists.allstarlink.org
> > >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >>
> > >> To unsubscribe from this list please visit
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> > scroll down to the bottom of the page. Enter your email address and press
> > the "Unsubscribe or edit options button"
> > >> You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit
> http://lists.allstarlink.org/
> > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> > the page. Enter your email address and press the "Unsubscribe or edit
> > options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> >
> > ------------------------------
> >
> > End of App_rpt-users Digest, Vol 109, Issue 19
> > **********************************************
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> > the page. Enter your email address and press the "Unsubscribe or edit
> > options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
>
>
>
> --
> Tim WD6AWP
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180328/92741a2e/attachment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 28 Mar 2018 19:11:14 -0500
> From: <kk4avi at yahoo.com>
> To: <app_rpt-users at lists.allstarlink.org>
> Subject: [App_rpt-users] Connecting to other Nodes
> Message-ID: <004601d3c6f2$740ed230$5c2c7690$@yahoo.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Hello All;
>
> I’m having an issue configuring my mode. I’m using a Motorola Maxtrac
> radio with an USB-RIM 16 pin adapter connected to a raspberry pi with the
> ASL_1.01-20180228-armhf-raspbian-stretch-image.
>
> I have configured my setting into the software. I have tried to connect to
> other nodes but I’m unable to connect. Other nodes are able to connect to
> my node. When I do *70 on my node…it says “Node 47667 REPEAT ONLY”. Is this
> normal? Do I need to change something in my setup?
>
> The 16 pin connector on the Maxtrac is configure with pin 8 and 12 to
> PL/DPL CSQ Low. Does this need to be changed?
>
> Any help to help me change the configuration where I can connect to
> another node would be appreciated.
>
> KK4AVI
>
> -----Original Message-----
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org
> <app_rpt-users-bounces at lists.allstarlink.org>] On Behalf Of
> app_rpt-users-request at lists.allstarlink.org
> Sent: Friday, March 23, 2018 11:00 AM
> To: app_rpt-users at lists.allstarlink.org
> Subject: App_rpt-users Digest, Vol 109, Issue 18
>
> Send App_rpt-users mailing list submissions to
> app_rpt-users at lists.allstarlink.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_
> rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at lists.allstarlink.org
>
> You can reach the person managing the list at
> app_rpt-users-owner at lists.allstarlink.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of App_rpt-users digest..."
>
> This site is dedicated to the memory of Jim Dixon WB6NIL
>
>
> Today's Topics:
>
> 1. Connecting to other Nodes (kk4avi at yahoo.com)
> 2. Re: DIAL install on Virtual Box (Andy Madsen)
> 3. Re: DIAL install on Virtual Box (Jason Kendall)
> 4. Re: DIAL install on Virtual Box (Steve Zingman)
> 5. Re: DIAL install on Virtual Box (Jason Kendall)
> 6. Wireless issues on new install (KB7YS-Stacey)
> 7. Re: Wireless issues on new install (Steve Zingman)
> 8. Re: Connecting to other Nodes (Steve Zingman)
> 9. Re: Connecting to other Nodes (ARS W5OMR)
> 10. Re: Wireless issues on new install (Steve Zingman)
> 11. Re: Wireless issues on new install (Andy KB7B)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 22 Mar 2018 11:08:34 -0500
> From: <kk4avi at yahoo.com>
> To: <app_rpt-users at lists.allstarlink.org>
> Subject: [App_rpt-users] Connecting to other Nodes
> Message-ID: <002801d3c1f8$08139e70$183adb50$@yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hello,
>
>
>
> I'm trying to configure my node. It connect to AllStar and I can have
> other nodes connect to my node. I'm unable to connect to any nodes. When I
> do *70, it gives the node number and then says "REPEAT ONLY". I'm using a
> Motorola Maxtrac radio connected to a raspberry pi.
>
>
>
> Do I have something configured wrong?
>
>
>
> Robert
>
> KK4VI
>
> Alvaton, KY
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180322/9c6910f7/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 22 Mar 2018 18:17:00 +0100
> From: Andy Madsen <andy_kb7b at yahoo.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] DIAL install on Virtual Box
> Message-ID: <5C9323BE-E24D-44A4-A41B-9826D5F56B17 at yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Some time ago I thought I remember seeing a link for an ASL install on top
> of an existing Debian installation. Might that two step process (if it
> exists) work any better?
>
>
> -Andy
> PB7B/B7B
> 42432
>
> > On Mar 22, 2018, at 2:15 PM, Steve Zingman <szingman at msgstor.com> wrote:
> >
> > Stacey,
> > I used the "firmware-9.3.0-amd64-i386-netinst" as the base for the
> AllStarLink Install ISO.
> >
> > On 3/22/2018 2:35 AM, KB7YS-Stacey wrote:
> >> Still learning, but getting there...
> >>
> >> After no luck with getting a previous version of DIAL that was
> available on the ASL site to work with my fob interface, a suggestion led
> me to find there was a new version available. After installing and working
> though the asl-menu setup I finally had a working node with my old Acer
> Aspire One. However there were still some tasks to complete.
> >>
> >> While working through the Allmon2 install process I thought why not use
> Oracle Virtual Box to test on instead of the actual system. It was a good
> thought however the currently available image will not install on Virtual
> Box 5.2.8. Just for kicks I grabbed the current 32bit Debian iso - this
> installed on the virtual system with no issues. Anyone have any thoughts or
> ideas on why the DIAL image would not work. Error is 'no kernal' during the
> install... and it stops. I can continue, but then grub has nothing to load
> when the virtual reboots. Thank for any assistance.
> >>
> >> (PS - I did finally get Allmon2 installed and working, that was a bit
> >> of a bumpy ride, a good learning experience)
> >>
> >> Stacey - KB7YS
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at lists.allstarlink.org
> >> <mailto:App_rpt-users at lists.allstarlink.org
> <App_rpt-users at lists.allstarlink.org>>
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
> >>
> >> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180322/9f4dcf35/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 22 Mar 2018 14:33:03 -0400
> From: Jason Kendall <ve3yca at ve3yca.com>
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] DIAL install on Virtual Box
> Message-ID: <50651073-a331-730c-f4ec-8b819f1ac1f5 at ve3yca.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Hey all,
>
> Long time user, short time list subscriber.
>
> We over at VE3LSR has had a visualized DIAL for a while now. We've spent a
> fair amount of time getting as many things virtualized and/or inside docker
> containers where ever possible (You can find our published things on github
> and docker hub under the call sign).
>
> It started as a Debian install on ESXi with compiling dial on the box.
> We found that ESXi had some issues with the USB passthru required. It also
> didn't support some of the addon cards we were trying to use.
>
> We since moved it to a base Debian install, then adding the pre-built
> package repositories on top of Proxmox VM system. This left a bug we were
> chasing since we started down this rabbit hole. Turns out, the system is
> CPU sensitive. Meaning even though you don't have a lot of CPU usage, it's
> possible to have massive jitter if more then one process is trying to use a
> core at the same time. It's best to either limit the number of VMs on the
> box, or set some kind of CPU affinity to ensure the Debian Box always has
> access to a core. We've had no evidence of jitter since moving most of our
> other virtual machines onto a second box. Work investigation and tweaking
> is being done.
>
> Regards,
> Jason
> VE3YCA
>
>
>
> On 3/22/18 1:17 PM, Andy Madsen wrote:
> > Some time ago I thought I remember seeing a link for an ASL install on
> > top of an existing Debian installation. Might that two step process
> > (if it exists) work any better?
> >
> >
> > -Andy
> > PB7B/B7B
> > 42432
> >
> >> On Mar 22, 2018, at 2:15 PM, Steve Zingman <szingman at msgstor.com
> >> <mailto:szingman at msgstor.com <szingman at msgstor.com>>> wrote:
> >>
> >> Stacey,
> >> I used the "firmware-9.3.0-amd64-i386-netinst" as the base for the
> >> AllStarLink Install ISO.
> >>
> >> On 3/22/2018 2:35 AM, KB7YS-Stacey wrote:
> >>> Still learning, but getting there...
> >>>
> >>> After no luck with getting a previous version of DIAL that was
> >>> available on the ASL site to work with my fob interface, a
> >>> suggestion led me to find there was a new version available. After
> >>> installing and working though the asl-menu setup I finally had a
> >>> working node with my old Acer Aspire One. However there were still
> >>> some tasks to complete.
> >>>
> >>> While working through the Allmon2 install process I thought why not
> >>> use Oracle Virtual Box to test on instead of the actual system. It
> >>> was a good thought however the currently available image will not
> >>> install on Virtual Box 5.2.8. Just for kicks I grabbed the current
> >>> 32bit Debian iso - this installed on the virtual system with no
> >>> issues. Anyone have any thoughts or ideas on why the DIAL image
> >>> would not work. Error is 'no kernal' during the install... and it
> >>> stops. I can continue, but then grub has nothing to load when the
> >>> virtual reboots. Thank for any assistance.
> >>>
> >>> (PS - I did finally get Allmon2 installed and working, that was a
> >>> bit of a bumpy ride, a good learning experience)
> >>>
> >>> Stacey - KB7YS
> >>>
> >>>
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at lists.allstarlink.org
> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >>
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180322/9b237898/attachment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 22 Mar 2018 14:43:54 -0400
> From: Steve Zingman <szingman at msgstor.com>
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] DIAL install on Virtual Box
> Message-ID: <80a96497-da39-4fa4-b765-f51c9eb56438 at msgstor.com>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Jason,
> Thanks for the info. We do want to do some testing of AllStarLink Asterisk
> in a Docker env. Just to let you know a few things. We have retired DIAL.
> AllStarLink Asterisk v1.01 is built on Debian Stretch.
> There have been a number if enhancements and bug files applied. The
> install is via apt-get install rather then building from source. (Source
> will always be available at <https://github.com/AllStarLink/Asterisk>)
> This allows us to push out enhancements and upgrades quicker since it is
> now a simple apt-get upgrade. The Main page <allstarlink.org> and the
> wiki contain links to the i386/AMD installer. <allstarlink.org> and <
> wiki.allstarlink.org>
>
> 73, Steve N4IRS
>
> On 3/22/2018 2:33 PM, Jason Kendall wrote:
> >
> > Hey all,
> >
> > Long time user, short time list subscriber.
> >
> > We over at VE3LSR has had a visualized DIAL for a while now. We've
> > spent a fair amount of time getting as many things virtualized and/or
> > inside docker containers where ever possible (You can find our
> > published things on github and docker hub under the call sign).
> >
> > It started as a Debian install on ESXi with compiling dial on the box.
> > We found that ESXi had some issues with the USB passthru required. It
> > also didn't support some of the addon cards we were trying to use.
> >
> > We since moved it to a base Debian install, then adding the pre-built
> > package repositories on top of Proxmox VM system. This left a bug we
> > were chasing since we started down this rabbit hole. Turns out, the
> > system is CPU sensitive. Meaning even though you don't have a lot of
> > CPU usage, it's possible to have massive jitter if more then one
> > process is trying to use a core at the same time. It's best to either
> > limit the number of VMs on the box, or set some kind of CPU affinity
> > to ensure the Debian Box always has access to a core. We've had no
> > evidence of jitter since moving most of our other virtual machines
> > onto a second box. Work investigation and tweaking is being done.
> >
> > Regards,
> > Jason
> > VE3YCA
> >
> >
> >
> > On 3/22/18 1:17 PM, Andy Madsen wrote:
> >> Some time ago I thought I remember seeing a link for an ASL install
> >> on top of an existing Debian installation. Might that two step
> >> process (if it exists) work any better?
> >>
> >>
> >> -Andy
> >> PB7B/B7B
> >> 42432
> >>
> >>> On Mar 22, 2018, at 2:15 PM, Steve Zingman <szingman at msgstor.com
> >>> <mailto:szingman at msgstor.com <szingman at msgstor.com>>> wrote:
> >>>
> >>> Stacey,
> >>> I used the "firmware-9.3.0-amd64-i386-netinst" as the base for the
> >>> AllStarLink Install ISO.
> >>>
> >>> On 3/22/2018 2:35 AM, KB7YS-Stacey wrote:
> >>>> Still learning, but getting there...
> >>>>
> >>>> After no luck with getting a previous version of DIAL that was
> >>>> available on the ASL site to work with my fob interface, a
> >>>> suggestion led me to find there was a new version available. After
> >>>> installing and working though the asl-menu setup I finally had a
> >>>> working node with my old Acer Aspire One. However there were still
> >>>> some tasks to complete.
> >>>>
> >>>> While working through the Allmon2 install process I thought why not
> >>>> use Oracle Virtual Box to test on instead of the actual system. It
> >>>> was a good thought however the currently available image will not
> >>>> install on Virtual Box 5.2.8. Just for kicks I grabbed the current
> >>>> 32bit Debian iso - this installed on the virtual system with no
> >>>> issues. Anyone have any thoughts or ideas on why the DIAL image
> >>>> would not work. Error is 'no kernal' during the install... and it
> >>>> stops. I can continue, but then grub has nothing to load when the
> >>>> virtual reboots. Thank for any assistance.
> >>>>
> >>>> (PS - I did finally get Allmon2 installed and working, that was a
> >>>> bit of a bumpy ride, a good learning experience)
> >>>>
> >>>> Stacey - KB7YS
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at lists.allstarlink.org
> >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>
> >>>> To unsubscribe from this list please visithttp://lists.allstarlink.
> org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom
> of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> >>>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >>>
> >>
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at lists.allstarlink.org
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visithttp://lists.allstarlink.
> org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom
> of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> >> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180322/88cc7dc8/attachment-0001.html>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 22 Mar 2018 15:36:34 -0400
> From: Jason Kendall <ve3yca at ve3yca.com>
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] DIAL install on Virtual Box
> Message-ID: <028faa16-0ad2-4eb2-25b5-aa1e475a34f1 at ve3yca.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Thanks Steve,
>
> Sorry, probably bad words.
>
> Yeah, I started with the Dial build stack, then moved to the AllStarLink
> Asterisk (ASL*?) repositories once I found how to add the repos to base
> Debian. This is what's running on our repeater site now and works super
> well.
>
> As for docker, I can (and probably will) build Dockerfiles for the built
> out - it's simple enough. Where the problem comes in (which I realized much
> after our initial conversation about the idea months ago) is ensuring the
> DAHDI kernel driver is installed on the host for the correct kernel version.
>
> I'll probably start playing with this in the coming weeks.
>
> Cheers,
> J
>
>
> On 3/22/18 2:43 PM, Steve Zingman wrote:
> > Jason,
> > Thanks for the info. We do want to do some testing of AllStarLink
> > Asterisk in a Docker env. Just to let you know a few things. We have
> > retired DIAL. AllStarLink Asterisk v1.01 is built on Debian Stretch.
> > There have been a number if enhancements and bug files applied. The
> > install is via apt-get install rather then building from source.
> > (Source will always be available at
> > <https://github.com/AllStarLink/Asterisk>) This allows us to push out
> > enhancements and upgrades quicker since it is now a simple apt-get
> > upgrade. The Main page <allstarlink.org> and the wiki contain links to
> > the i386/AMD installer. <allstarlink.org> and <wiki.allstarlink.org>
> >
> > 73, Steve N4IRS
> >
> > On 3/22/2018 2:33 PM, Jason Kendall wrote:
> >>
> >> Hey all,
> >>
> >> Long time user, short time list subscriber.
> >>
> >> We over at VE3LSR has had a visualized DIAL for a while now. We've
> >> spent a fair amount of time getting as many things virtualized and/or
> >> inside docker containers where ever possible (You can find our
> >> published things on github and docker hub under the call sign).
> >>
> >> It started as a Debian install on ESXi with compiling dial on the
> >> box. We found that ESXi had some issues with the USB passthru
> >> required. It also didn't support some of the addon cards we were
> >> trying to use.
> >>
> >> We since moved it to a base Debian install, then adding the pre-built
> >> package repositories on top of Proxmox VM system. This left a bug we
> >> were chasing since we started down this rabbit hole. Turns out, the
> >> system is CPU sensitive. Meaning even though you don't have a lot of
> >> CPU usage, it's possible to have massive jitter if more then one
> >> process is trying to use a core at the same time. It's best to either
> >> limit the number of VMs on the box, or set some kind of CPU affinity
> >> to ensure the Debian Box always has access to a core. We've had no
> >> evidence of jitter since moving most of our other virtual machines
> >> onto a second box. Work investigation and tweaking is being done.
> >>
> >> Regards,
> >> Jason
> >> VE3YCA
> >>
> >>
> >>
> >> On 3/22/18 1:17 PM, Andy Madsen wrote:
> >>> Some time ago I thought I remember seeing a link for an ASL install
> >>> on top of an existing Debian installation. Might that two step
> >>> process (if it exists) work any better?
> >>>
> >>>
> >>> -Andy
> >>> PB7B/B7B
> >>> 42432
> >>>
> >>>> On Mar 22, 2018, at 2:15 PM, Steve Zingman <szingman at msgstor.com
> >>>> <mailto:szingman at msgstor.com <szingman at msgstor.com>>> wrote:
> >>>>
> >>>> Stacey,
> >>>> I used the "firmware-9.3.0-amd64-i386-netinst" as the base for the
> >>>> AllStarLink Install ISO.
> >>>>
> >>>> On 3/22/2018 2:35 AM, KB7YS-Stacey wrote:
> >>>>> Still learning, but getting there...
> >>>>>
> >>>>> After no luck with getting a previous version of DIAL that was
> >>>>> available on the ASL site to work with my fob interface, a
> >>>>> suggestion led me to find there was a new version available.
> >>>>> After installing and working though the asl-menu setup I finally
> >>>>> had a working node with my old Acer Aspire One. However there
> >>>>> were still some tasks to complete.
> >>>>>
> >>>>> While working through the Allmon2 install process I thought why
> >>>>> not use Oracle Virtual Box to test on instead of the actual
> >>>>> system. It was a good thought however the currently available
> >>>>> image will not install on Virtual Box 5.2.8. Just for kicks I
> >>>>> grabbed the current 32bit Debian iso - this installed on the
> >>>>> virtual system with no issues. Anyone have any thoughts or ideas
> >>>>> on why the DIAL image would not work. Error is 'no kernal' during
> >>>>> the install... and it stops. I can continue, but then grub has
> >>>>> nothing to load when the virtual reboots. Thank for any assistance.
> >>>>>
> >>>>> (PS - I did finally get Allmon2 installed and working, that was a
> >>>>> bit of a bumpy ride, a good learning experience)
> >>>>>
> >>>>> Stacey - KB7YS
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> App_rpt-users mailing list
> >>>>> App_rpt-users at lists.allstarlink.org
> >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-user
> >>>>> s
> >>>>>
> >>>>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >>>>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >>>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at lists.allstarlink.org
> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >>
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at lists.allstarlink.org
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180322/a412a404/attachment-0001.html>
>
> ------------------------------
>
> Message: 6
> Date: Thu, 22 Mar 2018 19:53:17 +0000 (UTC)
> From: KB7YS-Stacey <kb7ys_sk-asl at yahoo.com>
> To: "app_rpt-users at lists.allstarlink.org"
> <app_rpt-users at lists.allstarlink.org>
> Subject: [App_rpt-users] Wireless issues on new install
> Message-ID: <359918800.5498888.1521748397931 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Final issue I will bring up for a while (I hope, but can't promise):
> On the Acer Aspire One I installed on I added the wlan adapter to the
> interfaces file:
>
> # wireless adapter with dhcp
> auto wlp2s0
> iface wlp2s0 inet dhcp
> wpa-ssid myssid
> wpa-key-mgmt WPA-PSK
> wpa-group TKIP CCMP
> wpa-psk mypasskey
>
> After doing this I ran across the script in the asl-menu for setting up
> wireless and ran it - it looked like it added info to the wpa.supplicant (I
> verified it's all info was correct).
>
> Ok, so here is the issue - the wlan connects and gets proper addresses and
> dns - I can ping anything and get responses, I can ssh to other systems on
> my network, there seems to be no problem with bi-directional communications
> *if* originated from the system. The same cannot be said for incoming - no
> ping response, no ssh, apparently nothing connects when coming in.
>
> I don't think it's an issue with the adapter or driver, also it was
> working (after manually adding to interfaces) on the previous image. I am
> not sure where to start but hoping someone can help direct my focus and
> efforts.
> Thanks again!Stacey - KB7YS
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180322/cd0e273f/attachment-0001.html>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 23 Mar 2018 10:00:23 -0400
> From: Steve Zingman <szingman at msgstor.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>,
> KB7YS-Stacey <kb7ys_sk-asl at yahoo.com>
> Subject: Re: [App_rpt-users] Wireless issues on new install
> Message-ID: <8eb6ed32-60bd-eeaf-08f7-56c7bc4a8006 at msgstor.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> It may be a firewall issue. I'll copy Nate on this.
>
> On 3/22/2018 3:53 PM, KB7YS-Stacey wrote:
> > Final issue I will bring up for a while (I hope, but can't promise):
> >
> > On the Acer Aspire One I installed on I added the wlan adapter to the
> > interfaces file:
> >
> > # wireless adapter with dhcp
> > auto wlp2s0
> > iface wlp2s0 inet dhcp
> > wpa-ssid myssid
> > wpa-key-mgmt WPA-PSK
> > wpa-group TKIP CCMP
> > wpa-psk mypasskey
> >
> > After doing this I ran across the script in the asl-menu for setting
> > up wireless and ran it - it looked like it added info to the
> > wpa.supplicant (I verified it's all info was correct).
> >
> > Ok, so here is the issue - the wlan connects and gets proper addresses
> > and dns - I can ping anything and get responses, I can ssh to other
> > systems on my network, there seems to be no problem with
> > bi-directional communications *if* originated from the system. The
> > same cannot be said for incoming - no ping response, no ssh,
> > apparently nothing connects when coming in.
> >
> > I don't think it's an issue with the adapter or driver, also it was
> > working (after manually adding to interfaces) on the previous image. I
> > am not sure where to start but hoping someone can help direct my focus
> > and efforts.
> >
> > Thanks again!
> > Stacey - KB7YS
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180323/eace5e75/attachment-0001.html>
>
> ------------------------------
>
> Message: 8
> Date: Fri, 23 Mar 2018 10:01:59 -0400
> From: Steve Zingman <szingman at msgstor.com>
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] Connecting to other Nodes
> Message-ID: <5357e0ea-687e-a4a7-96fd-55e5bf083924 at msgstor.com>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Robert,
> What version of AllStarLink Asterisk are you running?
>
> 73, Steve N4IRS
>
> On 3/22/2018 12:08 PM, kk4avi at yahoo.com wrote:
> >
> > Hello,
> >
> > I’m trying to configure my node. It connect to AllStar and I can have
> > other nodes connect to my node. I’m unable to connect to any nodes.
> > When I do *70, it gives the node number and then says “REPEAT ONLY”.
> > I’m using a Motorola Maxtrac radio connected to a raspberry pi.
> >
> > Do I have something configured wrong?
> >
> > Robert
> >
> > KK4VI
> >
> > Alvaton, KY
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180323/3074545b/attachment-0001.html>
>
> ------------------------------
>
> Message: 9
> Date: Fri, 23 Mar 2018 14:05:42 +0000
> From: ARS W5OMR <ars.w5omr at gmail.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] Connecting to other Nodes
> Message-ID:
> <CAOhDOk2XRMM1yp=SjedX1hisfL8sovrhEG8xPJ3Xj43vkZQ7FA at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> That sounds like a firewall issue.
> Did you forward port 4569 to the up of your node?
>
> On Fri, Mar 23, 2018, 09:02 Steve Zingman <szingman at msgstor.com> wrote:
>
> > Robert,
> > What version of AllStarLink Asterisk are you running?
> >
> > 73, Steve N4IRS
> >
> > On 3/22/2018 12:08 PM, kk4avi at yahoo.com wrote:
> >
> > Hello,
> >
> >
> >
> > I’m trying to configure my node. It connect to AllStar and I can have
> > other nodes connect to my node. I’m unable to connect to any nodes.
> > When I do *70, it gives the node number and then says “REPEAT ONLY”.
> > I’m using a Motorola Maxtrac radio connected to a raspberry pi.
> >
> >
> >
> > Do I have something configured wrong?
> >
> >
> >
> > Robert
> >
> > KK4VI
> >
> > Alvaton, KY
> >
> >
> > _______________________________________________
> > App_rpt-users mailing
> > listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cg
> > i-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > and scroll down to the bottom of the page. Enter your email address
> > and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message
> > to the list detailing the problem.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180323/27a98fce/attachment-0001.html>
>
> ------------------------------
>
> Message: 10
> Date: Fri, 23 Mar 2018 10:06:40 -0400
> From: Steve Zingman <szingman at msgstor.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>,
> KB7YS-Stacey <kb7ys_sk-asl at yahoo.com>
> Subject: Re: [App_rpt-users] Wireless issues on new install
> Message-ID: <163a55d5-849c-c406-e038-90325d859519 at msgstor.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> Stacey,
> Please don't hesitate to bring up issues as you find them. The menu system
> is new. Nate, N8THN did one heck of a job with them. I'm sure there will be
> bugs and we will squash them throughout the system. That is one of the
> reasons we moved to a apt-get install method, to all faster bug fixes and
> easier for users it apply.
>
> 73, Steve N4IRS
>
> On 3/22/2018 3:53 PM, KB7YS-Stacey wrote:
> > Final issue I will bring up for a while (I hope, but can't promise):
> >
> > On the Acer Aspire One I installed on I added the wlan adapter to the
> > interfaces file:
> >
> > # wireless adapter with dhcp
> > auto wlp2s0
> > iface wlp2s0 inet dhcp
> > wpa-ssid myssid
> > wpa-key-mgmt WPA-PSK
> > wpa-group TKIP CCMP
> > wpa-psk mypasskey
> >
> > After doing this I ran across the script in the asl-menu for setting
> > up wireless and ran it - it looked like it added info to the
> > wpa.supplicant (I verified it's all info was correct).
> >
> > Ok, so here is the issue - the wlan connects and gets proper addresses
> > and dns - I can ping anything and get responses, I can ssh to other
> > systems on my network, there seems to be no problem with
> > bi-directional communications *if* originated from the system. The
> > same cannot be said for incoming - no ping response, no ssh,
> > apparently nothing connects when coming in.
> >
> > I don't think it's an issue with the adapter or driver, also it was
> > working (after manually adding to interfaces) on the previous image. I
> > am not sure where to start but hoping someone can help direct my focus
> > and efforts.
> >
> > Thanks again!
> > Stacey - KB7YS
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180323/59b4a7a6/attachment-0001.html>
>
> ------------------------------
>
> Message: 11
> Date: Fri, 23 Mar 2018 14:25:29 +0000 (UTC)
> From: Andy KB7B <andy_kb7b at yahoo.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] Wireless issues on new install
> Message-ID: <508663156.5928781.1521815129638 at mail.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Stacey,
> I have a similar problem on my LAN with a Technicolor CableModem.
> Internet connectivity works fine, but I can't always ping or SSH into
> other LAN WiFi devices.
> I ended up writing a cron script to reset WiFi if connectivity goes away.
>
> Never had this LAN issue with other WiFi modem/routers.
>
> -AndyPB7B/KB7B42432
>
> From: Steve Zingman <szingman at msgstor.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>;
> KB7YS-Stacey <kb7ys_sk-asl at yahoo.com>
> Sent: Friday, March 23, 2018 3:00 PM
> Subject: Re: [App_rpt-users] Wireless issues on new install
>
> It may be a firewall issue. I'll copy Nate on this.
>
> On 3/22/2018 3:53 PM, KB7YS-Stacey wrote:
>
> Final issue I will bring up for a while (I hope, but can't promise):
> On the Acer Aspire One I installed on I added the wlan adapter to the
> interfaces file:
>
> # wireless adapter with dhcp
> auto wlp2s0
> iface wlp2s0 inet dhcp
> wpa-ssid myssid
> wpa-key-mgmt WPA-PSK
> wpa-group TKIP CCMP
> wpa-psk mypasskey
>
> After doing this I ran across the script in the asl-menu for setting up
> wireless and ran it - it looked like it added info to the wpa.supplicant (I
> verified it's all info was correct).
>
> Ok, so here is the issue - the wlan connects and gets proper addresses
> and dns - I can ping anything and get responses, I can ssh to other systems
> on my network, there seems to be no problem with bi-directional
> communications *if* originated from the system. The same cannot be said for
> incoming - no ping response, no ssh, apparently nothing connects when
> coming in.
>
> I don't think it's an issue with the adapter or driver, also it was
> working (after manually adding to interfaces) on the previous image. I am
> not sure where to start but hoping someone can help direct my focus and
> efforts.
> Thanks again! Stacey - KB7YS
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180323/0ae7126b/attachment-0001.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> ------------------------------
>
> End of App_rpt-users Digest, Vol 109, Issue 18
> **********************************************
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Thu, 29 Mar 2018 07:11:52 +0000
> From: Michael Gurski <m.gurski at hotmail.com>
> To: "app_rpt-users at lists.allstarlink.org"
> <app_rpt-users at lists.allstarlink.org>
> Subject: [App_rpt-users] Significant Problem with ASL
> Message-ID:
> <MW2PR02MB3739A95992C731C9DE817DE99DA20 at MW2PR02MB3739.
> namprd02.prod.outlook.com>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Core 2 Duo 2.8GHz 6GB RAM 80GB HDD
>
>
> Previously ran with Centos 5 ACID. This box ran for 5 years, without
> issue.
>
>
> 1) MTR2000 UHF w/ URI 2) Remote Base CDM1250 VHF w/URI
>
>
> Upgraded to ASL from ACID
>
>
> ASL has been nothing but issues. First, what led me to the issues,
> COP,48 that we use for DTMF control, sounds "jittery" kind of like packet
> loss. But, it's local to a local transmitter. Second, linking two local
> nodes, on the same box, has significant "jittery symptoms", again, kind of
> like packet loss, on the same box. Third, linking to node 2560 Insomniac
> Net sounds like jittery mess.
>
>
> Jitter buffers are set exactly the same as they were on ACID. RPT.conf,
> same as ACID, extensions.conf same as ACID, usbradio.conf, same as ACID,
> you get the idea. Even to make sure, usb_tune file were still in check, I
> grabbed the service monitor and retuned usb_tune_XXX files. I am at a loss
> here.
>
>
> I have loaded 64 bit ASL first and then tried 32 bit ASL, no difference.
>
>
> Something is wrong. Anyone have the same symptoms?
>
>
> 73, Mike K0GUR
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/
> attachments/20180329/2b3909a9/attachment-0001.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> ------------------------------
>
> End of App_rpt-users Digest, Vol 109, Issue 24
> **********************************************
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
--
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180330/ef1c52ce/attachment.html>
More information about the App_rpt-users
mailing list