[App_rpt-users] ASL Time Fixed

[Mike]

Happens to most... LOL

And the only reason I am replying to the group to your message is

just to remind everyone that when you run into a newb in their initial 
set-up, make sure this is first on their list 'after' getting your local 
network config set-up. And it may be a good command line and file 
structure learning experience for some.

Plenty of tutorials on the web. I have wished we all were using UTC in 
our hardware clock and adjusted time zone in software clocks for a very 
long time now. Then everyone would be on the same page so to speak.

But as you build out other external functions, you might very well find 
that a improper time setting can create other problems.

Anyway, glad you got it straight.

...mike/kb8jnm


On 5/9/2018 9:38 AM, lengriff at optimum.net wrote:
> After installing ASL, I found the ' Time ' on my repeater to be incorrect.
> Turns out, the ' timezone ' was not set correctly.
> I restet it by using #dpkg-reconfigure tzdata, now all is fine.
>
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.