[App_rpt-users] ASL debian install script (not iso)

Fri May 18 23:29:47 UTC 2018

I'm experimenting with this at the moment. I found that I (appear) to be
missing dahdi-dkms. I just want to be able to connect to my hub, and
onwards from there to other nodes. If I can get a radio connection working
later, I'll do so...

I'm trying to get this to a point where I can run `vagrant up` or
`ansible-playbook site.yml` (depending on which makes more sense!)

--
Jon "The Nice Guy" Spriggs
G7VRI

On 18 May 2018 at 18:41, Steve Zingman <szingman at msgstor.com> wrote:

> Even if it was missing something, the deb packages SHOULD install
> everything that is needed. If it did not, I need to fix it. I can when I
> get a chance to run a install on vultr.com and see if I missed something.
>
>
> On 5/18/2018 1:36 PM, Mike wrote:
>
>> Well, while not investigating it further at this time,
>>
>> I was not sure how minimal the minimal Deb9 install that was at
>> A2-hosting, so,
>>
>> Without the Full Flavor offering....
>>
>> I did not know what I was missing, that might have been expected in the
>> scripting.
>>
>> Since I'm not a debian guy, at this point, I'll leave that to others for
>> now.
>>
>> I may come back to it later. I am fairly certain that the minimal install
>> was missing something needed.
>>
>> ...mike/kb8jnm
>>
>>
>> On 5/18/2018 11:47 AM, Steve Zingman wrote:
>>
>>> Actually, DAHDI is compiled using the kernel headers. Not actually part
>>> of the kernel but a loadable module.
>>>
>>> Steve N4IRS
>>>
>>> On 5/18/2018 7:24 AM, ARS W5OMR wrote:
>>>
>>>> If I'm not mistaken, I thought dahdi had to be compiled into the kernel.
>>>>
>>>>
>>>> On Thu, May 17, 2018 at 11:58 PM, Mike <mm at midnighteng.com> wrote:
>>>>
>>>>> Well,
>>>>>
>>>>> I did ask for it... LOL
>>>>>
>>>>> You never learn anything if everything goes well...
>>>>>
>>>>> Plenty of issues for me but I did retrace the steps to see where it was
>>>>> going wrong.
>>>>>
>>>>> Have to hit it some other time as I'm still learning the querky diffs
>>>>> on
>>>>> debian over centos
>>>>>
>>>>> so it takes me a bit to break down the scripts. But I think I may
>>>>> start anew
>>>>> just to see if it wasn't a fluke.
>>>>>
>>>>> But basically, the dahdi mods didn't install and probably could not be
>>>>> built
>>>>> from other stuff that did not load.
>>>>>
>>>>> But I can't see it in error logs. So, I will try fresh, again, fri ?
>>>>>
>>>>> ...mike/kb8jnm
>>>>>
>>>>>
>>>>>
>>>>> On 5/18/2018 12:09 AM, Mike Lee wrote:
>>>>>
>>>>>> The instructions Steve linked to on the FAQ worked flawlessly for me
>>>>>> on
>>>>>> Linode.
>>>>>>
>>>>>> Mike
>>>>>> K6MJU
>>>>>>
>>>>>>
>>>>>> On Thu, May 17, 2018 at 7:10 PM Steve Zingman <szingman at msgstor.com>
>>>>>> wrote:
>>>>>>
>>>>>> https://wiki.allstarlink.org/wiki/ASL_FAQ
>>>>>>> See question 4.
>>>>>>> On 05/17/2018 10:09 PM, Mike wrote:
>>>>>>>
>>>>>>>> So after my success loading ASL/stretch iso on vps,
>>>>>>>>
>>>>>>>> I want to use one other server where I can't load a iso on vps.
>>>>>>>>
>>>>>>>> But I was looking for the scripts to install on  a existing debian 9
>>>>>>>> install.
>>>>>>>>
>>>>>>>> Can anyone point me to the right direction for those ?
>>>>>>>>
>>>>>>>> Just experimenting...
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> ...mike/kb8jnm
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> App_rpt-users mailing list
>>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>>
>>>>>>>> To unsubscribe from this list please visit
>>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>> and scroll down to the bottom of the page. Enter your email address
>>>>>>>> and press the "Unsubscribe or edit options button"
>>>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>>>> confirmation. If you have trouble unsubscribing, please send a
>>>>>>>> message
>>>>>>>> to the list detailing the problem.
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>> To unsubscribe from this list please visit
>>>>>>>
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> and
>>>>>> scroll down to the bottom of the page. Enter your email address and
>>>>>> press
>>>>>> the "Unsubscribe or edit options button"
>>>>>>
>>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>>>
>>>>>> confirmation. If you have trouble unsubscribing, please send a
>>>>>> message to
>>>>>> the list detailing the problem.
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> and
>>>>>> scroll down to the bottom of the page. Enter your email address and
>>>>>> press
>>>>>> the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>> confirmation. If you have trouble unsubscribing, please send a
>>>>>> message to
>>>>>> the list detailing the problem.
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and
>>>>> scroll down to the bottom of the page. Enter your email address and
>>>>> press
>>>>> the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message
>>>>> to
>>>>> the list detailing the problem.
>>>>>
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/c
> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180519/18ddd5a8/attachment.html>