[App_rpt-users] RTL_SDR for receive

Tue May 22 17:40:08 UTC 2018

Are you trying to send RX audio to the simpleusb channel driver? You could
always "force" the RPT_RXKEYED variable by issuing rpt setvar nodenumber
RPT_RXKEYED=1 at the CLI to pipe audio through without having anything
connected. I've done this for testing purposes to assert COS and works as
intended. Not sure how you would be able to automate it however, maybe
something in cron at boot?

Just thinking out loud... I too am interested in the progress of this as
I've been wanting to mess with chan_alsa for a while, but never got started
with it.

73
Stephen
K1LNX

On Tue, May 22, 2018 at 1:27 PM, Steven Blackford <kb7sqi at gmail.com> wrote:

> Have you tried using the chan_usrp module?  It’s designed to work with GNU
> Radio.  I use it for bridging, but I’ve never tested it for this particular
> instance.  I’m reading with interest. 😊  73 de K4SQI!
>
>
>
> Steve, K4SQI
>
>
>
> *From: *KD2NFC, Joe Puma <kd2nfc at gmail.com>
> *Sent: *Tuesday, May 22, 2018 1:23 PM
> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> *Subject: *Re: [App_rpt-users] RTL_SDR for receive
>
>
>
> I’m using a image. Not 100% sure where I got it. Might be David’s. I can
> post the config. What do want to see?
>
>
>
> Yes the rtl_rm and aplay pipe will play on default sound device. The -D in
> aplay command portion of the command specifies your sound device.  Looks
> like the command I pasted had a double of the aplay command. It should
> read:
>
>
>
> rtl_fm  -M USB -f 446.160M -A fast -s 12K -p -0 -g 0.0 | aplay -r 12k -t
> raw
>
> -D default:CARD=Loopback -c 1 -f S16_LE
>
>
>
> I use to use this with wsjtx and the rtl-SDR for receive only and it piped
> the audio right into the program.
>
>
>
> The thing I need to accomplish is allow asterisk to use the usb fob for
> audio out and make use of the PTT and then allow input from another
> hardware device. I read that the only way to do it is using usbaudio driver
> for radio and adding a Alsa.conf file pointing to the input and output
> device you want to use.
>
>
>
> When I enable the chan_alsa.so and reboot, the radio keys up because the
> PTT is high from the usb audio activating but no audio comes from asterisk.
> It’s certainly not behaving the way should using when using chan_alsa.so by
> looking in the alsa.conf file and finding its audio in and out devices.
>
>
>
> Wondering how the usbaudio.so find it’s device. Does it assume the usb
> audio is card 0, or the default audio. What if you had two audio fobs on
> the system and you wanted to specify a specific one?
>
>
>
>
>
> TBC.....
>
>
>
>
>
> Joe
>
> Kd2nfc
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Sent from my iPad
>
>
> On May 22, 2018, at 3:44 AM, Bryan Fields <Bryan at bryanfields.net> wrote:
>
> On 5/22/18 3:29 AM, KD2NFC - Joe wrote:
>
> I was trying to use a rtl-sdr to pipe a receive signal into the input or
>
> receive audio for asterisk instead of using the mic in on the usb audio
> fob.
>
>
> I've always done this using a usbradio or simpleusb based input, never
> using
> the chan_alsa.  I don't believe alsa works for radio interfaces as there
> is no
> signaling for PTT/COR/PL/etc.
>
>
> Heres what I got so far. I can get a rtl-sdr installed in the Arch Linux by
>
> using pacman -s rtl-sdr.
>
>
> If you're running arch you compiled allstarlink from source, so can you
> post
> your config output?
>
>
> Then if you run this command, it will pipe a FM 12Khz bandwidth centered on
>
> 446.160 mhz and pipe it to the loopback device which is the device name of
>
> the loopback.
>
>
>
> rtl_fm  -M USB -f 446.160M -A fast -s 12K -p -0 -g 0.0 | aplay -r 12k -t
> raw
>
> -D default:CARD=Loopback -c 1 -f S16_LEaplay -r 12k -t raw -c 1 -f S16_LE
>
>
> Does this work if you just output to the local speakers?
>
>
> in modules.conf I enabled chan_alsa.so and after reboot with chan_alsa.so
>
> loaded I get no audio at all. My radio keys up at bootup but I get no
>
> initial greeting, no audio is coming through. Now I wasn't expecting this
> to
>
> work of the top, I still need to figure out how the node is going to get
> cos
>
> from the rtl-sdr, I could try to use ctcss but can anyone help me connect
>
> the dots on this with what I have so far.
>
>
> I don't think you'll have the signaling here to make this work.   You
> might be
> able to loop this into the DSP functions of USBradio, but it's going to
> need
> some code to glue it together.
>
> This sounds like a cool project, but GNUradio isn't the easiest to work
> with :)
>
> 73's
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180522/684ccc8e/attachment.html>