[App_rpt-users] RTL_SDR for receive

[KD2NFC - Joe]

Understood. I'll see where this takes me. 

Thank you Bryan!

Joe
Kd2nfc

-----Original Message-----
From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On Behalf Of Bryan Fields
Sent: May 24, 2018 12:53 AM
To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
Subject: Re: [App_rpt-users] RTL_SDR for receive

On 5/24/18 12:44 AM, KD2NFC - Joe wrote:
> Looks like there is support for alsa device and using gpio pins on a RPi.
> Why aren’t these features pushed out into builds and images?

I think the performance and audio quality was not good. Steve did some testing with it and I think the issue was you needed an interface device to limit/cleanup audio and it just wasn't worth it.

The code's there so it might be possible to improve it if you want to mess with it :)
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.