From larry at n7fm.com Thu Nov 1 04:24:14 2018 From: larry at n7fm.com (larry) Date: Wed, 31 Oct 2018 21:24:14 -0700 Subject: [App_rpt-users] GPIO for PTT and COS when using a generic sound FOB. Nano control. Will an update to V1.5 in mid 2017 In-Reply-To: <5907D3E93D774FDB918D4DEC98AA0476@Optiplex580PC> References: <5907D3E93D774FDB918D4DEC98AA0476@Optiplex580PC> Message-ID: An HTML attachment was scrubbed... URL: From waltcarter30 at yahoo.com Thu Nov 1 08:48:48 2018 From: waltcarter30 at yahoo.com (walter) Date: Thu, 1 Nov 2018 01:48:48 -0700 Subject: [App_rpt-users] GPIO for PTT and COS when using a generic sound FOB. Nano control. Will an update to V1.5 in mid 2017 In-Reply-To: References: <5907D3E93D774FDB918D4DEC98AA0476@Optiplex580PC> Message-ID: <01D9E0AF72AB4FC8BB8A7DD8CC80722D@Optiplex580PC> Thanks Larry. I was just wondering about it. I will just have to mod my sound fob. WB4LDS Walt From: larry Sent: Wednesday, October 31, 2018 9:24 PM To: app_rpt-users at lists.allstarlink.org Subject: Re: [App_rpt-users] GPIO for PTT and COS when using a generic sound FOB. Nano control. Will an update to V1.5 in mid 2017 Walter, Since no one else replied I will tell you what I know. I believe that was a project that was listed over on the Hamvoip group. At one time there was a proto type built and pictures posted on the Hamvoip Web site. There was even a schematic of the Nano and hardware that a bunch of folks built in anticipation of the project code being released. The code to use the hardware has never been published as far as I'm aware. At one point there was mention of a new I/O driver in the works that may work in lieu of that project but there hasn't been any news of that lately. I know the Nano project and write up has been removed from the Hamviop web page. So I would assume it will never become a reality. Too bad as many Allstar user would have really like that project to be a workable solution. Regards Larry - N7FM On 10/30/18 3:19 PM, walter wrote: Has this been done? It would make things better. GPIO for PTT and COS when using a generic sound FOB. Nano control. Will an update to V1.5 in mid 2017 Thanks Walt _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From n7ipb at wetnet.net Thu Nov 1 15:20:18 2018 From: n7ipb at wetnet.net (Ken Koster) Date: Thu, 01 Nov 2018 08:20:18 -0700 Subject: [App_rpt-users] GPIO for PTT and COS when using a generic sound FOB. Nano control. Will an update to V1.5 in mid 2017 In-Reply-To: References: <5907D3E93D774FDB918D4DEC98AA0476@Optiplex580PC> Message-ID: <23369209.DiTLnMrgL3@algedi> On Wednesday, October 31, 2018 9:24:14 PM PDT larry wrote: > Walter, > > Since no one else replied I will tell you what I know. > > I believe that was a project that was listed over on the Hamvoip > group. > At one time there was a proto type built and pictures posted on the > Hamvoip Web site. > There was even a schematic of the Nano and hardware that a bunch of > folks built in anticipation of the project code being released. > The code to use the hardware has never been published as far as I'm > aware. > > At one point there was mention of a new I/O driver in the works that > may work in lieu of that project but there hasn't been any news of > that lately. > > I know the Nano project and write up has been removed from the > Hamviop web page. So I would assume it will never become a reality. The last time I saw someone make a request for a gpio PTT driver on the Hamvoip list the response was something along the lines of 'why would you want to do that. we see no need'. > Too bad as many Allstar user would have really like that project to > be a workable solution. I'd love to have a gpio ptt driver since I have my own custom dual radio interface board that uses gpio's for PTT and COS. If efforts to build a package for raspian ever happen I'll look into adding support. In the past I've tried to build my own custom version but the online instructions had so many dependencies on Arch that I gave up for the time being. I gave up on Allstar and went with SvxLink which does have gpio support. I'm also reasonably certain the NWDigital guys would love support for their UDRC and DRAWS products since they use gpio's as well. -- Ken - N7IPB Email: n7ipb at wetnet.net JID: n7ipb at jabber.wetnet.net SvxLink Repeaters: http://pnw220.wetnet.net PGP Sig: F42B EF90 3CD3 31C7 3056 122E 993A 7B2E 5138 C42A ?Contrariwise,' continued Tweedledee, 'if it was so, it might be; and if it were so, it would be; but as it isn't, it ain't. That's logic.? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: This is a digitally signed message part. URL: From waltcarter30 at yahoo.com Fri Nov 2 01:53:05 2018 From: waltcarter30 at yahoo.com (walter) Date: Thu, 1 Nov 2018 18:53:05 -0700 Subject: [App_rpt-users] Welcome In-Reply-To: References: Message-ID: <7104793C010D40C8992D819E296BE839@Optiplex580PC> Hi Brett, Thanks,, I got my Pi today. Last night I downloaded and imaged my sd card. I plugged it in today and it came alive. I did the set up and after making changes on my router it started working. I don?t have my sound fob yet but I still connected to a local hub and am hearing the audio. I did have a lot of help from local hams that helped with some of the final set up. My internet service is not super fast but the audio is clean with no drop outs. The software was easy to set up. The group did a great job. Thanks Walt wb4lds From: Brett Friermood Sent: Wednesday, October 24, 2018 2:41 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] Welcome On Wed, Oct 24, 2018 at 4:01 PM walter wrote: I feel the same way. I have been reading the posts for the last week and feel reluctant to ask questions. I hope you guys get over this. I think I will wait a while before I request help. Walt WB4LDS Walter, and Steve, welcome to the world of AllStar Link. If you have questions on the use of Asterisk and app_rpt, don't hesitate to ask. There is a lot of technical experience available through this list and I have never seen anyone berated for asking questions and trying to learn. Just a small point, as with other forms of technical support a well written and information rich message will do more to help both you and those helping you than poorly laid out and written messages lacking detail. As for today's ongoing discussion you referenced, there is much more background than may be visible at face value. Most of the tension stems from a small group of developers who basically forked the project a while back and continue to maintain a closed source repository of their code. General consensus is that the GNU GPL v2 license, under which Asterisk is distributed, requires their code to be open-sourced, yet they have publicly refused to do so. A quick search of the internet will bring up many more discussions on that topic as well as claims of other questionable activities by those developers. As for some of the other replies to the thread, unfortunately this list is a reflection of the greater world of amateur radio, and similarly has the same broad spectrum of personalities. Brett KQ9N -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From marco.brunozzi at gmail.com Fri Nov 2 17:14:45 2018 From: marco.brunozzi at gmail.com (Marco Brunozzi) Date: Fri, 2 Nov 2018 18:14:45 +0100 Subject: [App_rpt-users] newbie... Message-ID: Hi everyone, this is iw0red I would like to convert our network from svxlink to simulcast/RTCM/allstarlink. I have some questions: 1) Could I use our cm108 card? (https://sites.google.com/view/iw0-red/usb-interface?authuser=0) 2) there is a guide for stupid like me? :-) 73 Marco IW0RED -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi --------------------------------------- From Bryan at bryanfields.net Fri Nov 2 17:55:51 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Fri, 2 Nov 2018 13:55:51 -0400 Subject: [App_rpt-users] Web Transceiver Message-ID: <80d262f1-4d2d-1cea-968e-3cab72f7b3c8@bryanfields.net> We have this back online now. Like to give a shout out to the web developers on the team for fixing this and our security team for their quick response to the DDOS attack. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From n7hqzjim at usermail.com Sat Nov 3 03:33:49 2018 From: n7hqzjim at usermail.com (n7hqzjim at usermail.com) Date: Fri, 2 Nov 2018 20:33:49 -0700 (PDT) Subject: [App_rpt-users] New callsign In-Reply-To: References: Message-ID: <1579136683.2174092.1541216029351.JavaMail.zimbra@usermail.com> Hello all. I have just updated my callsign from N7HQZ to W7AAH and my question is how do I update my allstarlink nodes to reflect this change? Thank you in advance. 73! Jim W7AAH ex N7HQZ --------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From tisawyer at gmail.com Sat Nov 3 14:26:32 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sat, 3 Nov 2018 07:26:32 -0700 Subject: [App_rpt-users] New callsign In-Reply-To: <1579136683.2174092.1541216029351.JavaMail.zimbra@usermail.com> References: <1579136683.2174092.1541216029351.JavaMail.zimbra@usermail.com> Message-ID: You'll need to change your call at two places. On you node computer and on the web. 1. On your node computer edit /etc/asterisk/rpt.conf with WinSCP (or your favorite editor). Depending on your distro you may have a menu to edit the conf files. In rpt.conf change the idrecording = |I line to your new call. 2. Login in to the new portal site https://web-tpa.allstarlink.org/portal/change-callsign.php and follow the prompts. On Fri, Nov 2, 2018 at 8:34 PM wrote: > Hello all. I have just updated my callsign from N7HQZ to W7AAH and my > question is how do I update my allstarlink nodes to reflect this change? > Thank you in advance. > > 73! Jim W7AAH ex N7HQZ > --------------------------------------- > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From jcarl.griffith at gmail.com Sun Nov 4 16:49:24 2018 From: jcarl.griffith at gmail.com (John Griffith) Date: Sun, 4 Nov 2018 09:49:24 -0700 Subject: [App_rpt-users] Question about recovering rpt.conf Message-ID: <000801d4745e$58724a60$0956df20$@gmail.com> I accidentally deleted my rpt.conf file (so easy to do with the slip of the mouse in WINSCP), but I have not refreshed my node or reloaded anything, therefore my node is still up and running normally. My question is, can I recover my rpt.conf file from the still working cache as my node is still online? John -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sun Nov 4 17:14:46 2018 From: mm at midnighteng.com (Mike) Date: Sun, 4 Nov 2018 12:14:46 -0500 Subject: [App_rpt-users] Question about recovering rpt.conf In-Reply-To: <000801d4745e$58724a60$0956df20$@gmail.com> References: <000801d4745e$58724a60$0956df20$@gmail.com> Message-ID: If you backed up your data to allstar server just download it. else: https://itsfoss.com/recover-deleted-files-linux/ back-up your files in /etc/asterisk to some other location/server. ...mike/kb8jnm On 11/4/2018 11:49 AM, John Griffith wrote: > I accidentally deleted my rpt.conf file (so easy to do with the slip of the > mouse in WINSCP), but I have not refreshed my node or reloaded anything, > therefore my node is still up and running normally. > My question is, can I recover my rpt.conf file from the still working cache > as my node is still online? > > John > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > From martin.boroff at gmail.com Sun Nov 4 17:15:56 2018 From: martin.boroff at gmail.com (Martin Boroff) Date: Sun, 4 Nov 2018 11:15:56 -0600 Subject: [App_rpt-users] Question about recovering rpt.conf In-Reply-To: <000801d4745e$58724a60$0956df20$@gmail.com> References: <000801d4745e$58724a60$0956df20$@gmail.com> Message-ID: See if you have testdisk on your Pi. Google ?Raspberry Pi I delete?. That app may recover it. Or if you have another pi you may be able to generate you system and then copy the new one and then edit it to your needs. 73, Marty WD9GYM Sent from my iPhone > On Nov 4, 2018, at 10:49 AM, John Griffith wrote: > > I accidentally deleted my rpt.conf file (so easy to do with the slip of the mouse in WINSCP), but I have not refreshed my node or reloaded anything, therefore my node is still up and running normally. > My question is, can I recover my rpt.conf file from the still working cache as my node is still online? > > John > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ars.w5omr at gmail.com Sun Nov 4 17:16:24 2018 From: ars.w5omr at gmail.com (ARS W5OMR) Date: Sun, 4 Nov 2018 11:16:24 -0600 Subject: [App_rpt-users] Question about recovering rpt.conf In-Reply-To: <000801d4745e$58724a60$0956df20$@gmail.com> References: <000801d4745e$58724a60$0956df20$@gmail.com> Message-ID: I hope this helps... https://itsfoss.com/recover-deleted-files-linux/ On Sun, Nov 4, 2018 at 10:49 AM John Griffith wrote: > I accidentally deleted my rpt.conf file (so easy to do with the slip of > the mouse in WINSCP), but I have not refreshed my node or reloaded > anything, therefore my node is still up and running normally. > > My question is, can I recover my rpt.conf file from the still working > cache as my node is still online? > > > > John > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV) 73 = Best Regards, -Geoff/W5OMR -------------- next part -------------- An HTML attachment was scrubbed... URL: From jcarl.griffith at gmail.com Sun Nov 4 19:46:15 2018 From: jcarl.griffith at gmail.com (John Griffith) Date: Sun, 4 Nov 2018 12:46:15 -0700 Subject: [App_rpt-users] Question about recovering rpt.conf In-Reply-To: References: <000801d4745e$58724a60$0956df20$@gmail.com> Message-ID: <001d01d47477$0d626730$28273590$@gmail.com> I?m told as soon as I write a new piece of software to the drive, I?m in danger of re-writing the data. I don?t have testdisk installed. I?m shutting down the Pi and pulling the card. I can run Testdisk on a PC with the card inserted, I hope. I suppose I can start from scratch with the rpt.conf again if I have to. What started this was, I did something I?m completely scratching my head on. I must have changed something or caused a typo in my original, real rpt.conf file that caused my URI green LED to stop flashing. Simple USB was simply not working any more. I spent a long time re-creating rpt.cof from the rpt.conf.sample file. After it was perfercted, I accidentally deleted it. I suppose I could copy my Original rpt.conf file here to see if any of you could spot the typo causing the URI to go dead. I won?t post unless someone offers to take a look. John From: App_rpt-users On Behalf Of ARS W5OMR Sent: Sunday, November 04, 2018 10:16 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Question about recovering rpt.conf I hope this helps... https://itsfoss.com/recover-deleted-files-linux/ On Sun, Nov 4, 2018 at 10:49 AM John Griffith > wrote: I accidentally deleted my rpt.conf file (so easy to do with the slip of the mouse in WINSCP), but I have not refreshed my node or reloaded anything, therefore my node is still up and running normally. My question is, can I recover my rpt.conf file from the still working cache as my node is still online? John _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV) 73 = Best Regards, -Geoff/W5OMR -------------- next part -------------- An HTML attachment was scrubbed... URL: From jcarl.griffith at gmail.com Sun Nov 4 20:23:16 2018 From: jcarl.griffith at gmail.com (John Griffith) Date: Sun, 4 Nov 2018 13:23:16 -0700 Subject: [App_rpt-users] Question about recovering rpt.conf In-Reply-To: References: <000801d4745e$58724a60$0956df20$@gmail.com> Message-ID: <000001d4747c$395956f0$ac0c04d0$@gmail.com> I found it. In my haste, I had also dragged the file to my Windows desktop. When I saw that temporary folder from WIN SCP appear, I tried to open it, but couldn?t. That?s when I went back in and accidentally deleted the file, but it was already there on my desktop. Thanks everyone for all the help. John From: App_rpt-users On Behalf Of ARS W5OMR Sent: Sunday, November 04, 2018 10:16 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Question about recovering rpt.conf I hope this helps... https://itsfoss.com/recover-deleted-files-linux/ On Sun, Nov 4, 2018 at 10:49 AM John Griffith > wrote: I accidentally deleted my rpt.conf file (so easy to do with the slip of the mouse in WINSCP), but I have not refreshed my node or reloaded anything, therefore my node is still up and running normally. My question is, can I recover my rpt.conf file from the still working cache as my node is still online? John _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Operating your AM rig without a scope is like driving our car at night without headlights. (~K4KYV) 73 = Best Regards, -Geoff/W5OMR -------------- next part -------------- An HTML attachment was scrubbed... URL: From 4L0ONY at gmx-topmail.de Tue Nov 6 09:53:46 2018 From: 4L0ONY at gmx-topmail.de (4L0ONY) Date: Tue, 6 Nov 2018 13:53:46 +0400 Subject: [App_rpt-users] problem configuring node Message-ID: Hello All! I am having trouble configuring the node. The Pi is running, has web connection and in generally functions. However, I think the problem lies somewhere in my RX audio. I am unable to configure this, as I dont seem to get a signal when trying to adjust it. Any help would be highly appreciated! Marco -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Wed Nov 7 20:26:58 2018 From: russell at kv4s.com (Russell Thomas) Date: Wed, 7 Nov 2018 14:26:58 -0600 Subject: [App_rpt-users] Connection issues with new ASL hub Message-ID: I'm working on a Raspberry Pi hub and it appeared to install everything fine and I went through the ASL quick setup wizard. The node is reporting it's online and such but when I try connecting to it from another node it tells me the connection failed or timed out. It seems like I had a similar issue with our club node and it's possibly a dahdi problem but I don't know how to fix it? Any suggestions? 73, Russell Thomas, KV4S -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Wed Nov 7 20:27:52 2018 From: russell at kv4s.com (Russell Thomas) Date: Wed, 7 Nov 2018 14:27:52 -0600 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: sorry the new node number is 49308 . On Wed, Nov 7, 2018 at 2:26 PM Russell Thomas wrote: > I'm working on a Raspberry Pi hub and it appeared to install everything > fine and I went through the ASL quick setup wizard. > > The node is reporting it's online and such but when I try connecting to it > from another node it tells me the connection failed or timed out. > > It seems like I had a similar issue with our club node and it's possibly a > dahdi problem but I don't know how to fix it? > > Any suggestions? > > 73, > Russell Thomas, KV4S > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Wed Nov 7 20:35:37 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Wed, 7 Nov 2018 15:35:37 -0500 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: I just had the same problem with my clubs ASL node and I am trying to remember how I fixed it....something to do with the Bind address in IAX.conf.....I had to set it to like 0.0.0.0 to bind on all IP's I think? Also check to make sure you have the right ports forwarded to the PI. On Wed, Nov 7, 2018 at 3:28 PM Russell Thomas wrote: > > sorry the new node number is 49308 > . > > On Wed, Nov 7, 2018 at 2:26 PM Russell Thomas wrote: > >> I'm working on a Raspberry Pi hub and it appeared to install everything >> fine and I went through the ASL quick setup wizard. >> >> The node is reporting it's online and such but when I try connecting to >> it from another node it tells me the connection failed or timed out. >> >> It seems like I had a similar issue with our club node and it's possibly >> a dahdi problem but I don't know how to fix it? >> >> Any suggestions? >> >> 73, >> Russell Thomas, KV4S >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From waltcarter30 at yahoo.com Wed Nov 7 20:36:26 2018 From: waltcarter30 at yahoo.com (walter) Date: Wed, 7 Nov 2018 13:36:26 -0700 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: <1F759346F2A045008AD1A0AF39FBAF20@Optiplex580PC> I had the same problem setting up my node. It turned out to be the port setting in the router. After I set it the node started working. Walt wb4lds From: Russell Thomas Sent: Wednesday, November 07, 2018 1:27 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Connection issues with new ASL hub sorry the new node number is 49308. On Wed, Nov 7, 2018 at 2:26 PM Russell Thomas wrote: I'm working on a Raspberry Pi hub and it appeared to install everything fine and I went through the ASL quick setup wizard. The node is reporting it's online and such but when I try connecting to it from another node it tells me the connection failed or timed out. It seems like I had a similar issue with our club node and it's possibly a dahdi problem but I don't know how to fix it? Any suggestions? 73, Russell Thomas, KV4S -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Bryan at bryanfields.net Wed Nov 7 20:41:20 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Wed, 7 Nov 2018 15:41:20 -0500 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: On 11/7/18 3:27 PM, Russell Thomas wrote: > sorry the new node number is 49308 > . Based on what I'm seeing: I see IAX respond on 4569 on 174.85.220.36 I see your node in the extnodes list 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 I am unable to connect to it. This implies you node is not downloading the extnodes file. check how new /var/lib/asterisk/rpt_extnodes is, and if it has anything in it. For two AllStar Nodes to connected, they must have reciprocal entries in their respective extnodes files. If one isn't updating, it's not going to allow the other to connect. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From k6ecm1 at gmail.com Wed Nov 7 20:52:50 2018 From: k6ecm1 at gmail.com (Bob Pyke) Date: Wed, 7 Nov 2018 12:52:50 -0800 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: I have a new ASL node on a Pi3. I can us iaxrpt to connect to other nodes, but it does not accept an external connection. Both the external and my new node are reporting external node list. I have not figured it out. It works when connected to another node. Oh, one more thing. The other node is on DIAL... not sure that should make a difference. Thanks, Bob K6ECM 73 > On Nov 7, 2018, at 12:41 PM, Bryan Fields wrote: > >> On 11/7/18 3:27 PM, Russell Thomas wrote: >> sorry the new node number is 49308 >> . > > Based on what I'm seeing: > > I see IAX respond on 4569 on 174.85.220.36 > > I see your node in the extnodes list > 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 > > I am unable to connect to it. > > This implies you node is not downloading the extnodes file. > check how new /var/lib/asterisk/rpt_extnodes is, and if it has anything in it. > > For two AllStar Nodes to connected, they must have reciprocal entries in their > respective extnodes files. If one isn't updating, it's not going to allow the > other to connect. > > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From Bryan at bryanfields.net Wed Nov 7 21:09:23 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Wed, 7 Nov 2018 16:09:23 -0500 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: On 11/7/18 3:52 PM, Bob Pyke wrote: > I have a new ASL node on a Pi3. I can us iaxrpt to connect to other nodes, > but it does not accept an external connection. Both the external and my new > node are reporting external node list. I have not figured it out. It works > when connected to another node. Ok, how is your node connected? Is there a NAT device in the way between your node and 174.85.220.36? You will need for forward UDP 4569 from 174.85.220.36 to what ever the NAT'd IP is if that's the case. But I really think the issue is your nodes list, I've checked and I do see 174.85.220.36 pulling the extnodes file every 3 or 4 minutes. > Oh, one more thing. The other node is on DIAL... not sure that should make > a difference. It shouldn't. There is little difference between the underlying protocols of AllStar, There are still Limey Linux based nodes on the network from 2004 working. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From k6ecm1 at gmail.com Wed Nov 7 21:24:00 2018 From: k6ecm1 at gmail.com (Bob Pyke) Date: Wed, 7 Nov 2018 13:24:00 -0800 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: <0D50D378-BC4C-49F1-B180-66B566427D2E@gmail.com> Bryan, There are two folks with the same issue. I?m the second (node 27287) Thanks, Bob K6ECM 73 > On Nov 7, 2018, at 1:09 PM, Bryan Fields wrote: > >> On 11/7/18 3:52 PM, Bob Pyke wrote: >> I have a new ASL node on a Pi3. I can us iaxrpt to connect to other nodes, >> but it does not accept an external connection. Both the external and my new >> node are reporting external node list. I have not figured it out. It works >> when connected to another node. > > Ok, how is your node connected? Is there a NAT device in the way between your > node and 174.85.220.36? > > You will need for forward UDP 4569 from 174.85.220.36 to what ever the NAT'd > IP is if that's the case. > > But I really think the issue is your nodes list, I've checked and I do see > 174.85.220.36 pulling the extnodes file every 3 or 4 minutes. > >> Oh, one more thing. The other node is on DIAL... not sure that should make >> a difference. > > It shouldn't. There is little difference between the underlying protocols of > AllStar, There are still Limey Linux based nodes on the network from 2004 > working. > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From Bryan at bryanfields.net Wed Nov 7 21:24:43 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Wed, 7 Nov 2018 16:24:43 -0500 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: On 11/7/18 4:09 PM, Bryan Fields wrote: > Ok, how is your node connected? Is there a NAT device in the way between your > node and 174.85.220.36? eureka! NAT bs is present :( root at Itchy:~# grep 174.85.220.36 /var/lib/asterisk/rpt_extnodes 47923=radio at 174.85.220.36:4569/47923,174.85.220.36 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 They a passing from different ports for IAX on the registration servers as well. You have two nodes behind the same IP, and they are identifying on the same port, so the NAT device at 174.85.220.36 won't be able to direct them to the proper internal address if they are not on different ports. What I would do is configure a nat rule to forward udp 174.85.220.36:4570 to :4569 and configure the port for the server 49308 is on to 4570 in the portal. This way when people connect to 47923, it goes to 174.85.220.36:4569 and 49308 will go to 174.85.220.36:4570. If you want 47923 and 49308 you'll need to configure them in rpt.conf, since they will be behind your NAT device, and using direct connections. [nodes] 49308 = radio@:4569/49308,NONE Give this a try and report back. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From shawpbx at gmail.com Wed Nov 7 23:16:56 2018 From: shawpbx at gmail.com (David Shaw) Date: Wed, 7 Nov 2018 15:16:56 -0800 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: Check out of document https://docs.google.com/document/d/1Dz0zD12RJKeFkmfuDM9fhQj88C84JeygfLygR8VniFI/edit?usp=sharing -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Wed, Nov 7, 2018 at 1:24 PM Bryan Fields wrote: > On 11/7/18 4:09 PM, Bryan Fields wrote: > > Ok, how is your node connected? Is there a NAT device in the way > between your > > node and 174.85.220.36? > > eureka! NAT bs is present :( > > root at Itchy:~# grep 174.85.220.36 /var/lib/asterisk/rpt_extnodes > 47923=radio at 174.85.220.36:4569/47923,174.85.220.36 > 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 > > They a passing from different ports for IAX on the registration servers as > well. > > You have two nodes behind the same IP, and they are identifying on the same > port, so the NAT device at 174.85.220.36 won't be able to direct them to > the > proper internal address if they are not on different ports. > > What I would do is configure a nat rule to forward udp 174.85.220.36:4570 > to > :4569 and configure the port for the server 49308 is on > to > 4570 in the portal. > > This way when people connect to 47923, it goes to 174.85.220.36:4569 and > 49308 > will go to 174.85.220.36:4570. > > If you want 47923 and 49308 you'll need to configure them in rpt.conf, > since > they will be behind your NAT device, and using direct connections. > > [nodes] > 49308 = radio@:4569/49308,NONE > > Give this a try and report back. > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Thu Nov 8 00:45:32 2018 From: russell at kv4s.com (Russell Thomas) Date: Wed, 7 Nov 2018 18:45:32 -0600 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: Thanks all! I think NAT is the problem as well. I'll work on it next time I'm by the computer! Many thanks! On Wed, Nov 7, 2018, 5:17 PM David Shaw Check out of document > > > https://docs.google.com/document/d/1Dz0zD12RJKeFkmfuDM9fhQj88C84JeygfLygR8VniFI/edit?usp=sharing > > > -- > Thanks, David > > "Laws that forbid the carrying of arms...disarm only those who are neither > inclined nor determined to commit crimes. Such laws make things worse for > the assaulted and better for the assailants; they serve rather to encourage > than prevent homicides, for an unarmed man may be attacked with greater > confidence than an armed one." > Thomas Jefferson > > > On Wed, Nov 7, 2018 at 1:24 PM Bryan Fields wrote: > >> On 11/7/18 4:09 PM, Bryan Fields wrote: >> > Ok, how is your node connected? Is there a NAT device in the way >> between your >> > node and 174.85.220.36? >> >> eureka! NAT bs is present :( >> >> root at Itchy:~# grep 174.85.220.36 /var/lib/asterisk/rpt_extnodes >> 47923=radio at 174.85.220.36:4569/47923,174.85.220.36 >> 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 >> >> They a passing from different ports for IAX on the registration servers >> as well. >> >> You have two nodes behind the same IP, and they are identifying on the >> same >> port, so the NAT device at 174.85.220.36 won't be able to direct them to >> the >> proper internal address if they are not on different ports. >> >> What I would do is configure a nat rule to forward udp 174.85.220.36:4570 >> to >> :4569 and configure the port for the server 49308 is >> on to >> 4570 in the portal. >> >> This way when people connect to 47923, it goes to 174.85.220.36:4569 and >> 49308 >> will go to 174.85.220.36:4570. >> >> If you want 47923 and 49308 you'll need to configure them in rpt.conf, >> since >> they will be behind your NAT device, and using direct connections. >> >> [nodes] >> 49308 = radio@:4569/49308,NONE >> >> Give this a try and report back. >> >> -- >> Bryan Fields >> >> 727-409-1194 - Voice >> http://bryanfields.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From waltcarter30 at yahoo.com Thu Nov 8 07:15:17 2018 From: waltcarter30 at yahoo.com (walter) Date: Thu, 8 Nov 2018 00:15:17 -0700 Subject: [App_rpt-users] New node on the air. Message-ID: Today node 49289 was finished and put on the air. The Pi3b+ and the software started up great. I do not know very much about linux, but I did not need to. The software stepped me through the setup just fine. I did have some help from the guys up in Phoenix area as to the router setup. I built my URI out of a mini sound fob. It had the cm119 chip not the cm108, but they convert the same way. I plugged it into my Maxtrac and all I had to do was set audio levels. I am very happy the way the project came together. Many thanks to the software writers. Great Job.... Walt 49289 WB4LDS -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Fri Nov 9 02:21:01 2018 From: russell at kv4s.com (Russell Thomas) Date: Thu, 8 Nov 2018 20:21:01 -0600 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: per the instructions, I did not create this node on a separate server on Allstar Link. can it be moved or have it deleted and start over? On Wed, Nov 7, 2018 at 6:45 PM Russell Thomas wrote: > Thanks all! > I think NAT is the problem as well. I'll work on it next time I'm by the > computer! > > Many thanks! > > On Wed, Nov 7, 2018, 5:17 PM David Shaw >> Check out of document >> >> >> https://docs.google.com/document/d/1Dz0zD12RJKeFkmfuDM9fhQj88C84JeygfLygR8VniFI/edit?usp=sharing >> >> >> -- >> Thanks, David >> >> "Laws that forbid the carrying of arms...disarm only those who are >> neither inclined nor determined to commit crimes. Such laws make things >> worse for the assaulted and better for the assailants; they serve rather to >> encourage than prevent homicides, for an unarmed man may be attacked with >> greater confidence than an armed one." >> Thomas Jefferson >> >> >> On Wed, Nov 7, 2018 at 1:24 PM Bryan Fields >> wrote: >> >>> On 11/7/18 4:09 PM, Bryan Fields wrote: >>> > Ok, how is your node connected? Is there a NAT device in the way >>> between your >>> > node and 174.85.220.36? >>> >>> eureka! NAT bs is present :( >>> >>> root at Itchy:~# grep 174.85.220.36 /var/lib/asterisk/rpt_extnodes >>> 47923=radio at 174.85.220.36:4569/47923,174.85.220.36 >>> 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 >>> >>> They a passing from different ports for IAX on the registration servers >>> as well. >>> >>> You have two nodes behind the same IP, and they are identifying on the >>> same >>> port, so the NAT device at 174.85.220.36 won't be able to direct them to >>> the >>> proper internal address if they are not on different ports. >>> >>> What I would do is configure a nat rule to forward udp >>> 174.85.220.36:4570 to >>> :4569 and configure the port for the server 49308 is >>> on to >>> 4570 in the portal. >>> >>> This way when people connect to 47923, it goes to 174.85.220.36:4569 >>> and 49308 >>> will go to 174.85.220.36:4570. >>> >>> If you want 47923 and 49308 you'll need to configure them in rpt.conf, >>> since >>> they will be behind your NAT device, and using direct connections. >>> >>> [nodes] >>> 49308 = radio@:4569/49308,NONE >>> >>> Give this a try and report back. >>> >>> -- >>> Bryan Fields >>> >>> 727-409-1194 - Voice >>> http://bryanfields.net >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From k6ecm1 at gmail.com Fri Nov 9 02:31:12 2018 From: k6ecm1 at gmail.com (Bob Pyke) Date: Thu, 8 Nov 2018 18:31:12 -0800 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: References: Message-ID: <061E73CE-A748-4949-ADF7-AFC5FE506BD4@gmail.com> Yes Thanks, Bob K6ECM 73 > On Nov 8, 2018, at 6:21 PM, Russell Thomas wrote: > > per the instructions, I did not create this node on a separate server on Allstar Link. can it be moved or have it deleted and start over? > > >> On Wed, Nov 7, 2018 at 6:45 PM Russell Thomas wrote: >> Thanks all! >> I think NAT is the problem as well. I'll work on it next time I'm by the computer! >> >> Many thanks! >> >>> On Wed, Nov 7, 2018, 5:17 PM David Shaw >> Check out of document >>> >>> https://docs.google.com/document/d/1Dz0zD12RJKeFkmfuDM9fhQj88C84JeygfLygR8VniFI/edit?usp=sharing >>> >>> >>> -- >>> Thanks, David >>> >>> "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." >>> Thomas Jefferson >>> >>> >>>> On Wed, Nov 7, 2018 at 1:24 PM Bryan Fields wrote: >>>> On 11/7/18 4:09 PM, Bryan Fields wrote: >>>> > Ok, how is your node connected? Is there a NAT device in the way between your >>>> > node and 174.85.220.36? >>>> >>>> eureka! NAT bs is present :( >>>> >>>> root at Itchy:~# grep 174.85.220.36 /var/lib/asterisk/rpt_extnodes >>>> 47923=radio at 174.85.220.36:4569/47923,174.85.220.36 >>>> 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 >>>> >>>> They a passing from different ports for IAX on the registration servers as well. >>>> >>>> You have two nodes behind the same IP, and they are identifying on the same >>>> port, so the NAT device at 174.85.220.36 won't be able to direct them to the >>>> proper internal address if they are not on different ports. >>>> >>>> What I would do is configure a nat rule to forward udp 174.85.220.36:4570 to >>>> :4569 and configure the port for the server 49308 is on to >>>> 4570 in the portal. >>>> >>>> This way when people connect to 47923, it goes to 174.85.220.36:4569 and 49308 >>>> will go to 174.85.220.36:4570. >>>> >>>> If you want 47923 and 49308 you'll need to configure them in rpt.conf, since >>>> they will be behind your NAT device, and using direct connections. >>>> >>>> [nodes] >>>> 49308 = radio@:4569/49308,NONE >>>> >>>> Give this a try and report back. >>>> >>>> -- >>>> Bryan Fields >>>> >>>> 727-409-1194 - Voice >>>> http://bryanfields.net >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users at lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Fri Nov 9 16:03:39 2018 From: russell at kv4s.com (Russell Thomas) Date: Fri, 9 Nov 2018 10:03:39 -0600 Subject: [App_rpt-users] Connection issues with new ASL hub In-Reply-To: <061E73CE-A748-4949-ADF7-AFC5FE506BD4@gmail.com> References: <061E73CE-A748-4949-ADF7-AFC5FE506BD4@gmail.com> Message-ID: Got it!! Thanks everyone!! On Thu, Nov 8, 2018 at 8:31 PM Bob Pyke wrote: > Yes > > Thanks, > Bob > K6ECM > 73 > > > On Nov 8, 2018, at 6:21 PM, Russell Thomas wrote: > > per the instructions, I did not create this node on a separate server on > Allstar Link. can it be moved or have it deleted and start over? > > > On Wed, Nov 7, 2018 at 6:45 PM Russell Thomas wrote: > >> Thanks all! >> I think NAT is the problem as well. I'll work on it next time I'm by the >> computer! >> >> Many thanks! >> >> On Wed, Nov 7, 2018, 5:17 PM David Shaw > >>> Check out of document >>> >>> >>> https://docs.google.com/document/d/1Dz0zD12RJKeFkmfuDM9fhQj88C84JeygfLygR8VniFI/edit?usp=sharing >>> >>> >>> -- >>> Thanks, David >>> >>> "Laws that forbid the carrying of arms...disarm only those who are >>> neither inclined nor determined to commit crimes. Such laws make things >>> worse for the assaulted and better for the assailants; they serve rather to >>> encourage than prevent homicides, for an unarmed man may be attacked with >>> greater confidence than an armed one." >>> Thomas Jefferson >>> >>> >>> On Wed, Nov 7, 2018 at 1:24 PM Bryan Fields >>> wrote: >>> >>>> On 11/7/18 4:09 PM, Bryan Fields wrote: >>>> > Ok, how is your node connected? Is there a NAT device in the way >>>> between your >>>> > node and 174.85.220.36? >>>> >>>> eureka! NAT bs is present :( >>>> >>>> root at Itchy:~# grep 174.85.220.36 /var/lib/asterisk/rpt_extnodes >>>> 47923=radio at 174.85.220.36:4569/47923,174.85.220.36 >>>> 49308=radio at 174.85.220.36:4569/49308,174.85.220.36 >>>> >>>> They a passing from different ports for IAX on the registration servers >>>> as well. >>>> >>>> You have two nodes behind the same IP, and they are identifying on the >>>> same >>>> port, so the NAT device at 174.85.220.36 won't be able to direct them >>>> to the >>>> proper internal address if they are not on different ports. >>>> >>>> What I would do is configure a nat rule to forward udp >>>> 174.85.220.36:4570 to >>>> :4569 and configure the port for the server 49308 is >>>> on to >>>> 4570 in the portal. >>>> >>>> This way when people connect to 47923, it goes to 174.85.220.36:4569 >>>> and 49308 >>>> will go to 174.85.220.36:4570. >>>> >>>> If you want 47923 and 49308 you'll need to configure them in rpt.conf, >>>> since >>>> they will be behind your NAT device, and using direct connections. >>>> >>>> [nodes] >>>> 49308 = radio@:4569/49308,NONE >>>> >>>> Give this a try and report back. >>>> >>>> -- >>>> Bryan Fields >>>> >>>> 727-409-1194 - Voice >>>> http://bryanfields.net >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users at lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> and scroll down to the bottom of the page. Enter your email address and >>>> press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email >>>> confirmation. If you have trouble unsubscribing, please send a message to >>>> the list detailing the problem. >>>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From steve.n7tx at gmail.com Fri Nov 9 19:22:38 2018 From: steve.n7tx at gmail.com (Steve Thompson) Date: Fri, 9 Nov 2018 12:22:38 -0700 Subject: [App_rpt-users] Allstar node Scheduler Help Message-ID: I?ve recently created a new Allstar node, and I?m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there?s a CW message telling me it?s a timeout. Then the node unkeys. Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out. I?ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf. In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they?d not be running .. unless there?s something somewhere else triggering this behavior. Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly? I have an extensive IT background but not much familiarity with Linux OS, so go easy on me. Steve N7TX From nhardman1428 at gmail.com Fri Nov 9 20:22:05 2018 From: nhardman1428 at gmail.com (Nate Hardman) Date: Fri, 9 Nov 2018 15:22:05 -0500 Subject: [App_rpt-users] Allstar node Scheduler Help In-Reply-To: References: Message-ID: Which version of allstar are you running? ASL v1.01 or Hamvoip ? If your schedule is all commented out and something is still keying on the hour but not announcing the time, check the cron. may have to be user root. On Fri, Nov 9, 2018 at 2:22 PM Steve Thompson wrote: > I?ve recently created a new Allstar node, and I?m working my way through > some issues. One issue is that every hour, on the hour, the node transmits > a dead carrier for 3 minutes, then there?s a CW message telling me it?s a > timeout. Then the node unkeys. > > Very early on in the process of bringing my new node alive, the node was > transmitting the time (in voice) at the top of the hour. So I have to > believe this was the same process which is now working incorrectly. And > perhaps I did something at some point to cause it to error out. > > I?ve searched through all the conf files in /etc/asterisk and the only > reference to any sort of schedule is in rpt.conf. In the [schedule...] > section, the only two lines (which reference a macro to be run on the hour) > are both commented out with semi-colons. I did not comment them out. I > would think since they are commented out, they?d not be running .. unless > there?s something somewhere else triggering this behavior. > > Where else can I see what is going on with a schedule? Any thoughts on how > to (1) in the short term, disable this scheduled event, and (2) in the long > term, fix it so that it works properly? > > I have an extensive IT background but not much familiarity with Linux OS, > so go easy on me. > > Steve N7TX > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Nathan Hardman nhardman1428 at gmail.com N8THN at ARRL.NET -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Fri Nov 9 20:34:13 2018 From: mm at midnighteng.com (Mike) Date: Fri, 9 Nov 2018 15:34:13 -0500 Subject: [App_rpt-users] Allstar node Scheduler Help In-Reply-To: References: Message-ID: Run asterisk in the foreground with some verbosity ( asterisk -r -vvv) from putty or console and watch the screen for live events to see what is being called. ...mike/kb8jnm On 11/9/2018 2:22 PM, Steve Thompson wrote: > I?ve recently created a new Allstar node, and I?m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there?s a CW message telling me it?s a timeout. Then the node unkeys. > > Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out. > > I?ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf. In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they?d not be running .. unless there?s something somewhere else triggering this behavior. > > Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly? > > I have an extensive IT background but not much familiarity with Linux OS, so go easy on me. > > Steve N7TX > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From steve.n7tx at gmail.com Fri Nov 9 22:15:39 2018 From: steve.n7tx at gmail.com (Steve Thompson) Date: Fri, 9 Nov 2018 15:15:39 -0700 Subject: [App_rpt-users] Allstar node Scheduler Help In-Reply-To: References: Message-ID: <06D8843E-7513-4085-96BF-8DE39BCED3C6@gmail.com> Thanks for the suggestion. I?m running a hamvoip instance on RPi 3. I?ve captured the logs. Here?s what is happening: After 3 min of hang time, I get ?TO? in CW (presumably that is ?time out?). Then a new line is generated to the log which says: playing /tmp/current-time Then I get two separate lines that say: Hungup ?DAHDI pseudo...? There IS a file in /tmp named ?current-time.gsm?. I don?t know what the .gsm extension means though. The file is not a text file. What is ?DAHDI?? Any thoughts on how this is scheduled? And why it?s erroring out? Thanks > On Nov 9, 2018, at 13:34, Mike wrote: > > Run asterisk in the foreground with some verbosity ( asterisk -r -vvv) from putty or console and watch the screen for live events to see what is being called. > > ...mike/kb8jnm > >> On 11/9/2018 2:22 PM, Steve Thompson wrote: >> I?ve recently created a new Allstar node, and I?m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there?s a CW message telling me it?s a timeout. Then the node unkeys. >> >> Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out. >> >> I?ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf. In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they?d not be running .. unless there?s something somewhere else triggering this behavior. >> >> Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly? >> >> I have an extensive IT background but not much familiarity with Linux OS, so go easy on me. >> >> Steve N7TX >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From steve.n7tx at gmail.com Fri Nov 9 22:39:02 2018 From: steve.n7tx at gmail.com (Steve Thompson) Date: Fri, 9 Nov 2018 15:39:02 -0700 Subject: [App_rpt-users] Allstar node Scheduler Help In-Reply-To: References: Message-ID: <3073B6DB-4797-4868-A408-36ABAD9AA00B@gmail.com> hamvoip ... how do I check the cron? Thanks > On Nov 9, 2018, at 13:22, Nate Hardman wrote: > > Which version of allstar are you running? ASL v1.01 or Hamvoip ? If your schedule is all commented out and something is still keying on the hour but not announcing the time, check the cron. may have to be user root. > >> On Fri, Nov 9, 2018 at 2:22 PM Steve Thompson wrote: >> I?ve recently created a new Allstar node, and I?m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there?s a CW message telling me it?s a timeout. Then the node unkeys. >> >> Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out. >> >> I?ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf. In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they?d not be running .. unless there?s something somewhere else triggering this behavior. >> >> Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly? >> >> I have an extensive IT background but not much familiarity with Linux OS, so go easy on me. >> >> Steve N7TX >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > -- > > Nathan Hardman > nhardman1428 at gmail.com > N8THN at ARRL.NET > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From overthetop52 at yahoo.com Fri Nov 9 22:44:52 2018 From: overthetop52 at yahoo.com (Pete Fierro) Date: Fri, 9 Nov 2018 22:44:52 +0000 (UTC) Subject: [App_rpt-users] Allstar node Scheduler Help In-Reply-To: <3073B6DB-4797-4868-A408-36ABAD9AA00B@gmail.com> References: <3073B6DB-4797-4868-A408-36ABAD9AA00B@gmail.com> Message-ID: <512314220.68171.1541803492497@mail.yahoo.com> var/spool/cron/crontabs PeteKD2ARB Sent from Yahoo Mail on Android On Fri, Nov 9, 2018 at 17:39, Steve Thompson wrote: _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: Untitled URL: From w5jr.lists at gmail.com Sat Nov 10 01:45:11 2018 From: w5jr.lists at gmail.com (Mike - W5JR) Date: Fri, 9 Nov 2018 20:45:11 -0500 Subject: [App_rpt-users] Allstar node Scheduler Help In-Reply-To: <3073B6DB-4797-4868-A408-36ABAD9AA00B@gmail.com> References: <3073B6DB-4797-4868-A408-36ABAD9AA00B@gmail.com> Message-ID: <64424D66-38FF-4F5A-AB2D-A27B339FA238@gmail.com> Steve, the hamvoip site discusses this topic directly on their website. It?s about page 19 in the pdf version. tnx Mike / W5JR Alpharetta GA > On Nov 9, 2018, at 5:39 PM, Steve Thompson wrote: > > hamvoip ... how do I check the cron? > > Thanks > >> On Nov 9, 2018, at 13:22, Nate Hardman wrote: >> >> Which version of allstar are you running? ASL v1.01 or Hamvoip ? If your schedule is all commented out and something is still keying on the hour but not announcing the time, check the cron. may have to be user root. >> >>> On Fri, Nov 9, 2018 at 2:22 PM Steve Thompson wrote: >>> I?ve recently created a new Allstar node, and I?m working my way through some issues. One issue is that every hour, on the hour, the node transmits a dead carrier for 3 minutes, then there?s a CW message telling me it?s a timeout. Then the node unkeys. >>> >>> Very early on in the process of bringing my new node alive, the node was transmitting the time (in voice) at the top of the hour. So I have to believe this was the same process which is now working incorrectly. And perhaps I did something at some point to cause it to error out. >>> >>> I?ve searched through all the conf files in /etc/asterisk and the only reference to any sort of schedule is in rpt.conf. In the [schedule...] section, the only two lines (which reference a macro to be run on the hour) are both commented out with semi-colons. I did not comment them out. I would think since they are commented out, they?d not be running .. unless there?s something somewhere else triggering this behavior. >>> >>> Where else can I see what is going on with a schedule? Any thoughts on how to (1) in the short term, disable this scheduled event, and (2) in the long term, fix it so that it works properly? >>> >>> I have an extensive IT background but not much familiarity with Linux OS, so go easy on me. >>> >>> Steve N7TX >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> >> -- >> >> Nathan Hardman >> nhardman1428 at gmail.com >> N8THN at ARRL.NET >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From edbathgate at zoominternet.net Wed Nov 14 01:43:37 2018 From: edbathgate at zoominternet.net (edbathgate at zoominternet.net) Date: Tue, 13 Nov 2018 20:43:37 -0500 (EST) Subject: [App_rpt-users] Source for Weather scripts for X86 ASL 1.1 In-Reply-To: <51337217.867268778.1542159592021.JavaMail.zimbra@zoominternet.net> Message-ID: <371375417.867280237.1542159817930.JavaMail.zimbra@zoominternet.net> Hi All, I am looking for weather scripts for the X86 version of ASL Debian Stretch. I have had success in getting it to speak the .ulaw files and say some rather surprising things, but curious to see other's efforts of weather status, forecast, and alert scripts before I reinvent the wheel. Thanks 73 Ed N3SDO -------------- next part -------------- An HTML attachment was scrubbed... URL: From markjohnston73 at gmail.com Wed Nov 14 02:11:04 2018 From: markjohnston73 at gmail.com (Mark Johnston) Date: Tue, 13 Nov 2018 18:11:04 -0800 Subject: [App_rpt-users] Source for Weather scripts for X86 ASL 1.1 In-Reply-To: <371375417.867280237.1542159817930.JavaMail.zimbra@zoominternet.net> References: <51337217.867268778.1542159592021.JavaMail.zimbra@zoominternet.net> <371375417.867280237.1542159817930.JavaMail.zimbra@zoominternet.net> Message-ID: I did one by zipcode... I think it's on my site markjohnston.us if not I can send it later. On Tue, Nov 13, 2018, 17:43 Hi All, I am looking for weather scripts for the X86 version of ASL > Debian Stretch. I have had success in getting it to speak the .ulaw files > and say some rather surprising things, but curious to see other's efforts > of weather status, forecast, and alert scripts before I reinvent the wheel. > Thanks 73 Ed N3SDO > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kizzy at lusfiber.net Wed Nov 14 02:53:29 2018 From: kizzy at lusfiber.net (Steve Mahler) Date: Tue, 13 Nov 2018 20:53:29 -0600 Subject: [App_rpt-users] Source for Weather scripts for X86 ASL 1.1 In-Reply-To: <371375417.867280237.1542159817930.JavaMail.zimbra@zoominternet.net> References: <371375417.867280237.1542159817930.JavaMail.zimbra@zoominternet.net> Message-ID: <548c6a05-7095-2d5a-a22a-401da8116c28@lusfiber.net> Ed: Take a peak at? .....? KF5VH.com/auto-skywarn? ...? It does more than just SkyWarn stuff (see Other Goodies). Also available is? ...? KF5VH.com/mid-jb-pri These are not commercial products, just some code (shell scripts) written for fun. ...STeve - KF5VH On 11/13/2018 7:43 PM, edbathgate at zoominternet.net wrote: > Hi All, ?I am looking for weather scripts for the X86 version of ASL > Debian Stretch. ? I have had success in getting it to speak the .ulaw > files and say some rather surprising things, ?but curious to see > other's efforts of weather status, forecast, and alert scripts before > I reinvent the wheel. > Thanks ?73 ?Ed N3SDO > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Fri Nov 16 16:34:04 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 16 Nov 2018 11:34:04 -0500 Subject: [App_rpt-users] RX Only Mode Via DTMF Command Message-ID: Hi All, I have a feeling I will facepalm myself for this one. I want to be able to connect a link in RX only mode (NOT local monitor) via a macro, but I cannot for the life of me find the command or COP functions to do it. I know it is possible in Allmon, but I need to be able to do it in a macro. Local monitor won't work for the application I need it for. I have my echolink connection setup on a private node on my system so that I can connect it to any of my nodes that I need it for. There are times where I need to connect it to a node in RX only mode. Local monitor wont't let audio move from the bridge node to the main node. Thanks, Jeff -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From Bryan at bryanfields.net Fri Nov 16 16:59:34 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Fri, 16 Nov 2018 11:59:34 -0500 Subject: [App_rpt-users] RX Only Mode Via DTMF Command In-Reply-To: References: Message-ID: On 11/16/18 11:34 AM, Jeff Lehman wrote: > Hi All, > I have a feeling I will facepalm myself for this one. I want to be > able to connect a link in RX only mode (NOT local monitor) via a macro, but > I cannot for the life of me find the command or COP functions to do it. I > know it is possible in Allmon, but I need to be able to do it in a macro. There's ilink,2, which is mapped to *2[NODE] to connect a node in receive only. You would then define a macro like 42 = *240821#, and call it via *542 from the repeater. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From kc8qch at gmail.com Fri Nov 16 18:03:47 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 16 Nov 2018 13:03:47 -0500 Subject: [App_rpt-users] RX Only Mode Via DTMF Command In-Reply-To: References: Message-ID: And there it was....See....FacePalm....Thanks Bryan On Fri, Nov 16, 2018 at 11:59 AM Bryan Fields wrote: > On 11/16/18 11:34 AM, Jeff Lehman wrote: > > Hi All, > > I have a feeling I will facepalm myself for this one. I want to be > > able to connect a link in RX only mode (NOT local monitor) via a macro, > but > > I cannot for the life of me find the command or COP functions to do it. I > > know it is possible in Allmon, but I need to be able to do it in a macro. > > There's ilink,2, which is mapped to *2[NODE] to connect a node in receive > only. > > You would then define a macro like 42 = *240821#, and call it via *542 from > the repeater. > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From Bryan at bryanfields.net Fri Nov 16 18:36:55 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Fri, 16 Nov 2018 13:36:55 -0500 Subject: [App_rpt-users] RX Only Mode Via DTMF Command In-Reply-To: References: Message-ID: On 11/16/18 1:03 PM, Jeff Lehman wrote: > And there it was....See....FacePalm....Thanks Bryan You know there's a unicode for FacePalm ? ?\_(?)_/? :D -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From kc8qch at gmail.com Fri Nov 16 18:40:15 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 16 Nov 2018 13:40:15 -0500 Subject: [App_rpt-users] RX Only Mode Via DTMF Command In-Reply-To: References: Message-ID: NO WAY!!!!! I need that one!!!! LOL On Fri, Nov 16, 2018 at 1:37 PM Bryan Fields wrote: > On 11/16/18 1:03 PM, Jeff Lehman wrote: > > And there it was....See....FacePalm....Thanks Bryan > > You know there's a unicode for FacePalm ? > > ?\_(?)_/? > > :D > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Fri Nov 16 19:05:06 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 16 Nov 2018 14:05:06 -0500 Subject: [App_rpt-users] Autopatch Message-ID: So since I am on a roll today, here's another to Chew on. I have Incredible PBX setup on a Pi here. I use it (at least till Google shut off the GVSIP service today) for my home phone as well as Allstar and Hamshack Hotline (See hamshackhotline.com for more info). I want to make one of my allstar nodes dial out through my PBX.....Incredible PBX is based on FreePBX and Asterisk sooo... I have calling from the PBX to ASL working fine. I can dial an extension from any of my phones and it connects to my ASL nodes. I am stumped on From ASL to PBX. Here is what I have done..... I followed the Directions on this page: http://docs.allstarlink.org/drupal/node/133 So first I went into Rpt.conf and set those settings. I used "pstn-out"for the context in Rpt.conf for the autopatch. Next I went into extensions.conf and set the following in pstn-out: [pstn-out] exten => _XXX,1,Dial,SIP/pbx-autopatch/${Exten} exten => _XXX,2, congestion Note that XXX is for internal extensions. I use 3 digit extensions internally for phones. Next I went to sip.conf and set up the following stanza: [pbx-autopatch] type=peer allowguest=yes nat=yes autocreatepeer=yes insecure=port,invite auth=md5 username= password=nunya host= qualify=no disallow=all allow=ulaw allowexternaldomains=yes context=pstn-out When I dial *61 + internal extension (203 for example) it waits a few seconds then gives me fast busy When I watch on the asterisk CLI it tries to connect is not able to connect and at one point says "no such host: pbx-autopatch" (I would paste the log but I am not home to be able to copy and paste) Any initial thoughts? I've been playing with asterisk/freePBX/allstar for a little over a year now and I am confident with it, but this one has me stumped now...And it's tough to find documentation on this. or I am other thinking this and not able to wrap my head around it. Thanks much for letting me ramble. Jeff -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From cummingsj at gmail.com Fri Nov 16 19:12:20 2018 From: cummingsj at gmail.com (JJC) Date: Fri, 16 Nov 2018 12:12:20 -0700 Subject: [App_rpt-users] Autopatch In-Reply-To: References: Message-ID: Jeff - it's funny that you mention this... I have broken down here: http://enhanced.github.io/2016/04/AllStar_AutoPatch how I got autopatch working with a SIP service, which is what the freepbx trunk should look like to ASL... It's funny that you mention this because I'm hoping to sit down next week and work through some of this just to get GVSIP working since that's Googles new incantation of "SIP" and publish some documentation. JJC N0PKT On Fri, Nov 16, 2018 at 12:05 PM Jeff Lehman wrote: > So since I am on a roll today, here's another to Chew on. > > I have Incredible PBX setup on a Pi here. I use it (at least till Google > shut off the GVSIP service today) for my home phone as well as Allstar and > Hamshack Hotline (See hamshackhotline.com for more info). > > I want to make one of my allstar nodes dial out through my > PBX.....Incredible PBX is based on FreePBX and Asterisk sooo... > > I have calling from the PBX to ASL working fine. I can dial an extension > from any of my phones and it connects to my ASL nodes. > > I am stumped on From ASL to PBX. Here is what I have done..... > > I followed the Directions on this page: > http://docs.allstarlink.org/drupal/node/133 > > So first I went into Rpt.conf and set those settings. I used "pstn-out"for > the context in Rpt.conf for the autopatch. Next I went into extensions.conf > and set the following in pstn-out: > > [pstn-out] > exten => _XXX,1,Dial,SIP/pbx-autopatch/${Exten} > exten => _XXX,2, congestion > > Note that XXX is for internal extensions. I use 3 digit extensions > internally for phones. Next I went to sip.conf and set up the following > stanza: > > [pbx-autopatch] > type=peer > allowguest=yes > nat=yes > autocreatepeer=yes > insecure=port,invite > auth=md5 > username= > password=nunya > host= > qualify=no > disallow=all > allow=ulaw > allowexternaldomains=yes > context=pstn-out > > When I dial *61 + internal extension (203 for example) it waits a few > seconds then gives me fast busy > > When I watch on the asterisk CLI it tries to connect is not able to > connect and at one point says "no such host: pbx-autopatch" > > (I would paste the log but I am not home to be able to copy and paste) > > Any initial thoughts? I've been playing with asterisk/freePBX/allstar for > a little over a year now and I am confident with it, but this one has me > stumped now...And it's tough to find documentation on this. or I am other > thinking this and not able to wrap my head around it. > > Thanks much for letting me ramble. > > Jeff > > -- > Jeff Lehman, KC8QCH > E-mail: kc8qch at gmail.com > http://kc8qch.dx.am > Hamshack Hotline: 4218 > > Webmaster > Hamilton County ARPSC > http://www.hamcoarpsc.org > E-mail: hamcoarpsc at gmail.com > Phone: 513-452-6480 > > Allstar 47374 Administrator > Project Manager, HHUL > World Wide Amateur Radio Guild > http://www.theguildglobal.org > E-Mail: kc8qch at theguildglobal.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Fri Nov 16 19:15:24 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 16 Nov 2018 14:15:24 -0500 Subject: [App_rpt-users] Autopatch In-Reply-To: References: Message-ID: Oh awesome I will take a look at it and see what you have. Don't bang your head on the GVSIP wall however. Sadly Google has stated that asterisk connections to GVSIP are a violation of TOS and has turned off GVSIP access to all but OBIHAI devices.... http://nerdvittles.com/?p=27274 I had 2 GVSIP trunks coming into the PBX and neither of them work today. Jeff On Fri, Nov 16, 2018 at 2:12 PM JJC wrote: > Jeff - it's funny that you mention this... I have broken down here: > http://enhanced.github.io/2016/04/AllStar_AutoPatch how I got autopatch > working with a SIP service, which is what the freepbx trunk should look > like to ASL... > > It's funny that you mention this because I'm hoping to sit down next week > and work through some of this just to get GVSIP working since that's > Googles new incantation of "SIP" and publish some documentation. > > JJC > N0PKT > > On Fri, Nov 16, 2018 at 12:05 PM Jeff Lehman wrote: > >> So since I am on a roll today, here's another to Chew on. >> >> I have Incredible PBX setup on a Pi here. I use it (at least till Google >> shut off the GVSIP service today) for my home phone as well as Allstar and >> Hamshack Hotline (See hamshackhotline.com for more info). >> >> I want to make one of my allstar nodes dial out through my >> PBX.....Incredible PBX is based on FreePBX and Asterisk sooo... >> >> I have calling from the PBX to ASL working fine. I can dial an extension >> from any of my phones and it connects to my ASL nodes. >> >> I am stumped on From ASL to PBX. Here is what I have done..... >> >> I followed the Directions on this page: >> http://docs.allstarlink.org/drupal/node/133 >> >> So first I went into Rpt.conf and set those settings. I used >> "pstn-out"for the context in Rpt.conf for the autopatch. Next I went into >> extensions.conf and set the following in pstn-out: >> >> [pstn-out] >> exten => _XXX,1,Dial,SIP/pbx-autopatch/${Exten} >> exten => _XXX,2, congestion >> >> Note that XXX is for internal extensions. I use 3 digit extensions >> internally for phones. Next I went to sip.conf and set up the following >> stanza: >> >> [pbx-autopatch] >> type=peer >> allowguest=yes >> nat=yes >> autocreatepeer=yes >> insecure=port,invite >> auth=md5 >> username= >> password=nunya >> host= >> qualify=no >> disallow=all >> allow=ulaw >> allowexternaldomains=yes >> context=pstn-out >> >> When I dial *61 + internal extension (203 for example) it waits a few >> seconds then gives me fast busy >> >> When I watch on the asterisk CLI it tries to connect is not able to >> connect and at one point says "no such host: pbx-autopatch" >> >> (I would paste the log but I am not home to be able to copy and paste) >> >> Any initial thoughts? I've been playing with asterisk/freePBX/allstar for >> a little over a year now and I am confident with it, but this one has me >> stumped now...And it's tough to find documentation on this. or I am other >> thinking this and not able to wrap my head around it. >> >> Thanks much for letting me ramble. >> >> Jeff >> >> -- >> Jeff Lehman, KC8QCH >> E-mail: kc8qch at gmail.com >> http://kc8qch.dx.am >> Hamshack Hotline: 4218 >> >> Webmaster >> Hamilton County ARPSC >> http://www.hamcoarpsc.org >> E-mail: hamcoarpsc at gmail.com >> Phone: 513-452-6480 >> >> Allstar 47374 Administrator >> Project Manager, HHUL >> World Wide Amateur Radio Guild >> http://www.theguildglobal.org >> E-Mail: kc8qch at theguildglobal.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From cummingsj at gmail.com Fri Nov 16 19:21:31 2018 From: cummingsj at gmail.com (JJC) Date: Fri, 16 Nov 2018 12:21:31 -0700 Subject: [App_rpt-users] Autopatch In-Reply-To: References: Message-ID: Yeah I saw that, as luck has it I have an OBIHAI device and have read the article that you noted several times, just not had time to actually monkey with it lol. On Fri, Nov 16, 2018 at 12:15 PM Jeff Lehman wrote: > > Oh awesome I will take a look at it and see what you have. > > Don't bang your head on the GVSIP wall however. Sadly Google has stated > that asterisk connections to GVSIP are a violation of TOS and has turned > off GVSIP access to all but OBIHAI devices.... > > http://nerdvittles.com/?p=27274 > > I had 2 GVSIP trunks coming into the PBX and neither of them work today. > > Jeff > > On Fri, Nov 16, 2018 at 2:12 PM JJC wrote: > >> Jeff - it's funny that you mention this... I have broken down here: >> http://enhanced.github.io/2016/04/AllStar_AutoPatch how I got autopatch >> working with a SIP service, which is what the freepbx trunk should look >> like to ASL... >> >> It's funny that you mention this because I'm hoping to sit down next week >> and work through some of this just to get GVSIP working since that's >> Googles new incantation of "SIP" and publish some documentation. >> >> JJC >> N0PKT >> >> On Fri, Nov 16, 2018 at 12:05 PM Jeff Lehman wrote: >> >>> So since I am on a roll today, here's another to Chew on. >>> >>> I have Incredible PBX setup on a Pi here. I use it (at least till Google >>> shut off the GVSIP service today) for my home phone as well as Allstar and >>> Hamshack Hotline (See hamshackhotline.com for more info). >>> >>> I want to make one of my allstar nodes dial out through my >>> PBX.....Incredible PBX is based on FreePBX and Asterisk sooo... >>> >>> I have calling from the PBX to ASL working fine. I can dial an extension >>> from any of my phones and it connects to my ASL nodes. >>> >>> I am stumped on From ASL to PBX. Here is what I have done..... >>> >>> I followed the Directions on this page: >>> http://docs.allstarlink.org/drupal/node/133 >>> >>> So first I went into Rpt.conf and set those settings. I used >>> "pstn-out"for the context in Rpt.conf for the autopatch. Next I went into >>> extensions.conf and set the following in pstn-out: >>> >>> [pstn-out] >>> exten => _XXX,1,Dial,SIP/pbx-autopatch/${Exten} >>> exten => _XXX,2, congestion >>> >>> Note that XXX is for internal extensions. I use 3 digit extensions >>> internally for phones. Next I went to sip.conf and set up the following >>> stanza: >>> >>> [pbx-autopatch] >>> type=peer >>> allowguest=yes >>> nat=yes >>> autocreatepeer=yes >>> insecure=port,invite >>> auth=md5 >>> username= >>> password=nunya >>> host= >>> qualify=no >>> disallow=all >>> allow=ulaw >>> allowexternaldomains=yes >>> context=pstn-out >>> >>> When I dial *61 + internal extension (203 for example) it waits a few >>> seconds then gives me fast busy >>> >>> When I watch on the asterisk CLI it tries to connect is not able to >>> connect and at one point says "no such host: pbx-autopatch" >>> >>> (I would paste the log but I am not home to be able to copy and paste) >>> >>> Any initial thoughts? I've been playing with asterisk/freePBX/allstar >>> for a little over a year now and I am confident with it, but this one has >>> me stumped now...And it's tough to find documentation on this. or I am >>> other thinking this and not able to wrap my head around it. >>> >>> Thanks much for letting me ramble. >>> >>> Jeff >>> >>> -- >>> Jeff Lehman, KC8QCH >>> E-mail: kc8qch at gmail.com >>> http://kc8qch.dx.am >>> Hamshack Hotline: 4218 >>> >>> Webmaster >>> Hamilton County ARPSC >>> http://www.hamcoarpsc.org >>> E-mail: hamcoarpsc at gmail.com >>> Phone: 513-452-6480 >>> >>> Allstar 47374 Administrator >>> Project Manager, HHUL >>> World Wide Amateur Radio Guild >>> http://www.theguildglobal.org >>> E-Mail: kc8qch at theguildglobal.net >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > -- > Jeff Lehman, KC8QCH > E-mail: kc8qch at gmail.com > http://kc8qch.dx.am > Hamshack Hotline: 4218 > > Webmaster > Hamilton County ARPSC > http://www.hamcoarpsc.org > E-mail: hamcoarpsc at gmail.com > Phone: 513-452-6480 > > Allstar 47374 Administrator > Project Manager, HHUL > World Wide Amateur Radio Guild > http://www.theguildglobal.org > E-Mail: kc8qch at theguildglobal.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Fri Nov 16 19:28:28 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 16 Nov 2018 14:28:28 -0500 Subject: [App_rpt-users] Autopatch In-Reply-To: References: Message-ID: HA well there you go that works! Good Luck with that! :) On Fri, Nov 16, 2018 at 2:21 PM JJC wrote: > Yeah I saw that, as luck has it I have an OBIHAI device and have read the > article that you noted several times, just not had time to actually monkey > with it lol. > > > On Fri, Nov 16, 2018 at 12:15 PM Jeff Lehman wrote: > >> >> Oh awesome I will take a look at it and see what you have. >> >> Don't bang your head on the GVSIP wall however. Sadly Google has stated >> that asterisk connections to GVSIP are a violation of TOS and has turned >> off GVSIP access to all but OBIHAI devices.... >> >> http://nerdvittles.com/?p=27274 >> >> I had 2 GVSIP trunks coming into the PBX and neither of them work today. >> >> Jeff >> >> On Fri, Nov 16, 2018 at 2:12 PM JJC wrote: >> >>> Jeff - it's funny that you mention this... I have broken down here: >>> http://enhanced.github.io/2016/04/AllStar_AutoPatch how I got autopatch >>> working with a SIP service, which is what the freepbx trunk should look >>> like to ASL... >>> >>> It's funny that you mention this because I'm hoping to sit down next >>> week and work through some of this just to get GVSIP working since that's >>> Googles new incantation of "SIP" and publish some documentation. >>> >>> JJC >>> N0PKT >>> >>> On Fri, Nov 16, 2018 at 12:05 PM Jeff Lehman wrote: >>> >>>> So since I am on a roll today, here's another to Chew on. >>>> >>>> I have Incredible PBX setup on a Pi here. I use it (at least till >>>> Google shut off the GVSIP service today) for my home phone as well as >>>> Allstar and Hamshack Hotline (See hamshackhotline.com for more info). >>>> >>>> I want to make one of my allstar nodes dial out through my >>>> PBX.....Incredible PBX is based on FreePBX and Asterisk sooo... >>>> >>>> I have calling from the PBX to ASL working fine. I can dial an >>>> extension from any of my phones and it connects to my ASL nodes. >>>> >>>> I am stumped on From ASL to PBX. Here is what I have done..... >>>> >>>> I followed the Directions on this page: >>>> http://docs.allstarlink.org/drupal/node/133 >>>> >>>> So first I went into Rpt.conf and set those settings. I used >>>> "pstn-out"for the context in Rpt.conf for the autopatch. Next I went into >>>> extensions.conf and set the following in pstn-out: >>>> >>>> [pstn-out] >>>> exten => _XXX,1,Dial,SIP/pbx-autopatch/${Exten} >>>> exten => _XXX,2, congestion >>>> >>>> Note that XXX is for internal extensions. I use 3 digit extensions >>>> internally for phones. Next I went to sip.conf and set up the following >>>> stanza: >>>> >>>> [pbx-autopatch] >>>> type=peer >>>> allowguest=yes >>>> nat=yes >>>> autocreatepeer=yes >>>> insecure=port,invite >>>> auth=md5 >>>> username= >>>> password=nunya >>>> host= >>>> qualify=no >>>> disallow=all >>>> allow=ulaw >>>> allowexternaldomains=yes >>>> context=pstn-out >>>> >>>> When I dial *61 + internal extension (203 for example) it waits a few >>>> seconds then gives me fast busy >>>> >>>> When I watch on the asterisk CLI it tries to connect is not able to >>>> connect and at one point says "no such host: pbx-autopatch" >>>> >>>> (I would paste the log but I am not home to be able to copy and paste) >>>> >>>> Any initial thoughts? I've been playing with asterisk/freePBX/allstar >>>> for a little over a year now and I am confident with it, but this one has >>>> me stumped now...And it's tough to find documentation on this. or I am >>>> other thinking this and not able to wrap my head around it. >>>> >>>> Thanks much for letting me ramble. >>>> >>>> Jeff >>>> >>>> -- >>>> Jeff Lehman, KC8QCH >>>> E-mail: kc8qch at gmail.com >>>> http://kc8qch.dx.am >>>> Hamshack Hotline: 4218 >>>> >>>> Webmaster >>>> Hamilton County ARPSC >>>> http://www.hamcoarpsc.org >>>> E-mail: hamcoarpsc at gmail.com >>>> Phone: 513-452-6480 >>>> >>>> Allstar 47374 Administrator >>>> Project Manager, HHUL >>>> World Wide Amateur Radio Guild >>>> http://www.theguildglobal.org >>>> E-Mail: kc8qch at theguildglobal.net >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users at lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> and scroll down to the bottom of the page. Enter your email address and >>>> press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email >>>> confirmation. If you have trouble unsubscribing, please send a message to >>>> the list detailing the problem. >>>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> >> >> -- >> Jeff Lehman, KC8QCH >> E-mail: kc8qch at gmail.com >> http://kc8qch.dx.am >> Hamshack Hotline: 4218 >> >> Webmaster >> Hamilton County ARPSC >> http://www.hamcoarpsc.org >> E-mail: hamcoarpsc at gmail.com >> Phone: 513-452-6480 >> >> Allstar 47374 Administrator >> Project Manager, HHUL >> World Wide Amateur Radio Guild >> http://www.theguildglobal.org >> E-Mail: kc8qch at theguildglobal.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Sat Nov 17 20:21:19 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sat, 17 Nov 2018 12:21:19 -0800 Subject: [App_rpt-users] New allstarlink.org will not have download configs Message-ID: The new allstarlink.org site is nearly complete. While there is much to tell you about the new site, there is one feature that will not be there. The new site will not have the capability to download configs to your node. This feature has long outlived its usefulness and there are better options these days. One option to consider is upgrading your node. Current nodes have a menu system providing capabilities beyond the old config download. Of course there are the built in editors such as nano and vi. Another option is to use a tool like WinSCP. It is important to note that only the ability to configure your node from the website will be lost. Your node will still work normally after the new site rollout, and other methods of configuration are not affected. Although we do not have a date for the rollover to the new web site, we are taking this opportunity to inform you of the coming change. You may preview the new site at web-tpa.allstarlink.org -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From qrz at tg9aor.net Sun Nov 18 01:07:05 2018 From: qrz at tg9aor.net (=?UTF-8?Q?Jos=C3=A9_Roberto_Ru=C3=ADz_Garc=C3=ADa_Salas_TG9AOR?=) Date: Sun, 18 Nov 2018 01:07:05 +0000 (UTC) Subject: [App_rpt-users] Node information display Message-ID: Hello to all. I would like to know in what file resides the information pertaining to the node frequency, CTCSS, etc. I have noticed some nodes on the stats page display bridging information on the frequency field, I would like to update my node to reflect that. Also, is there a way to input this information for the private nodes as well? 73 Jos? Roberto Ru?z Garc?a Salas TG9AOR -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Sun Nov 18 03:19:18 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sat, 17 Nov 2018 19:19:18 -0800 Subject: [App_rpt-users] Node information display In-Reply-To: References: Message-ID: Private nodes cannot report their status to the stats server. The frequency field is freeform. You may put any information in there. Frequency and tome are on the Radio/Interface tap of the Node Configuration page. On Sat, Nov 17, 2018 at 5:07 PM Jos? Roberto Ru?z Garc?a Salas TG9AOR < qrz at tg9aor.net> wrote: > Hello to all. I would like to know in what file resides the information > pertaining to the node frequency, CTCSS, etc. > > I have noticed some nodes on the stats page display bridging information > on the frequency field, I would like to update my node to reflect that. > > Also, is there a way to input this information for the private nodes as > well? > > > 73 > > Jos? Roberto Ru?z Garc?a Salas TG9AOR > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From k6kya at hokeynet.net Sun Nov 18 03:31:41 2018 From: k6kya at hokeynet.net (Steve Passmore) Date: Sat, 17 Nov 2018 19:31:41 -0800 Subject: [App_rpt-users] Node information display In-Reply-To: References: Message-ID: There is no file. The info is from what is entered into your node configuration when you are logged into the allstarlink.org website. Steve, k6kya On Sat, Nov 17, 2018, 5:07 PM Jos? Roberto Ru?z Garc?a Salas TG9AOR < qrz at tg9aor.net wrote: > Hello to all. I would like to know in what file resides the information > pertaining to the node frequency, CTCSS, etc. > > I have noticed some nodes on the stats page display bridging information > on the frequency field, I would like to update my node to reflect that. > > Also, is there a way to input this information for the private nodes as > well? > > > 73 > > Jos? Roberto Ru?z Garc?a Salas TG9AOR > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Sun Nov 18 03:50:08 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sat, 17 Nov 2018 19:50:08 -0800 Subject: [App_rpt-users] Node information display In-Reply-To: References: Message-ID: Yes, Steve is right. I wasn't clear about that info being on the web site allstarlink.org. Or you can change it on the future allstarlink site at https://web-tpa.allstarlink.org/portal/nodes.php It uses the same login and data. On Sat, Nov 17, 2018 at 7:32 PM Steve Passmore wrote: > There is no file. The info is from what is entered into your node > configuration when you are logged into the allstarlink.org website. > > Steve, k6kya > > On Sat, Nov 17, 2018, 5:07 PM Jos? Roberto Ru?z Garc?a Salas TG9AOR < > qrz at tg9aor.net wrote: > >> Hello to all. I would like to know in what file resides the information >> pertaining to the node frequency, CTCSS, etc. >> >> I have noticed some nodes on the stats page display bridging information >> on the frequency field, I would like to update my node to reflect that. >> >> Also, is there a way to input this information for the private nodes as >> well? >> >> >> 73 >> >> Jos? Roberto Ru?z Garc?a Salas TG9AOR >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From vacuumtubesforever at gmail.com Sun Nov 18 16:11:29 2018 From: vacuumtubesforever at gmail.com (Ed Wilhelm) Date: Sun, 18 Nov 2018 11:11:29 -0500 Subject: [App_rpt-users] Audio Delay During Duplex SimpleUSB Message-ID: Been running SimleUSB on my repeater for sometime. All works well except for the variable audio delay, sometimes will hear the end of my own transmission. Know this issue has been around for awile. Someone said try USBRadio, but would think that would use even more processing and agrevate the situation. This is running latest version of ASL on a Raspberry Pi2. Any input appreciated. Ed W8VT -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sun Nov 18 16:30:22 2018 From: mm at midnighteng.com (Mike) Date: Sun, 18 Nov 2018 11:30:22 -0500 Subject: [App_rpt-users] Audio Delay During Duplex SimpleUSB In-Reply-To: References: Message-ID: Ed, ya know I have had the same issue and never had time to fully investigate it. Was never a major issue for me, just a annoyance. It seems to vary in it's delay and I was looking for other processes in memory slowing it down and found nothing and always has plenty of cpu and ram. Nodes with dahdi driver are never a issue on the same server. Could be some interference with cpu time-slice etc ? But, It seems to correspond to me when I did switch to simpleusb this year so I would say try it with usbradio if you have the additional headroom. Perhaps I will switch back as well. It's worth noting and trying. ...mike/kb8jnm On 11/18/2018 11:11 AM, Ed Wilhelm wrote: > Been running SimleUSB on my repeater for sometime. All works well > except for the variable audio delay, sometimes will hear the end of my > own transmission. Know this issue has been around for awile. Someone > said try USBRadio, but would think that would use even more processing > and agrevate the situation. > This is running latest version of ASL on a? Raspberry Pi2. > Any input appreciated. > > Ed W8VT > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sun Nov 18 17:06:58 2018 From: mm at midnighteng.com (Mike) Date: Sun, 18 Nov 2018 12:06:58 -0500 Subject: [App_rpt-users] Node information display In-Reply-To: References: Message-ID: Tim, I wonder if it might be possible for you to add a field to the user node information. That would be a weblink to that nodes/servers ALLMON page. I think it would be a asset to the group. Perhaps I am off on that though. ...mike/kb8jnm On 11/17/2018 10:50 PM, Tim Sawyer wrote: > Yes, Steve is right. I wasn't clear about that info being on the web > site allstarlink.org . Or you can change it on > the future allstarlink site at > https://web-tpa.allstarlink.org/portal/nodes.php > > It uses the same login and data. > > On Sat, Nov 17, 2018 at 7:32 PM Steve Passmore > wrote: > > There is no file.? ?The info is from what is entered into your > node configuration when you are logged into the allstarlink.org > website. > > Steve, k6kya > > On Sat, Nov 17, 2018, 5:07 PM Jos? Roberto Ru?z Garc?a Salas > TG9AOR wrote: > > Hello to all. I would like to know in what file resides the > information pertaining to the node frequency, CTCSS, etc. > > I have noticed some nodes on the stats page display bridging > information on the frequency field, I would like to update my > node to reflect that. > > Also, is there a way to input this information for the private > nodes as well? > > > 73 > > Jos? Roberto Ru?z Garc?a Salas TG9AOR > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via > email confirmation. If you have trouble unsubscribing, please > send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Sun Nov 18 18:39:13 2018 From: mark at metcom.com (Mark DuMoulin) Date: Sun, 18 Nov 2018 18:39:13 +0000 Subject: [App_rpt-users] Votermon Message-ID: <515d29e3c5ca41d5aac3491c7bc10350@metcom.com> Hello. Does anybody here know where I can download a copy of votermon or any suitable monitor program for the Allstar Voter. Tnx Mark WB2ERS -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sun Nov 18 19:16:02 2018 From: mm at midnighteng.com (Mike) Date: Sun, 18 Nov 2018 14:16:02 -0500 Subject: [App_rpt-users] Votermon In-Reply-To: <515d29e3c5ca41d5aac3491c7bc10350@metcom.com> References: <515d29e3c5ca41d5aac3491c7bc10350@metcom.com> Message-ID: Mark, there's a good chance someone will answer you better but there is ALLMON2 that I think tracks voters. It's at github ...mike/kb8jnm On 11/18/2018 1:39 PM, Mark DuMoulin wrote: > > Hello. Does anybody here know where I can download a copy of votermon > or any suitable monitor program for the Allstar Voter. > > Tnx > > Mark WB2ERS > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Sun Nov 18 23:02:09 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sun, 18 Nov 2018 15:02:09 -0800 Subject: [App_rpt-users] Node information display In-Reply-To: References: Message-ID: Mike, Take a look at this https://web-tpa.allstarlink.org/nodelist/. Click on the node number and it will take you to the Allstar stats site. Is that what you were thinking about? On Sun, Nov 18, 2018 at 9:06 AM Mike wrote: > Tim, > > I wonder if it might be possible for you to add a field to the user node > information. > > That would be a weblink to that nodes/servers ALLMON page. > > I think it would be a asset to the group. Perhaps I am off on that though. > > ...mike/kb8jnm > > > On 11/17/2018 10:50 PM, Tim Sawyer wrote: > > Yes, Steve is right. I wasn't clear about that info being on the web site > allstarlink.org. Or you can change it on the future allstarlink site at > https://web-tpa.allstarlink.org/portal/nodes.php > > It uses the same login and data. > > On Sat, Nov 17, 2018 at 7:32 PM Steve Passmore wrote: > >> There is no file. The info is from what is entered into your node >> configuration when you are logged into the allstarlink.org website. >> >> Steve, k6kya >> >> On Sat, Nov 17, 2018, 5:07 PM Jos? Roberto Ru?z Garc?a Salas TG9AOR < >> qrz at tg9aor.net wrote: >> >>> Hello to all. I would like to know in what file resides the information >>> pertaining to the node frequency, CTCSS, etc. >>> >>> I have noticed some nodes on the stats page display bridging information >>> on the frequency field, I would like to update my node to reflect that. >>> >>> Also, is there a way to input this information for the private nodes as >>> well? >>> >>> >>> 73 >>> >>> Jos? Roberto Ru?z Garc?a Salas TG9AOR >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Sun Nov 18 23:04:22 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sun, 18 Nov 2018 15:04:22 -0800 Subject: [App_rpt-users] Votermon In-Reply-To: <515d29e3c5ca41d5aac3491c7bc10350@metcom.com> References: <515d29e3c5ca41d5aac3491c7bc10350@metcom.com> Message-ID: Votermon is an early versions of Allmon. Allmon is available at https://github.com/tsawyer/allmon2 On Sun, Nov 18, 2018 at 10:39 AM Mark DuMoulin wrote: > Hello. Does anybody here know where I can download a copy of votermon or > any suitable monitor program for the Allstar Voter. > > Tnx > > Mark WB2ERS > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sun Nov 18 23:55:03 2018 From: mm at midnighteng.com (Mike) Date: Sun, 18 Nov 2018 18:55:03 -0500 Subject: [App_rpt-users] Node information display In-Reply-To: References: Message-ID: <926fc4fa-e09c-8b55-c287-679f0187092a@midnighteng.com> I have seen that, but no, that's not what I was referring to and by the way, the revision is top notch in my book so don't get me wrong, no matter how good it is someone (like me) will always ask for more...? LOL What I was speaking to was one additional field that might show in that list as you showed the link to, that was nothing more than a place for a HTML link that could be used for ALLMON or a website system info, rules/guidlines etc. User defined. I know it seems out of reach since there is only so much room for all the data that is showing now but would be a nice resource if it can be done. Making it more of the one-stop for all things ASL. Thanks Tim, ...mike/kb8jnm On 11/18/2018 6:02 PM, Tim Sawyer wrote: > Mike, > > Take a look at this https://web-tpa.allstarlink.org/nodelist/. Click > on the node number and it will take you to the Allstar stats site. Is > that what you were thinking about? > > On Sun, Nov 18, 2018 at 9:06 AM Mike > wrote: > > Tim, > > I wonder if it might be possible for you to add a field to the > user node information. > > That would be a weblink to that nodes/servers ALLMON page. > > I think it would be a asset to the group. Perhaps I am off on that > though. > > ...mike/kb8jnm > > > On 11/17/2018 10:50 PM, Tim Sawyer wrote: >> Yes, Steve is right. I wasn't clear about that info being on the >> web site allstarlink.org . Or you can >> change it on the future allstarlink site at >> https://web-tpa.allstarlink.org/portal/nodes.php >> >> It uses the same login and data. >> >> On Sat, Nov 17, 2018 at 7:32 PM Steve Passmore >> > wrote: >> >> There is no file.? ?The info is from what is entered into >> your node configuration when you are logged into the >> allstarlink.org website. >> >> Steve, k6kya >> >> On Sat, Nov 17, 2018, 5:07 PM Jos? Roberto Ru?z Garc?a Salas >> TG9AOR wrote: >> >> Hello to all. I would like to know in what file resides >> the information pertaining to the node frequency, CTCSS, etc. >> >> I have noticed some nodes on the stats page display >> bridging information on the frequency field, I would like >> to update my node to reflect that. >> >> Also, is there a way to input this information for the >> private nodes as well? >> >> >> 73 >> >> Jos? Roberto Ru?z Garc?a Salas TG9AOR >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your >> email address and press the "Unsubscribe or edit options >> button" >> You do not need a password to unsubscribe, you can do it >> via email confirmation. If you have trouble >> unsubscribing, please send a message to the list >> detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email >> address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via >> email confirmation. If you have trouble unsubscribing, please >> send a message to the list detailing the problem. >> >> >> >> -- >> Tim WD6AWP >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Mon Nov 19 01:00:24 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Sun, 18 Nov 2018 17:00:24 -0800 Subject: [App_rpt-users] Audio Delay During Duplex SimpleUSB In-Reply-To: References: Message-ID: Mike, The variable audio delay happens with RTCM's too. Are you running full duplex DAHDI to a device some how? I don't understand how you know that this never happens with the DAHDI driver. On Sun, Nov 18, 2018 at 8:30 AM Mike wrote: > Ed, ya know I have had the same issue and never had time to fully > investigate it. Was never a major issue for me, just a annoyance. > > It seems to vary in it's delay and I was looking for other processes in > memory slowing it down and found nothing and always has plenty of cpu and > ram. > > Nodes with dahdi driver are never a issue on the same server. > > Could be some interference with cpu time-slice etc ? > > But, > > It seems to correspond to me when I did switch to simpleusb this year so I > would say try it with usbradio if you have the additional headroom. > > Perhaps I will switch back as well. It's worth noting and trying. > > ...mike/kb8jnm > On 11/18/2018 11:11 AM, Ed Wilhelm wrote: > > Been running SimleUSB on my repeater for sometime. All works well except > for the variable audio delay, sometimes will hear the end of my own > transmission. Know this issue has been around for awile. Someone said try > USBRadio, but would think that would use even more processing and agrevate > the situation. > This is running latest version of ASL on a Raspberry Pi2. > Any input appreciated. > > Ed W8VT > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Mon Nov 19 02:13:42 2018 From: mm at midnighteng.com (Mike) Date: Sun, 18 Nov 2018 21:13:42 -0500 Subject: [App_rpt-users] Audio Delay During Duplex SimpleUSB In-Reply-To: References: Message-ID: <722e091d-a360-7ed2-24b7-d14744e21649@midnighteng.com> Well, I never hear myself 'after I unkey' if using iaxrpt on a dahdi node. Including on a Pi3 But using? one of the radio nodes (with a radio) that use simpleusb on the same server does create that effect. Perhaps it is not a proper observation for compare since a direct iax stream is not exactly the same handling/buffering. ...mike/kb8jnm On 11/18/2018 8:00 PM, Tim Sawyer wrote: > Mike, > > The variable audio delay happens with RTCM's too. > > Are you running full duplex DAHDI to a device some how? I don't > understand how you know that this never?happens with the DAHDI driver. > > On Sun, Nov 18, 2018 at 8:30 AM Mike > wrote: > > Ed, ya know I have had the same issue and never had time to fully > investigate it. Was never a major issue for me, just a annoyance. > > It seems to vary in it's delay and I was looking for other > processes in memory slowing it down and found nothing and always > has plenty of cpu and ram. > > Nodes with dahdi driver are never a issue on the same server. > > Could be some interference with cpu time-slice etc ? > > But, > > It seems to correspond to me when I did switch to simpleusb this > year so I would say try it with usbradio if you have the > additional headroom. > > Perhaps I will switch back as well. It's worth noting and trying. > > ...mike/kb8jnm > > On 11/18/2018 11:11 AM, Ed Wilhelm wrote: >> Been running SimleUSB on my repeater for sometime. All works well >> except for the variable audio delay, sometimes will hear the end >> of my own transmission. Know this issue has been around for >> awile. Someone said try USBRadio, but would think that would use >> even more processing and agrevate the situation. >> This is running latest version of ASL on a Raspberry Pi2. >> Any input appreciated. >> >> Ed W8VT >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From vacuumtubesforever at gmail.com Mon Nov 19 12:26:46 2018 From: vacuumtubesforever at gmail.com (Ed Wilhelm) Date: Mon, 19 Nov 2018 07:26:46 -0500 Subject: [App_rpt-users] Audio Delay During Duplex SimpleUSB In-Reply-To: <722e091d-a360-7ed2-24b7-d14744e21649@midnighteng.com> References: <722e091d-a360-7ed2-24b7-d14744e21649@midnighteng.com> Message-ID: When I stop and think about it, have never heard myself while using iaxrpt. It doesn't really bother me, but is seems to bug some people a lot, so was looking for a fix. I'll give the USB Radio a try. Got to admit it may? be awhile. Too lazy to drag service monitor to repeater and re-diddle levels LOL. Ed W8VT On 11/18/2018 9:13 PM, Mike wrote: > > Well, > > I never hear myself 'after I unkey' if using iaxrpt on a dahdi node. > Including on a Pi3 > > But using? one of the radio nodes (with a radio) that use simpleusb on > the same server does create that effect. > > Perhaps it is not a proper observation for compare since a direct iax > stream is not exactly the same handling/buffering. > > ...mike/kb8jnm > > On 11/18/2018 8:00 PM, Tim Sawyer wrote: >> Mike, >> >> The variable audio delay happens with RTCM's too. >> >> Are you running full duplex DAHDI to a device some how? I don't >> understand how you know that this never?happens with the DAHDI driver. >> >> On Sun, Nov 18, 2018 at 8:30 AM Mike > > wrote: >> >> Ed, ya know I have had the same issue and never had time to fully >> investigate it. Was never a major issue for me, just a annoyance. >> >> It seems to vary in it's delay and I was looking for other >> processes in memory slowing it down and found nothing and always >> has plenty of cpu and ram. >> >> Nodes with dahdi driver are never a issue on the same server. >> >> Could be some interference with cpu time-slice etc ? >> >> But, >> >> It seems to correspond to me when I did switch to simpleusb this >> year so I would say try it with usbradio if you have the >> additional headroom. >> >> Perhaps I will switch back as well. It's worth noting and trying. >> >> ...mike/kb8jnm >> >> On 11/18/2018 11:11 AM, Ed Wilhelm wrote: >>> Been running SimleUSB on my repeater for sometime. All works >>> well except for the variable audio delay, sometimes will hear >>> the end of my own transmission. Know this issue has been around >>> for awile. Someone said try USBRadio, but would think that would >>> use even more processing and agrevate the situation. >>> This is running latest version of ASL on a Raspberry Pi2. >>> Any input appreciated. >>> >>> Ed W8VT >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email >> address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via >> email confirmation. If you have trouble unsubscribing, please >> send a message to the list detailing the problem. >> >> >> >> -- >> Tim WD6AWP >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Mon Nov 19 13:29:08 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Mon, 19 Nov 2018 08:29:08 -0500 Subject: [App_rpt-users] Node Resistration Message-ID: HI Bryan etc al, Can someone check the registration of my nodes. I swapped out routers last night (the old one bit the dust) and I can connect to some nodes and not others....I am 99% sure that I have the ports forwarded properly so I am not sure what is going on. 47124 and 47194 are my node numbers. Thanks much! Jeff -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From flatpossum1231 at yahoo.com Mon Nov 19 13:36:08 2018 From: flatpossum1231 at yahoo.com (Mr. Possum (Bill)) Date: Mon, 19 Nov 2018 13:36:08 +0000 (UTC) Subject: [App_rpt-users] Node Resistration In-Reply-To: References: Message-ID: <1427478093.2767222.1542634568059@mail.yahoo.com> I connected up to both nodes from my 46682 hub, no problem... Bill - N5MBM From: Jeff Lehman To: app_rpt-users at lists.allstarlink.org Sent: Monday, November 19, 2018 7:29 AM Subject: [App_rpt-users] Node Resistration HI Bryan etc al,? ? ?Can someone check the registration of my nodes. I swapped out routers last night (the old one bit the dust) and I can connect to some nodes and not others....I am 99% sure that I have the ports forwarded properly so I am not sure what is going on. 47124 and 47194 are my node numbers. Thanks much!? Jeff-- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net_______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Mon Nov 19 14:17:36 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Mon, 19 Nov 2018 09:17:36 -0500 Subject: [App_rpt-users] Node Resistration In-Reply-To: <1427478093.2767222.1542634568059@mail.yahoo.com> References: <1427478093.2767222.1542634568059@mail.yahoo.com> Message-ID: Never Mind. I found it. Thanks everyone! Jeff On Mon, Nov 19, 2018 at 8:36 AM Mr. Possum (Bill) wrote: > I connected up to both nodes from my 46682 hub, no problem... > > Bill - N5MBM > > > ------------------------------ > *From:* Jeff Lehman > *To:* app_rpt-users at lists.allstarlink.org > *Sent:* Monday, November 19, 2018 7:29 AM > *Subject:* [App_rpt-users] Node Resistration > > HI Bryan etc al, > Can someone check the registration of my nodes. I swapped out routers > last night (the old one bit the dust) and I can connect to some nodes and > not others....I am 99% sure that I have the ports forwarded properly so I > am not sure what is going on. > > 47124 and 47194 are my node numbers. > > Thanks much! > > Jeff > -- > Jeff Lehman, KC8QCH > E-mail: kc8qch at gmail.com > http://kc8qch.dx.am > Hamshack Hotline: 4218 > > Webmaster > Hamilton County ARPSC > http://www.hamcoarpsc.org > E-mail: hamcoarpsc at gmail.com > Phone: 513-452-6480 > > Allstar 47374 Administrator > Project Manager, HHUL > World Wide Amateur Radio Guild > http://www.theguildglobal.org > E-Mail: kc8qch at theguildglobal.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address and > press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From tom at k5tra.net Mon Nov 19 16:14:26 2018 From: tom at k5tra.net (Tom) Date: Mon, 19 Nov 2018 10:14:26 -0600 Subject: [App_rpt-users] asl source code Message-ID: <003f01d48022$f31637f0$d942a7d0$@k5tra.net> I just setup an ASL image for the Stretch distro. I have been running DIAL for some time with good results. I delayed making this upgrade because I have quite a few of my own tweaks and tools installed. It has been easier to just clone my image for new nodes. Part of what I've been doing requires edits to app_rpt.c and recompiling. This has always been easy to do through the from the earlier CentOS through the DIAL releases. When I looked for the directory with source code, I was surprised to not find it. Is there a detailed "how to" documented step by step procedure posted somewhere on installing source and make/recompile files? I don't want to break what I now have working with the new ASL. Thanks, Tom / K5TRA -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Mon Nov 19 16:27:57 2018 From: mm at midnighteng.com (Mike) Date: Mon, 19 Nov 2018 11:27:57 -0500 Subject: [App_rpt-users] Audio Delay During Duplex SimpleUSB In-Reply-To: References: <722e091d-a360-7ed2-24b7-d14744e21649@midnighteng.com> Message-ID: <045ecc45-ece1-c360-8a9c-0d1cc2d9db12@midnighteng.com> Yes, I would just call it a annoyance. But sometimes it breaks my train of thought in a conversation. especially when it gets near 2 seconds. That's what is aggravating for me and all the users are quick to say something about it. It's not hurting anything. Let me know what you find. I may look at it closer over the holiday & weekend. ...mike/kb8jnm On 11/19/2018 7:26 AM, Ed Wilhelm wrote: > When I stop and think about it, have never heard myself while using iaxrpt. > > It doesn't really bother me, but is seems to bug some people a lot, so > was looking for a fix. > > I'll give the USB Radio a try. Got to admit it may? be awhile. Too lazy > to drag service monitor to repeater and re-diddle levels LOL. > > Ed W8VT > > On 11/18/2018 9:13 PM, Mike wrote: >> >> Well, >> >> I never hear myself 'after I unkey' if using iaxrpt on a dahdi node. >> Including on a Pi3 >> >> But using? one of the radio nodes (with a radio) that use simpleusb on >> the same server does create that effect. >> >> Perhaps it is not a proper observation for compare since a direct iax >> stream is not exactly the same handling/buffering. >> >> ...mike/kb8jnm >> >> On 11/18/2018 8:00 PM, Tim Sawyer wrote: >>> Mike, >>> >>> The variable audio delay happens with RTCM's too. >>> >>> Are you running full duplex DAHDI to a device some how? I don't >>> understand how you know that this never?happens with the DAHDI driver. >>> >>> On Sun, Nov 18, 2018 at 8:30 AM Mike >> > wrote: >>> >>> ??? Ed, ya know I have had the same issue and never had time to fully >>> ??? investigate it. Was never a major issue for me, just a annoyance. >>> >>> ??? It seems to vary in it's delay and I was looking for other >>> ??? processes in memory slowing it down and found nothing and always >>> ??? has plenty of cpu and ram. >>> >>> ??? Nodes with dahdi driver are never a issue on the same server. >>> >>> ??? Could be some interference with cpu time-slice etc ? >>> >>> ??? But, >>> >>> ??? It seems to correspond to me when I did switch to simpleusb this >>> ??? year so I would say try it with usbradio if you have the >>> ??? additional headroom. >>> >>> ??? Perhaps I will switch back as well. It's worth noting and trying. >>> >>> ??? ...mike/kb8jnm >>> >>> ??? On 11/18/2018 11:11 AM, Ed Wilhelm wrote: >>>> ??? Been running SimleUSB on my repeater for sometime. All works >>>> ??? well except for the variable audio delay, sometimes will hear >>>> ??? the end of my own transmission. Know this issue has been around >>>> ??? for awile. Someone said try USBRadio, but would think that would >>>> ??? use even more processing and agrevate the situation. >>>> ??? This is running latest version of ASL on a Raspberry Pi2. >>>> ??? Any input appreciated. >>>> >>>> ??? Ed W8VT >>>> >>>> ??? _______________________________________________ >>>> ??? App_rpt-users mailing list >>>> ??? App_rpt-users at lists.allstarlink.org >>>> >>>> ??? http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> ??? To unsubscribe from this list please >>>> visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> and scroll down to the bottom of the page. Enter your email address >>>> and press the "Unsubscribe or edit options button" >>>> ??? You do not need a password to unsubscribe, you can do it via >>>> email confirmation. If you have trouble unsubscribing, please send a >>>> message to the list detailing the problem. >>> ??? _______________________________________________ >>> ??? App_rpt-users mailing list >>> ??? App_rpt-users at lists.allstarlink.org >>> ??? >>> ??? http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> ??? To unsubscribe from this list please visit >>> ??? http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> ??? and scroll down to the bottom of the page. Enter your email >>> ??? address and press the "Unsubscribe or edit options button" >>> ??? You do not need a password to unsubscribe, you can do it via >>> ??? email confirmation. If you have trouble unsubscribing, please >>> ??? send a message to the list detailing the problem. >>> >>> >>> >>> -- >>> Tim WD6AWP >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please >>> visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and scroll down to the bottom of the page. Enter your email address >>> and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email address >> and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message >> to the list detailing the problem. > > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > From tisawyer at gmail.com Mon Nov 19 19:10:13 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Mon, 19 Nov 2018 11:10:13 -0800 Subject: [App_rpt-users] asl source code In-Reply-To: <003f01d48022$f31637f0$d942a7d0$@k5tra.net> References: <003f01d48022$f31637f0$d942a7d0$@k5tra.net> Message-ID: Tom, The source for ASL 1.01 is here https://github.com/allstarlink Clone it and checkout the development branch. On Mon, Nov 19, 2018 at 8:14 AM Tom wrote: > I just setup an ASL image for the Stretch distro. I have been running > DIAL for some time with good results. I delayed making this upgrade > because I have quite a few of my own tweaks and tools installed. It has > been easier to just clone my image for new nodes. Part of what I?ve been > doing requires edits to app_rpt.c and recompiling. This has always been > easy to do through the from the earlier CentOS through the DIAL releases. When > I looked for the directory with source code, I was surprised to not find > it. Is there a detailed ?how to? documented step by step procedure posted > somewhere on installing source and make/recompile files? I don?t want to > break what I now have working with the new ASL. > > Thanks, > > Tom / K5TRA > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Tue Nov 20 02:16:01 2018 From: mark at metcom.com (Mark DuMoulin) Date: Tue, 20 Nov 2018 02:16:01 +0000 Subject: [App_rpt-users] Votermon Message-ID: <7272f4a473c843618268dba8c1cf3c29@metcom.com> Tim, Thanks for that but I'm running allmon2. Its been great since you brought it out. I seem to recall something like Votmon. This app provided receive audio of the voted station. If Allmon2 does this I am unaware as to how. Tnx, Mark WB2ERS -------------- next part -------------- An HTML attachment was scrubbed... URL: From rpt2 at chuck.midlandsnetworking.com Tue Nov 20 04:27:11 2018 From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson) Date: Mon, 19 Nov 2018 22:27:11 -0600 Subject: [App_rpt-users] Votermon In-Reply-To: <7272f4a473c843618268dba8c1cf3c29@metcom.com> References: <7272f4a473c843618268dba8c1cf3c29@metcom.com> Message-ID: The votermon files are here: https://github.com/AllStarLink/voter/ I don't know where the documentation is. I used to have it all working on my site, but at some point I forgot about it and after several other upgrades I found that it was not working. I don't remember what I did long ago to get it working then. My old page that once worked, but apparently not any more, is at http://www.midlandsnetworking.com/VoterMon.htm Let me know if you figure it out. On Mon, Nov 19, 2018 at 8:16 PM Mark DuMoulin wrote: > Tim, > > > > Thanks for that but I?m running allmon2. > > Its been great since you brought it out. > > > > I seem to recall something like Votmon. > > This app provided receive audio of the voted station. > > > > If Allmon2 does this I am unaware as to how. > > > > Tnx, > > > > Mark > > WB2ERS > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Tue Nov 20 16:00:41 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Tue, 20 Nov 2018 08:00:41 -0800 Subject: [App_rpt-users] Votermon In-Reply-To: References: <7272f4a473c843618268dba8c1cf3c29@metcom.com> Message-ID: Hmmm, I don't remember a listen app. That would be handy. There is a stream parameter documented here https://wiki.allstarlink.org/wiki/Voter.conf Maybe that is supposed to work with the applets Chuck mentioned. On Mon, Nov 19, 2018 at 8:27 PM Chuck Henderson < rpt2 at chuck.midlandsnetworking.com> wrote: > The votermon files are here: https://github.com/AllStarLink/voter/ I > don't know where the documentation is. I used to have it all working on my > site, but at some point I forgot about it and after several other upgrades > I found that it was not working. I don't remember what I did long ago to > get it working then. My old page that once worked, but apparently not any > more, is at http://www.midlandsnetworking.com/VoterMon.htm > > Let me know if you figure it out. > > > > > On Mon, Nov 19, 2018 at 8:16 PM Mark DuMoulin wrote: > >> Tim, >> >> >> >> Thanks for that but I?m running allmon2. >> >> Its been great since you brought it out. >> >> >> >> I seem to recall something like Votmon. >> >> This app provided receive audio of the voted station. >> >> >> >> If Allmon2 does this I am unaware as to how. >> >> >> >> Tnx, >> >> >> >> Mark >> >> WB2ERS >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Tue Nov 20 20:24:13 2018 From: mark at metcom.com (Mark DuMoulin) Date: Tue, 20 Nov 2018 20:24:13 +0000 Subject: [App_rpt-users] Votermon In-Reply-To: References: <7272f4a473c843618268dba8c1cf3c29@metcom.com> , Message-ID: <761DCDF8-EC7A-4CEE-8C3F-1B778534A7CF@metcom.com> Chuck, Thanks. I?ll give it a try. I remember it was fussy on the particular Java being used. I want this for our new website. Tnx Mark DuMoulin Sr. WB2ERS On Nov 20, 2018, at 11:06, Tim Sawyer > wrote: Hmmm, I don't remember a listen app. That would be handy. There is a stream parameter documented here https://wiki.allstarlink.org/wiki/Voter.conf Maybe that is supposed to work with the applets Chuck mentioned. On Mon, Nov 19, 2018 at 8:27 PM Chuck Henderson > wrote: The votermon files are here: https://github.com/AllStarLink/voter/ I don't know where the documentation is. I used to have it all working on my site, but at some point I forgot about it and after several other upgrades I found that it was not working. I don't remember what I did long ago to get it working then. My old page that once worked, but apparently not any more, is at http://www.midlandsnetworking.com/VoterMon.htm Let me know if you figure it out. On Mon, Nov 19, 2018 at 8:16 PM Mark DuMoulin > wrote: Tim, Thanks for that but I?m running allmon2. Its been great since you brought it out. I seem to recall something like Votmon. This app provided receive audio of the voted station. If Allmon2 does this I am unaware as to how. Tnx, Mark WB2ERS _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jerutley at gmail.com Thu Nov 22 01:20:37 2018 From: jerutley at gmail.com (jerutley at gmail.com) Date: Wed, 21 Nov 2018 19:20:37 -0600 Subject: [App_rpt-users] Audio Delay on Xmit with new repeater build Message-ID: <009e01d48201$93e47c70$bbad7550$@gmail.com> Hello list! I've been working on building our new repeater using AllStar on a Pi-3 as the controller, URI-X as the audio interface, and a pair of CDM-1250's as XMit and receive radios. At first, when I set everything up, all was working wonderfully. But now, after being up a couple of days, I'm hearing a delay in the transmit - I key up, announce my callsign, unkey, and I actually hear the last bit of my transmit audio as an "echo". Doing some research thru the mailing list, it seems to indicate this *might* be the system being a little underpowered - is this a regular occurrence with a Pi in duplex mode? Would upgrading to something more powerful help? Been looking at something like the Qotom or Protectl small form factor PCs - but I'm a little concerned about they would hold up in the heat. Our building at the tower site does not have any cooling in it, and it can get rather warm during the summertime. Another question - can the AllStar version of Asterisk directly play MP3-formatted audio? I'm considering some functions using Amazon's Polly Text-to-Speech service, which provides MP3 files, so I'm wondering if Asterisk could play them directly, or if I'd have to use sox to convert them to another format first. Thanks! Jeremy, NQ0M -------------- next part -------------- An HTML attachment was scrubbed... URL: From n7ipb at wetnet.net Thu Nov 22 02:27:37 2018 From: n7ipb at wetnet.net (Ken Koster) Date: Wed, 21 Nov 2018 18:27:37 -0800 Subject: [App_rpt-users] Audio Delay on Xmit with new repeater build In-Reply-To: <009e01d48201$93e47c70$bbad7550$@gmail.com> References: <009e01d48201$93e47c70$bbad7550$@gmail.com> Message-ID: <1656769.Cr74POJq5Y@algedi> On Wednesday, November 21, 2018 5:20:37 PM PST jerutley at gmail.com wrote: > Hello list! > ... > > Another question - can the AllStar version of Asterisk directly play > MP3-formatted audio? I'm considering some functions using Amazon's Polly > Text-to-Speech service, which provides MP3 files, so I'm wondering if > Asterisk could play them directly, or if I'd have to use sox to convert them > to another format first. Use 'sox' to convert mp3's to a format you can use. sudo apt-get install sox /libsox/-fmt-/mp3/ For example you can use 'sox xxx.mp3 xxx.wav' to convert from mp3 to wav. Sox supports almost 100 different sound file formats as well as a large number of special effects. ... -- Ken - N7IPB Email: n7ipb at wetnet.net JID: n7ipb at jabber.wetnet.net SvxLink Repeaters: http://pnw220.wetnet.net PGP Sig: F42B EF90 3CD3 31C7 3056 122E 993A 7B2E 5138 C42A ?Contrariwise,' continued Tweedledee, 'if it was so, it might be; and if it were so, it would be; but as it isn't, it ain't. That's logic.? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: This is a digitally signed message part. URL: From kg7qin at arrl.net Thu Nov 22 08:29:24 2018 From: kg7qin at arrl.net (Stacy) Date: Thu, 22 Nov 2018 00:29:24 -0800 Subject: [App_rpt-users] asl source code In-Reply-To: References: <003f01d48022$f31637f0$d942a7d0$@k5tra.net> Message-ID: On 11/19/18 11:10 AM, Tim Sawyer wrote: > Tom, > > The source for ASL 1.01 is here?https://github.com/allstarlink > > Clone it and checkout the development branch.? > > The Github repo has been updated with develop merged into master. You only need to clone the repo now and compile the master branch.? There is no longer a need to checkout the develop branch to get the ASL 1.01 release code. -Stacy KG7QIN -------------- next part -------------- An HTML attachment was scrubbed... URL: From ars.w5omr at gmail.com Thu Nov 22 11:39:20 2018 From: ars.w5omr at gmail.com (ARS W5OMR) Date: Thu, 22 Nov 2018 05:39:20 -0600 Subject: [App_rpt-users] Audio Delay on Xmit with new repeater build In-Reply-To: <1656769.Cr74POJq5Y@algedi> References: <009e01d48201$93e47c70$bbad7550$@gmail.com> <1656769.Cr74POJq5Y@algedi> Message-ID: As far as the little bit of audio delay you hear... every system I've been on, or put together has that delay. Some people are quick to unkey the mic, while others wait about a second to unkey, after they are done talking. Just take into consideration the time you gotta key up, before you're heard (pl tone decode on the rotr, dcs, whatever) and add that to your unkey process and you'll never hear the repeated audio again. If you want to hear the 'digital delay', turn on another radio and listen to the local repeater while you talk into it. On Wed, Nov 21, 2018, 20:28 Ken Koster On Wednesday, November 21, 2018 5:20:37 PM PST jerutley at gmail.com wrote: > > > Hello list! > > > > > ... > > > > > > > > Another question - can the AllStar version of Asterisk directly play > > > MP3-formatted audio? I'm considering some functions using Amazon's Polly > > > Text-to-Speech service, which provides MP3 files, so I'm wondering if > > > Asterisk could play them directly, or if I'd have to use sox to convert > them > > > to another format first. > > > > Use 'sox' to convert mp3's to a format you can use. > > sudo apt-get install sox libsox-fmt-mp3 > > > > For example you can use 'sox xxx.mp3 xxx.wav' to convert from mp3 to wav. > > Sox supports almost 100 different sound file formats as well as a large > number of special effects. > > ... > > -- > > Ken - N7IPB > > Email: n7ipb at wetnet.net > > JID: n7ipb at jabber.wetnet.net > > SvxLink Repeaters: http://pnw220.wetnet.net > > PGP Sig: F42B EF90 3CD3 31C7 3056 122E 993A 7B2E 5138 C42A > > ?Contrariwise,' continued Tweedledee, 'if it was so, it might be; > > and if it were so, it would be; but as it isn't, it ain't. That's logic.? > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kg7qin at arrl.net Thu Nov 22 18:07:10 2018 From: kg7qin at arrl.net (Stacy) Date: Thu, 22 Nov 2018 10:07:10 -0800 Subject: [App_rpt-users] ASL 1.01 Source Code Message-ID: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> All, Last night I merged the develop branch into master on the AllStarLink Github repo and updated the README to README.md to be a little more descriptive. Today I created a release tag of ASL-1.01 to make downloading the ASL 1.01 source easier without using git. You can find the ASL-1.01 release at: https://github.com/AllStarLink/Asterisk/releases 73 Stacy KG7QIN From kb4fxc at inttek.net Thu Nov 22 18:28:31 2018 From: kb4fxc at inttek.net (David McGough) Date: Thu, 22 Nov 2018 13:28:31 -0500 (EST) Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> Message-ID: Hi Stacy, What does this commit to xmpr.c fix? https://github.com/AllStarLink/Asterisk/commit/0a633dff1ae64393eaaa5477fbf569c3076525a9#diff-a57002487286badb3c373351f1f7ea10 73, David KB4FXC On Thu, 22 Nov 2018, Stacy wrote: > All, > Last night I merged the develop branch into master on the AllStarLink > Github repo and updated the README to README.md to be a little more > descriptive. > > Today I created a release tag of ASL-1.01 to make downloading the ASL > 1.01 source easier without using git. > > You can find the ASL-1.01 release at: > > https://github.com/AllStarLink/Asterisk/releases > > 73 > Stacy > KG7QIN > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > From jason at mfamily.org Fri Nov 23 02:08:50 2018 From: jason at mfamily.org (Jason McCormick) Date: Fri, 23 Nov 2018 02:08:50 +0000 Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> References: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> Message-ID: Is there work going on to move app_rpt to a modern LTS version of Asterisk? It looks from this repo that Allstar is still based on Asterisk 1.4 (released 2006) which lost upstream fixes (including security) back in 2012. Thanks, Jason N8JDM -----Original Message----- From: App_rpt-users On Behalf Of Stacy Sent: Thursday, November 22, 2018 1:07 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] ASL 1.01 Source Code All, Last night I merged the develop branch into master on the AllStarLink Github repo and updated the README to README.md to be a little more descriptive. Today I created a release tag of ASL-1.01 to make downloading the ASL 1.01 source easier without using git. You can find the ASL-1.01 release at: https://github.com/AllStarLink/Asterisk/releases 73 Stacy KG7QIN _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From cummingsj at gmail.com Fri Nov 23 02:56:41 2018 From: cummingsj at gmail.com (JJC) Date: Thu, 22 Nov 2018 19:56:41 -0700 Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: References: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> Message-ID: <299A7A6E-921D-4B65-B616-D4703C184175@gmail.com> There is absolutely work taking place to get to current for asterisk. Sent from the iRoad > On Nov 22, 2018, at 19:08, Jason McCormick wrote: > > Is there work going on to move app_rpt to a modern LTS version of Asterisk? It looks from this repo that Allstar is still based on Asterisk 1.4 (released 2006) which lost upstream fixes (including security) back in 2012. > > Thanks, > Jason N8JDM > > -----Original Message----- > From: App_rpt-users On Behalf Of Stacy > Sent: Thursday, November 22, 2018 1:07 PM > To: Users of Asterisk app_rpt > Subject: [App_rpt-users] ASL 1.01 Source Code > > All, > Last night I merged the develop branch into master on the AllStarLink Github repo and updated the README to README.md to be a little more descriptive. > > Today I created a release tag of ASL-1.01 to make downloading the ASL > 1.01 source easier without using git. > > You can find the ASL-1.01 release at: > > https://github.com/AllStarLink/Asterisk/releases > > 73 > Stacy > KG7QIN > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From jason at mfamily.org Fri Nov 23 03:09:42 2018 From: jason at mfamily.org (Jason McCormick) Date: Fri, 23 Nov 2018 03:09:42 +0000 Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: <299A7A6E-921D-4B65-B616-D4703C184175@gmail.com> References: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> , <299A7A6E-921D-4B65-B616-D4703C184175@gmail.com> Message-ID: <01DD90CE-D5EC-4A4F-9A43-044A46FD9DA0@mfamily.org> Is that work on a devel list or some got repo? I would be interesting in maybe helping out a little. > On Nov 22, 2018, at 9:56 PM, JJC wrote: > > There is absolutely work taking place to get to current for asterisk. > > Sent from the iRoad > >> On Nov 22, 2018, at 19:08, Jason McCormick wrote: >> >> Is there work going on to move app_rpt to a modern LTS version of Asterisk? It looks from this repo that Allstar is still based on Asterisk 1.4 (released 2006) which lost upstream fixes (including security) back in 2012. >> >> Thanks, >> Jason N8JDM >> >> -----Original Message----- >> From: App_rpt-users On Behalf Of Stacy >> Sent: Thursday, November 22, 2018 1:07 PM >> To: Users of Asterisk app_rpt >> Subject: [App_rpt-users] ASL 1.01 Source Code >> >> All, >> Last night I merged the develop branch into master on the AllStarLink Github repo and updated the README to README.md to be a little more descriptive. >> >> Today I created a release tag of ASL-1.01 to make downloading the ASL >> 1.01 source easier without using git. >> >> You can find the ASL-1.01 release at: >> >> https://github.com/AllStarLink/Asterisk/releases >> >> 73 >> Stacy >> KG7QIN >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From kg7qin at arrl.net Fri Nov 23 06:53:27 2018 From: kg7qin at arrl.net (Stacy) Date: Thu, 22 Nov 2018 22:53:27 -0800 Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: References: Message-ID: On 11/22/18 10:28 AM, David McGough wrote: > Hi Stacy, > > What does this commit to xmpr.c fix? > > > https://github.com/AllStarLink/Asterisk/commit/0a633dff1ae64393eaaa5477fbf569c3076525a9#diff-a57002487286badb3c373351f1f7ea10 > > > 73, David KB4FXC > Good question.? Steve Zingman was the one who merged in that change back before the ASL 1.01 release.? Reading the code and comments, my guess it has something to do with echolink node numbers. -Stacy KG7QIN From kg7qin at arrl.net Fri Nov 23 07:10:55 2018 From: kg7qin at arrl.net (Stacy) Date: Thu, 22 Nov 2018 23:10:55 -0800 Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: <01DD90CE-D5EC-4A4F-9A43-044A46FD9DA0@mfamily.org> References: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> <299A7A6E-921D-4B65-B616-D4703C184175@gmail.com> <01DD90CE-D5EC-4A4F-9A43-044A46FD9DA0@mfamily.org> Message-ID: <8e355ed4-b92e-d9f3-cb95-2bd822b42a0b@arrl.net> On 11/22/18 7:09 PM, Jason McCormick wrote: > Is that work on a devel list or some got repo? I would be interesting in maybe helping out a little. > > There is a -dev mailing list.? As of today subscribers are being accepted to it. They still require approval, but that is mostly to ensure that it isn't getting flooded by people trying to use it for tech support. You can subscribe here: http://lists.allstarlink.org/cgi-bin/mailman/listinfo/allstar-dev Note: the -dev mailing list is not for support of the app_rpt suite of programs.? It is for discussions on development only. -Stacy KG7QIN From todd at nccom.com Fri Nov 23 17:41:05 2018 From: todd at nccom.com (Todd Lesser) Date: Fri, 23 Nov 2018 09:41:05 -0800 Subject: [App_rpt-users] Non-profit status Message-ID: <859305BB-755B-4D5A-8DEE-A841B39F58B8@nccom.com> Many people have been asking about our non-profit status. They would like to make contributions by the end of the year since their employers have matching funds. I wanted to let you all know that Allstarlink, Inc. is a Florida non-profit corporation. Earlier this week we filed for 5013c status with the IRS. We expect to receive our approval within 30 days. Once we have the approval letter from the IRS, I will let everyone know. From ve6ars at gmail.com Fri Nov 23 18:35:11 2018 From: ve6ars at gmail.com (ve6ars R Dahl) Date: Fri, 23 Nov 2018 11:35:11 -0700 Subject: [App_rpt-users] status of urix gpio outputs Message-ID: I am channel steering 31 channels of a modified gm300 via the following snippets of simpleusb.conf and rpt.conf It all works well but I would like to be able to query the server as I have to go by my own memory of what channel I left it on. Ideally, then I could put the status on a webpage to display the channel number. In the meantime we have a camera looking at the radio for verification. Anybody know how to do this? Ross ve6ars ########### simpleusb.conf snippet [usb] ; defaults to channel 1 gpio1=out0 gpio2=out1 gpio4=out1 gpio5=out1 gpio6=out1 ########## snippet of rpt.conf [functions] ;freq agile remote channel steering setup 6011=cop,61,GPIO1=0 6021=cop,61,GPIO2=0 6031=cop,61,GPIO4=0 6041=cop,61,GPIO5=0 6051=cop,61,GPIO6=0 6012=cop,61,GPIO1=1 6022=cop,61,GPIO2=1 6032=cop,61,GPIO4=1 6042=cop,61,GPIO5=1 6052=cop,61,GPIO6=1 [macro] ; ****************** Freq agile remote macros ************* 501=*6011*6022*6032*6042*6052# ; channel 1 502=*6012*6021*6032*6042*6052# ; channel 2 503=*6011*6021*6032*6042*6052# ; channel 3 504=*6012*6022*6031*6042*6052# ; channel 4 505=*6011*6022*6031*6042*6052# ; channel 5 506=*6012*6021*6031*6042*6052# ; channel 6 507=*6011*6021*6031*6042*6052# ; channel 7 508=*6012*6022*6032*6041*6052# ; channel 8 509=*6011*6022*6032*6041*6052# ; channel 9 510=*6012*6021*6032*6041*6052# ; channel 10 511=*6011*6021*6032*6041*6052# ; channel 11 512=*6012*6022*6031*6041*6052# ; channel 12 513=*6011*6022*6031*6041*6052# ; channel 13 514=*6012*6021*6031*6041*6052# ; channel 14 515=*6011*6021*6031*6041*6052# ; channel 15 516=*6012*6022*6032*6042*6051# ; channel 16 517=*6011*6022*6032*6042*6051# ; channel 17 518=*6012*6021*6032*6042*6051# ; channel 18 519=*6011*6021*6032*6042*6051# ; channel 19 520=*6012*6022*6031*6042*6051# ; channel 20 521=*6011*6022*6031*6042*6051# ; channel 21 522=*6012*6021*6031*6042*6051# ; channel 22 523=*6011*6021*6031*6042*6051# ; channel 23 524=*6012*6022*6032*6041*6051# ; channel 24 525=*6011*6022*6032*6041*6051# ; channel 25 526=*6012*6021*6032*6041*6051# ; channel 26 527=*6011*6021*6032*6041*6051# ; channel 27 528=*6012*6022*6031*6041*6051# ; channel 28 529=*6011*6022*6031*6041*6051# ; channel 29 530=*6012*6021*6031*6041*6051# ; channel 30 531=*6011*6021*6031*6041*6051# ; channel 31 -------------- next part -------------- An HTML attachment was scrubbed... URL: From no1pc at yahoo.com Fri Nov 23 19:42:00 2018 From: no1pc at yahoo.com (Jim Aspinwall No1PC) Date: Fri, 23 Nov 2018 19:42:00 +0000 (UTC) Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub References: <1240811980.1772516.1543002120077.ref@mail.yahoo.com> Message-ID: <1240811980.1772516.1543002120077@mail.yahoo.com> I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration. Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!! Then, connect the repeater node to the hub so it can be linked to the other sites.? Connects as before, not unexpected. Great. What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course.? Sounds like an undesired configuration... However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd.? ? Is this a hang-time thing?? ?Am I missing something?? Expected behavior - don't try this at home? -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Fri Nov 23 20:01:00 2018 From: mm at midnighteng.com (Mike) Date: Fri, 23 Nov 2018 15:01:00 -0500 Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: <1240811980.1772516.1543002120077@mail.yahoo.com> References: <1240811980.1772516.1543002120077.ref@mail.yahoo.com> <1240811980.1772516.1543002120077@mail.yahoo.com> Message-ID: Jim, I may be confused here so hang with me... My understanding... Yes, your hub is full duplex. Your repeater should be full duplex as well. You should not be getting anything 'back from' the hub that is generated at the repeater. It Should output from the repeater only. Anything originating or broadcasting to the hub would be shared with a link from the hub to the repeater except if it comes from the repeater. So if I understand, perhaps the duplex mode of the actual uri ? duplex = 1 ; Duplex / 0 - half duplex / 1 - full duplex As I said, I may not understand the exact issue. If nobody else gives any better guidance, perhaps just re-phrase the issue without the history of it. ...mike/kb8jnm On 11/23/2018 2:42 PM, Jim Aspinwall No1PC wrote: > I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration. > > Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!! > > Then, connect the repeater node to the hub so it can be linked to the other sites.? Connects as before, not unexpected. Great. > > What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course.? Sounds like an undesired configuration... > > However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd. > > Is this a hang-time thing?? ?Am I missing something?? Expected behavior - don't try this at home? > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > From kb4fxc at inttek.net Fri Nov 23 21:00:48 2018 From: kb4fxc at inttek.net (David McGough) Date: Fri, 23 Nov 2018 16:00:48 -0500 (EST) Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: <1240811980.1772516.1543002120077@mail.yahoo.com> Message-ID: Perhaps try duplex=3 .....Works just like duplex=2, but audio isn't repeated. On Fri, 23 Nov 2018, Jim Aspinwall No1PC wrote: > I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration. > > Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!! > > Then, connect the repeater node to the hub so it can be linked to the other sites.?? Connects as before, not unexpected. Great. > > What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course.?? Sounds like an undesired configuration... > > However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd.?? ?? > > Is this a hang-time thing??? ??Am I missing something??? Expected behavior - don't try this at home? > > From n7ipb at wetnet.net Fri Nov 23 21:00:50 2018 From: n7ipb at wetnet.net (Ken Koster) Date: Fri, 23 Nov 2018 13:00:50 -0800 Subject: [App_rpt-users] ASL 1.01 Source Code In-Reply-To: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> References: <1a5ccacc-d569-eea0-817c-7a3cec6ce6b5@arrl.net> Message-ID: <9587014.KDYEz6vUqj@algedi> On Thursday, November 22, 2018 10:07:10 AM PST Stacy wrote: > All, > Last night I merged the develop branch into master on the AllStarLink > Github repo and updated the README to README.md to be a little more > descriptive. > > Today I created a release tag of ASL-1.01 to make downloading the ASL > 1.01 source easier without using git. > > You can find the ASL-1.01 release at: > > https://github.com/AllStarLink/Asterisk/releases > > 73 > Stacy > KG7QIN > Thanks Stacy. I successfully compiled on Raspbian Stretch this morning with the kernel locked at the earlier version with OSS support. It would be nice if someone more knowledgeable about Asterisk than I could include a list of needed dev packages. I had to add g++-4.9, libncurses-dev, libusb- dev,libssl-dev and libcrypto++-dev. There are likely others but this was on a system I'd already used for other dev work so I'm sure some packages were already installed. In addition I noticed the config.log file contained lots of attempts to test for packages that were not available but did not stop the build. I have no idea what features may not be available as a result. -- Ken - N7IPB Email: n7ipb at wetnet.net JID: n7ipb at jabber.wetnet.net SvxLink Repeaters: http://pnw220.wetnet.net PGP Sig: F42B EF90 3CD3 31C7 3056 122E 993A 7B2E 5138 C42A ?Contrariwise,' continued Tweedledee, 'if it was so, it might be; and if it were so, it would be; but as it isn't, it ain't. That's logic.? -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 195 bytes Desc: This is a digitally signed message part. URL: From no1pc at yahoo.com Fri Nov 23 21:25:34 2018 From: no1pc at yahoo.com (Jim Aspinwall No1PC) Date: Fri, 23 Nov 2018 21:25:34 +0000 (UTC) Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: References: <1240811980.1772516.1543002120077@mail.yahoo.com> Message-ID: <1883138025.1797525.1543008334774@mail.yahoo.com> Well, sort of good idea, tried that, but going through the duplex hub means we get delayed local repeat, and when you unkey you get to hear a bit of yourself repeated back due to the path and processing delay.?? Thinking this needs local node duplex repeat but half-duplex node-to-node. On Friday, November 23, 2018, 1:00:49 PM PST, David McGough wrote: Perhaps try duplex=3 .....Works just like duplex=2, but audio isn't repeated. On Fri, 23 Nov 2018, Jim Aspinwall No1PC wrote: > I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration. > > Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!! > > Then, connect the repeater node to the hub so it can be linked to the other sites.?? Connects as before, not unexpected. Great. > > What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course.?? Sounds like an undesired configuration... > > However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd.?? ?? > > Is this a hang-time thing??? ??Am I missing something??? Expected behavior - don't try this at home? > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From brett.friermood at gmail.com Fri Nov 23 21:34:39 2018 From: brett.friermood at gmail.com (Brett Friermood) Date: Fri, 23 Nov 2018 15:34:39 -0600 Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: <1240811980.1772516.1543002120077@mail.yahoo.com> References: <1240811980.1772516.1543002120077.ref@mail.yahoo.com> <1240811980.1772516.1543002120077@mail.yahoo.com> Message-ID: Jim, Might just be me but I'm having hard time understanding your setup. Any chance you could provide a drawing or more detailed explanation of what you're trying to do? On Fri, Nov 23, 2018 at 1:42 PM Jim Aspinwall No1PC wrote: > I thought I was going to be ingenious and replace a few RLC multi-port > controllers that each have one of the link ports tied to an AllStar node > that runs in non-duplex, and the node connects to another AllStar hub > (running in duplex) that is used as the 'link' to feed other repeaters in > similar configuration. > > Simply connect the repeater radio to the AllStar interface, re-configure > the node to duplex=2 - tah-dah - repeater!! > > Then, connect the repeater node to the hub so it can be linked to the > other sites. Connects as before, not unexpected. Great. > > What I did not account for is that the hub is running in duplex, so > whatever the repeater sends to it comes back, delayed of course. Sounds > like an undesired configuration... > > However that doesn't seem to account for the fact in the prior > configuration the duplex hub traffic never came back into the half-duplex > node and echo'd. > > Is this a hang-time thing? Am I missing something? Expected behavior - > don't try this at home? > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From kevin.babich at gmail.com Fri Nov 23 22:08:20 2018 From: kevin.babich at gmail.com (Kevin Babich) Date: Fri, 23 Nov 2018 17:08:20 -0500 Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: References: <1240811980.1772516.1543002120077.ref@mail.yahoo.com> <1240811980.1772516.1543002120077@mail.yahoo.com> Message-ID: <4A902D26-6396-418F-9B3B-AEE0690AA9C7@gmail.com> Jim, Try mode 3 Kevin J. Babich 219.406.9707 Mobile ***Mobile EMail*** Please excuse any typos and brevity. > On Nov 23, 2018, at 4:34 PM, Brett Friermood wrote: > > Jim, > > Might just be me but I'm having hard time understanding your setup. Any chance you could provide a drawing or more detailed explanation of what you're trying to do? > >> On Fri, Nov 23, 2018 at 1:42 PM Jim Aspinwall No1PC wrote: >> I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration. >> >> Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!! >> >> Then, connect the repeater node to the hub so it can be linked to the other sites. Connects as before, not unexpected. Great. >> >> What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course. Sounds like an undesired configuration... >> >> However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd. >> >> Is this a hang-time thing? Am I missing something? Expected behavior - don't try this at home? >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ars.w5omr at gmail.com Fri Nov 23 22:44:56 2018 From: ars.w5omr at gmail.com (ARS W5OMR) Date: Fri, 23 Nov 2018 16:44:56 -0600 Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: References: <1240811980.1772516.1543002120077@mail.yahoo.com> Message-ID: On Fri, Nov 23, 2018, 15:00 David McGough > Perhaps try duplex=3 .....Works just like duplex=2, but audio isn't > repeated. > Isn't repeated.. where? Local repeater? Or dowlink? -------------- next part -------------- An HTML attachment was scrubbed... URL: From monty at ke7jvx.com Fri Nov 23 23:57:24 2018 From: monty at ke7jvx.com (Monty) Date: Fri, 23 Nov 2018 16:57:24 -0700 Subject: [App_rpt-users] DTMF Decode Logic Output Message-ID: All, Anyone try to get a logic signal for when DTMF is detected from app_rpt? Without the obvious of using an external decoder ?. I?m looking at a duplex=3 setup, but don?t want the DTMF retransmitted over the air. Maybe in the form of a events management system variable or script? Thanks, Monty -- Monty -------------- next part -------------- An HTML attachment was scrubbed... URL: From no1pc at yahoo.com Sat Nov 24 18:23:22 2018 From: no1pc at yahoo.com (Jim Aspinwall No1PC) Date: Sat, 24 Nov 2018 18:23:22 +0000 (UTC) Subject: [App_rpt-users] AllStar as Repeater Controller Connect to Duplex Hub In-Reply-To: References: Message-ID: <85513684.2038182.1543083802495@mail.yahoo.com> Thanks for all of the responses.?? A bit more tinkering and the 'magic' turns out to be Duplex = 2, linktolink = yes in rpt.conf, and not sure it matters but duplex=1 in simpleusb.conf. Maybe that was obvious in some part of some documentation, but, often head-to-wall interface is part of the solution. Now to get the RA-35 and/or RA-40 and/or the stellar DFM PiHat interface setup for the repeater chassis of interest and make more. ? ?3. AllStar as Repeater Controller Connect to Duplex Hub ? ? ? (Jim Aspinwall No1PC) ? 4. Re: AllStar as Repeater Controller Connect to Duplex Hub (Mike) ? 5. Re: AllStar as Repeater Controller Connect to Duplex Hub ? ? ? (David McGough) ? ?7. Re: AllStar as Repeater Controller Connect to Duplex Hub ? ? ? (Jim Aspinwall No1PC) ? 8. Re: AllStar as Repeater Controller Connect to Duplex Hub ? ? ? (Brett Friermood) ? 9. Re: AllStar as Repeater Controller Connect to Duplex Hub ? ? ? (Kevin Babich) ? 10. Re: AllStar as Repeater Controller Connect to Duplex Hub ? ? ? (ARS W5OMR) -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sat Nov 24 19:12:19 2018 From: mm at midnighteng.com (Mike) Date: Sat, 24 Nov 2018 14:12:19 -0500 Subject: [App_rpt-users] DTMF Decode Logic Output In-Reply-To: References: Message-ID: Perhaps the path to follow may be using tone macro to inhibit the TX. Just a method in thinking anyway. ...mike/kb8jnm On 11/23/2018 6:57 PM, Monty wrote: > All, > > Anyone try to get a logic signal for when DTMF is detected from > app_rpt?? Without the obvious of using an external decoder ?.? I?m > looking at a duplex=3 setup, but don?t want the DTMF retransmitted > over the air. > > Maybe in the form of a events management system variable or script? > > > Thanks, > Monty > -- > > Monty > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sat Nov 24 22:15:17 2018 From: mm at midnighteng.com (Mike) Date: Sat, 24 Nov 2018 17:15:17 -0500 Subject: [App_rpt-users] Brandmeister Password reset Message-ID: I have been unable to log-in a brandmeister for a few months. But at the same time, I am unable to reset the password via email. Goes through the steps but I get no email for the password reset. I am not using spam catcher on my email servers. Any ideas for a next step ? ...mike/kb8jnm From petem001 at gmail.com Sat Nov 24 22:24:37 2018 From: petem001 at gmail.com (Pierre Martel) Date: Sat, 24 Nov 2018 17:24:37 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: References: Message-ID: JUst open a ticket in the support section the brandmeister team will answer to it. usely they are pretty fast. https://support.brandmeister.network Garanti sans virus. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> Le sam. 24 nov. 2018 ? 17:15, Mike a ?crit : > I have been unable to log-in a brandmeister for a few months. > > But at the same time, I am unable to reset the password via email. > > Goes through the steps but I get no email for the password reset. I am > not using spam catcher on my email servers. > > Any ideas for a next step ? > > ...mike/kb8jnm > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sat Nov 24 22:28:52 2018 From: mm at midnighteng.com (Mike) Date: Sat, 24 Nov 2018 17:28:52 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: References: Message-ID: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> That would be great if contacting support did not require a log-in. Thanks anyway! ...mike/kb8jnm On 11/24/2018 5:24 PM, Pierre Martel wrote: > JUst open a ticket in the support section the brandmeister team will > answer to it. usely they are pretty fast. > > https://support.brandmeister.network > > > > Garanti sans virus. www.avast.com > > > > > Le?sam. 24 nov. 2018 ??17:15, Mike > a ?crit?: > > I have been unable to log-in a brandmeister for a few months. > > But at the same time, I am unable to reset the password via email. > > Goes through the steps but I get no email for the password reset. > I am > not using spam catcher on my email servers. > > Any ideas for a next step ? > > ...mike/kb8jnm > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From petem001 at gmail.com Sat Nov 24 23:25:11 2018 From: petem001 at gmail.com (Pierre Martel) Date: Sat, 24 Nov 2018 18:25:11 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> References: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> Message-ID: create a new account. explain your problem and they will fix it. Garanti sans virus. www.avast.com <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> Le sam. 24 nov. 2018 ? 17:28, Mike a ?crit : > That would be great if contacting support did not require a log-in. > > Thanks anyway! > > > ...mike/kb8jnm > On 11/24/2018 5:24 PM, Pierre Martel wrote: > > JUst open a ticket in the support section the brandmeister team will > answer to it. usely they are pretty fast. > > https://support.brandmeister.network > > > > Garanti > sans virus. www.avast.com > > > Le sam. 24 nov. 2018 ? 17:15, Mike a ?crit : > >> I have been unable to log-in a brandmeister for a few months. >> >> But at the same time, I am unable to reset the password via email. >> >> Goes through the steps but I get no email for the password reset. I am >> not using spam catcher on my email servers. >> >> Any ideas for a next step ? >> >> ...mike/kb8jnm >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sat Nov 24 23:35:45 2018 From: mm at midnighteng.com (Mike) Date: Sat, 24 Nov 2018 18:35:45 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: References: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> Message-ID: <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> Sounds like a good idea but user exists by callsign so it will not allow. Wants me to log-in under my user/pass. Or I get a contact api dev team error. ...mike/kb8jnm On 11/24/2018 6:25 PM, Pierre Martel wrote: > create a new account. explain your problem and they will fix it. > > > > Garanti sans virus. www.avast.com > > > > > Le?sam. 24 nov. 2018 ??17:28, Mike > a ?crit?: > > That would be great if contacting support did not require a log-in. > > Thanks anyway! > > > ...mike/kb8jnm > > On 11/24/2018 5:24 PM, Pierre Martel wrote: >> JUst open a ticket in the support section the brandmeister team >> will answer to it. usely they are pretty fast. >> >> https://support.brandmeister.network >> >> >> >> Garanti sans virus. www.avast.com >> >> >> >> >> Le?sam. 24 nov. 2018 ??17:15, Mike > > a ?crit?: >> >> I have been unable to log-in a brandmeister for a few months. >> >> But at the same time, I am unable to reset the password via >> email. >> >> Goes through the steps but I get no email for the password >> reset. I am >> not using spam catcher on my email servers. >> >> Any ideas for a next step ? >> >> ...mike/kb8jnm >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and scroll down to the bottom of the page. Enter your email >> address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via >> email confirmation. If you have trouble unsubscribing, please >> send a message to the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Bryan at bryanfields.net Sat Nov 24 23:52:05 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Sat, 24 Nov 2018 18:52:05 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> References: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> Message-ID: On 11/24/18 6:35 PM, Mike wrote: > Sounds like a good idea but user exists by callsign so it will not allow. > > Wants me to log-in under my user/pass. > > Or I get a contact api dev team error. Guys, can you all hit them up on their list? This list is for AllStar and app_rpt users, and Brandmeister while cool and all is way off topic here. 73s -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From Bryan at bryanfields.net Sun Nov 25 00:14:45 2018 From: Bryan at bryanfields.net (Bryan Fields) Date: Sat, 24 Nov 2018 19:14:45 -0500 Subject: [App_rpt-users] DTMF Decode Logic Output In-Reply-To: References: Message-ID: On 11/23/18 6:57 PM, Monty wrote: > Anyone try to get a logic signal for when DTMF is detected from app_rpt? You can setup a command to run an external program or toggle gpio for any command you want. Typically user defined macro's start with 5, but any number can be used so long as it's unique left to right. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net From tom at k5tra.net Sun Nov 25 00:21:00 2018 From: tom at k5tra.net (Tom) Date: Sat, 24 Nov 2018 18:21:00 -0600 Subject: [App_rpt-users] ASL 1.01 Source Code Message-ID: <006f01d48454$bf9ca360$3ed5ea20$@k5tra.net> I first want to say a big Thank You to Ken Koster (N7IPB) for his suggestions. They were the key to getting it to compile. After the installing various libs like libncurses-dev, libusb-dev,libssl-dev and libcrypto++-dev to eliminate dependency errors; needed to install the g++-4.9 compiler (actually version 4.9.3). The standard compiler is gcc (version 6.3.0). Both are installed; but I need to make it use g++-4.9 by specifying it with ./configure CXX=g++-4.9 CC=gcc-4.9. Initially that wasn't working until I did a make clean (to remove previous compile object file errors). Then I re-ran ./configure CXX=g++-4.9 CC=gcc-4.9, followed by make. That worked! Then make install. 'Hope this helps others fighting the same problem. Tom / K5TRA -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Sun Nov 25 00:24:26 2018 From: mm at midnighteng.com (Mike) Date: Sat, 24 Nov 2018 19:24:26 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: References: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> Message-ID: Gee Bryan... that's what I'm looking for. Where is their contact list ? Any way to contact ? I can find nothing that "does not require a log-in". And that is the problem and point. I would not be asking if I had some other way to reach those that might know or be in authority for a fix ! It's not like I have not tried to follow proper channels for 2 months, just none that I can find, work. So if anyone has a reply, please send it direct /off list. Sorry to disturb your peace with 3 messages Bryan. ...mike/kb8jnm On 11/24/2018 6:52 PM, Bryan Fields wrote: > On 11/24/18 6:35 PM, Mike wrote: >> Sounds like a good idea but user exists by callsign so it will not allow. >> >> Wants me to log-in under my user/pass. >> >> Or I get a contact api dev team error. > Guys, can you all hit them up on their list? This list is for AllStar and > app_rpt users, and Brandmeister while cool and all is way off topic here. > > 73s From n3fe at repeater.net Sun Nov 25 00:42:37 2018 From: n3fe at repeater.net (Corey Dean) Date: Sat, 24 Nov 2018 19:42:37 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> References: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> Message-ID: The support login is separate from the regular portal account. On Sat, Nov 24, 2018 at 6:35 PM Mike wrote: > Sounds like a good idea but user exists by callsign so it will not allow. > > Wants me to log-in under my user/pass. > > Or I get a contact api dev team error. > > ...mike/kb8jnm > On 11/24/2018 6:25 PM, Pierre Martel wrote: > > create a new account. explain your problem and they will fix it. > > > > Garanti > sans virus. www.avast.com > > > Le sam. 24 nov. 2018 ? 17:28, Mike a ?crit : > >> That would be great if contacting support did not require a log-in. >> >> Thanks anyway! >> >> >> ...mike/kb8jnm >> On 11/24/2018 5:24 PM, Pierre Martel wrote: >> >> JUst open a ticket in the support section the brandmeister team will >> answer to it. usely they are pretty fast. >> >> https://support.brandmeister.network >> >> >> >> Garanti >> sans virus. www.avast.com >> >> >> Le sam. 24 nov. 2018 ? 17:15, Mike a ?crit : >> >>> I have been unable to log-in a brandmeister for a few months. >>> >>> But at the same time, I am unable to reset the password via email. >>> >>> Goes through the steps but I get no email for the password reset. I am >>> not using spam catcher on my email servers. >>> >>> Any ideas for a next step ? >>> >>> ...mike/kb8jnm >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users at lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a message to >>> the list detailing the problem. >>> >> >> _______________________________________________ >> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From n3fe at repeater.net Sun Nov 25 00:44:20 2018 From: n3fe at repeater.net (Corey Dean) Date: Sat, 24 Nov 2018 19:44:20 -0500 Subject: [App_rpt-users] Brandmeister Password reset In-Reply-To: References: <6f850607-b202-65c8-79fb-e9c8038c4d1d@midnighteng.com> <29f92258-b282-c98d-5055-0d8cfad3d937@midnighteng.com> Message-ID: All contact info is on the bm wiki On Sat, Nov 24, 2018 at 7:24 PM Mike wrote: > Gee Bryan... > > that's what I'm looking for. Where is their contact list ? > > Any way to contact ? I can find nothing that "does not require a > log-in". And that is the problem and point. > > I would not be asking if I had some other way to reach those that might > know or be in authority for a fix ! > > It's not like I have not tried to follow proper channels for 2 months, > just none that I can find, work. > > So if anyone has a reply, please send it direct /off list. Sorry to > disturb your peace with 3 messages Bryan. > > > ...mike/kb8jnm > > On 11/24/2018 6:52 PM, Bryan Fields wrote: > > On 11/24/18 6:35 PM, Mike wrote: > >> Sounds like a good idea but user exists by callsign so it will not > allow. > >> > >> Wants me to log-in under my user/pass. > >> > >> Or I get a contact api dev team error. > > Guys, can you all hit them up on their list? This list is for AllStar > and > > app_rpt users, and Brandmeister while cool and all is way off topic here. > > > > 73s > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From tom at k5tra.net Sun Nov 25 17:56:24 2018 From: tom at k5tra.net (Tom) Date: Sun, 25 Nov 2018 11:56:24 -0600 Subject: [App_rpt-users] default keyboard Message-ID: <000801d484e8$3038e0a0$90aaa1e0$@k5tra.net> I hadn't noticed the problem with several keys like | \ and ~ not correctly mapping from a USB connected keyboard because I usually interface with SSH. Today, I had a USB keyboard plugged into a Pi and was trying to pipe through grep and I kept getting a ~ instead of |. It turns out that the default keyboard on your Pi is set for Great Britain instead of US. Here's the fix: vi or nano into /etc/default/keyboard change from XKBLAYOUT="gb" to XKBLAYOUT="us" . Tom / K5TRA -------------- next part -------------- An HTML attachment was scrubbed... URL: From monty at ke7jvx.com Mon Nov 26 03:36:37 2018 From: monty at ke7jvx.com (Monty) Date: Sun, 25 Nov 2018 20:36:37 -0700 Subject: [App_rpt-users] DTMF Decode Logic Output In-Reply-To: References: Message-ID: Thanks for the suggestions. I should clarify, I'm trying to use a in-cabinet repeat function of the repeater (duplex=3) and to gate the audio when DTMF is detected. Hoping to use some sort of output from app_rpt to gate the audio instead of building an external decoder. Monty On Sat, Nov 24, 2018 at 5:14 PM Bryan Fields wrote: > On 11/23/18 6:57 PM, Monty wrote: > > Anyone try to get a logic signal for when DTMF is detected from app_rpt? > > You can setup a command to run an external program or toggle gpio for any > command you want. Typically user defined macro's start with 5, but any > number > can be used so long as it's unique left to right. > > > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From w5jr.lists at gmail.com Mon Nov 26 03:58:18 2018 From: w5jr.lists at gmail.com (Mike - W5JR) Date: Sun, 25 Nov 2018 22:58:18 -0500 Subject: [App_rpt-users] DTMF Decode Logic Output In-Reply-To: References: Message-ID: <076F3E26-C28A-43DA-913A-D53A96946255@gmail.com> Following along. In a similar situation using a small controller for local repeat audio/keying but the Pi for beeps and boops. I operate duplex mobile and can?t stand the inherent/unpredictable audio delay when repeat audio runs through the Pi. To pass audio to the Pi, the controller design is such that repeat audio doesn?t mute on DTMF. I probably can cut traces / add parts to solve this, but haven?t pursued it. tnx Mike / W5JR Alpharetta GA > On Nov 25, 2018, at 10:36 PM, Monty wrote: > > Thanks for the suggestions. > > I should clarify, I'm trying to use a in-cabinet repeat function of the repeater (duplex=3) and to gate the audio when DTMF is detected. Hoping to use some sort of output from app_rpt to gate the audio instead of building an external decoder. > > Monty > > >> On Sat, Nov 24, 2018 at 5:14 PM Bryan Fields wrote: >> On 11/23/18 6:57 PM, Monty wrote: >> > Anyone try to get a logic signal for when DTMF is detected from app_rpt? >> >> You can setup a command to run an external program or toggle gpio for any >> command you want. Typically user defined macro's start with 5, but any number >> can be used so long as it's unique left to right. >> >> >> >> -- >> Bryan Fields >> >> 727-409-1194 - Voice >> http://bryanfields.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Mon Nov 26 03:58:42 2018 From: mm at midnighteng.com (Mike) Date: Sun, 25 Nov 2018 22:58:42 -0500 Subject: [App_rpt-users] DTMF Decode Logic Output In-Reply-To: References: Message-ID: I knew what you were after. I did something similar myself paralleling a system with a cat1000 controller a long time ago. But it may not be exactly as you are trying. Short of editing and compiling the source, I think you are out of luck. To my knowledge, there is no ON EVENT flag for this. That would be ideal. That is why I suggested using tonemacro to toggle a audio mute on the output. But, can you make a separate node to use more directly so the audio is directly handled by app_rpt ? Then you have no issue. Just full time link the 2. But I guess that depends on your exact config. ...mike/kb8jnm On 11/25/2018 10:36 PM, Monty wrote: > Thanks for the suggestions. > > I should clarify, I'm trying to use a in-cabinet repeat function of > the repeater (duplex=3) and to gate the audio when DTMF is detected.? > Hoping to use some sort of output from app_rpt to gate the audio > instead of building an external decoder. > > Monty > > > On Sat, Nov 24, 2018 at 5:14 PM Bryan Fields > wrote: > > On 11/23/18 6:57 PM, Monty wrote: > > Anyone try to get a logic signal for when DTMF is detected from > app_rpt? > > You can setup a command to run an external program or toggle gpio > for any > command you want.? Typically user defined macro's start with 5, > but any number > can be used so long as it's unique left to right. > > > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Mon Nov 26 19:45:04 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Mon, 26 Nov 2018 11:45:04 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= Message-ID: We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From cnovey at gmail.com Mon Nov 26 20:04:58 2018 From: cnovey at gmail.com (cnovey) Date: Mon, 26 Nov 2018 12:04:58 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: <0c5501d485c3$50931380$f1b93a80$@gmail.com> Working great here- awesome site! Great work team!! Clifford KK6QMS From: App_rpt-users On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 11:45 AM To: Users of Asterisk app_rpt Subject: [App_rpt-users] It?s almost here We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Mon Nov 26 20:14:30 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Mon, 26 Nov 2018 15:14:30 -0500 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: Tim, First Quick pass.....was able to grab a couple of minutes between meetings... Spelling Error: Main page/ASL News : "The falsh menu is gone. Adobe Flash is no longer required." Otherwise it looks really good. I will have to read through later when I have a chance. On Mon, Nov 26, 2018 at 2:45 PM Tim Sawyer wrote: > We might actually have a new allstarlink.org site before long. The admin > and developer teams have been busy getting ready for the move. We want to > make the transition as smooth as possible and we can use your help to do > that. The new site needs to be tested as much as possible before roll out. > > Could you please use web-tpa.allstarlink.org for your normal > Allstarlink.org activities? Please post here > if you find anything that is not working, not clear as to how it works, > missing stuff, spelling errors, usability or any other comments you might > have. > > -- > Tim WD6AWP > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com http://kc8qch.dx.am Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator Project Manager, HHUL World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Mon Nov 26 21:03:15 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Mon, 26 Nov 2018 13:03:15 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: Fixed, thanks. On Mon, Nov 26, 2018 at 12:14 PM Jeff Lehman wrote: > Tim, > > First Quick pass.....was able to grab a couple of minutes between > meetings... > > Spelling Error: Main page/ASL News : "The falsh menu is gone. Adobe Flash > is no longer required." > > Otherwise it looks really good. I will have to read through later when I > have a chance. > > > > On Mon, Nov 26, 2018 at 2:45 PM Tim Sawyer wrote: > >> We might actually have a new allstarlink.org site before long. The admin >> and developer teams have been busy getting ready for the move. We want to >> make the transition as smooth as possible and we can use your help to do >> that. The new site needs to be tested as much as possible before roll out. >> >> Could you please use web-tpa.allstarlink.org for your normal >> Allstarlink.org activities? Please post here >> if you find anything that is not working, not clear as to how it works, >> missing stuff, spelling errors, usability or any other comments you might >> have. >> >> -- >> Tim WD6AWP >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > -- > Jeff Lehman, KC8QCH > E-mail: kc8qch at gmail.com > http://kc8qch.dx.am > Hamshack Hotline: 4218 > > Webmaster > Hamilton County ARPSC > http://www.hamcoarpsc.org > E-mail: hamcoarpsc at gmail.com > Phone: 513-452-6480 > > Allstar 47374 Administrator > Project Manager, HHUL > World Wide Amateur Radio Guild > http://www.theguildglobal.org > E-Mail: kc8qch at theguildglobal.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Mon Nov 26 21:13:54 2018 From: mark at metcom.com (Mark DuMoulin) Date: Mon, 26 Nov 2018 21:13:54 +0000 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: Tim and Dev Team, It would be a lot better if some form of geographic search was available for nodes. At the very least, possibly search by state. On the spreadsheet, City and State are joined which should not be. Most repeater sites with names like Black Mountain are completely unknown to those traveling. Best regards, Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 2:45 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] It?s almost here We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Mon Nov 26 22:25:29 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Mon, 26 Nov 2018 14:25:29 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: We do have a map. Take a look at http://stats.allstarlink.org/maps/allstarUSAMap.html On Mon, Nov 26, 2018 at 1:14 PM Mark DuMoulin wrote: > Tim and Dev Team, > > > > It would be a lot better if some form of geographic search was available > for nodes. > > At the very least, possibly search by state. On the spreadsheet, City and > State are joined which should not be. > > Most repeater sites with names like Black Mountain are completely unknown > to those traveling. > > > > Best regards, > > > > Mark DuMoulin > > WB2ERS > > > > > > *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] > *On Behalf Of *Tim Sawyer > *Sent:* Monday, November 26, 2018 2:45 PM > *To:* Users of Asterisk app_rpt > *Subject:* [App_rpt-users] It?s almost here > > > > We might actually have a new allstarlink.org site before long. The admin > and developer teams have been busy getting ready for the move. We want to > make the transition as smooth as possible and we can use your help to do > that. The new site needs to be tested as much as possible before roll out. > > > > Could you please use web-tpa.allstarlink.org for your normal > Allstarlink.org activities? Please post here > if you find anything that is not working, not clear as to how it works, > missing stuff, spelling errors, usability or any other comments you might > have. > > > > -- > > Tim WD6AWP > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Mon Nov 26 22:33:36 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Mon, 26 Nov 2018 14:33:36 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: By the way, if you node isn't showing the correct location on that map you can easily update it on the new site. Select Portal then Server Settings. Then place a marker on the server's location. On Mon, Nov 26, 2018 at 2:25 PM Tim Sawyer wrote: > We do have a map. Take a look at > http://stats.allstarlink.org/maps/allstarUSAMap.html > > > On Mon, Nov 26, 2018 at 1:14 PM Mark DuMoulin wrote: > >> Tim and Dev Team, >> >> >> >> It would be a lot better if some form of geographic search was available >> for nodes. >> >> At the very least, possibly search by state. On the spreadsheet, City and >> State are joined which should not be. >> >> Most repeater sites with names like Black Mountain are completely unknown >> to those traveling. >> >> >> >> Best regards, >> >> >> >> Mark DuMoulin >> >> WB2ERS >> >> >> >> >> >> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] >> *On Behalf Of *Tim Sawyer >> *Sent:* Monday, November 26, 2018 2:45 PM >> *To:* Users of Asterisk app_rpt >> *Subject:* [App_rpt-users] It?s almost here >> >> >> >> We might actually have a new allstarlink.org site before long. The admin >> and developer teams have been busy getting ready for the move. We want to >> make the transition as smooth as possible and we can use your help to do >> that. The new site needs to be tested as much as possible before roll out. >> >> >> >> Could you please use web-tpa.allstarlink.org for your normal >> Allstarlink.org activities? Please post here >> if you find anything that is not working, not clear as to how it works, >> missing stuff, spelling errors, usability or any other comments you might >> have. >> >> >> >> -- >> >> Tim WD6AWP >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > -- > Tim WD6AWP > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Mon Nov 26 22:36:28 2018 From: mark at metcom.com (Mark DuMoulin) Date: Mon, 26 Nov 2018 22:36:28 +0000 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here=2E?= Message-ID: <43b56198ae6c4714b87a0d99e04dbfa9@metcom.com> Tim, Very nice. First time I have seen this. On another note, on my allmon2 there is nothing displayed for Node Information. I checked for resolution of nodelist server and no problem. My privatenodes.txt is filled in and formatted correctly. Is there a switch or selection needed for astdb.php to execute? Thanks for the info on changing location. Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 5:25 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here We do have a map. Take a look at http://stats.allstarlink.org/maps/allstarUSAMap.html On Mon, Nov 26, 2018 at 1:14 PM Mark DuMoulin > wrote: Tim and Dev Team, It would be a lot better if some form of geographic search was available for nodes. At the very least, possibly search by state. On the spreadsheet, City and State are joined which should not be. Most repeater sites with names like Black Mountain are completely unknown to those traveling. Best regards, Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 2:45 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] It?s almost here We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Mon Nov 26 22:57:00 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Mon, 26 Nov 2018 14:57:00 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here=2E?= In-Reply-To: <43b56198ae6c4714b87a0d99e04dbfa9@metcom.com> References: <43b56198ae6c4714b87a0d99e04dbfa9@metcom.com> Message-ID: Hmmm, mine are OK. If you're an ASL user go into your /var/www/html directory (or wherever Allmon is installed) and do ./astdb.php On Mon, Nov 26, 2018 at 2:36 PM Mark DuMoulin wrote: > Tim, > > > > *Very nice*. First time I have seen this. > > On another note, on my allmon2 there is nothing displayed for Node > Information. > > I checked for resolution of nodelist server and no problem. > > My privatenodes.txt is filled in and formatted correctly. > > Is there a switch or selection needed for astdb.php to execute? > > > > Thanks for the info on changing location. > > > > Mark DuMoulin > > WB2ERS > > > > *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] > *On Behalf Of *Tim Sawyer > *Sent:* Monday, November 26, 2018 5:25 PM > *To:* Users of Asterisk app_rpt > *Subject:* Re: [App_rpt-users] It?s almost here > > > > We do have a map. Take a look at > http://stats.allstarlink.org/maps/allstarUSAMap.html > > > > > > On Mon, Nov 26, 2018 at 1:14 PM Mark DuMoulin wrote: > > Tim and Dev Team, > > > > It would be a lot better if some form of geographic search was available > for nodes. > > At the very least, possibly search by state. On the spreadsheet, City and > State are joined which should not be. > > Most repeater sites with names like Black Mountain are completely unknown > to those traveling. > > > > Best regards, > > > > Mark DuMoulin > > WB2ERS > > > > > > *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] > *On Behalf Of *Tim Sawyer > *Sent:* Monday, November 26, 2018 2:45 PM > *To:* Users of Asterisk app_rpt > *Subject:* [App_rpt-users] It?s almost here > > > > We might actually have a new allstarlink.org site before long. The admin > and developer teams have been busy getting ready for the move. We want to > make the transition as smooth as possible and we can use your help to do > that. The new site needs to be tested as much as possible before roll out. > > > > Could you please use web-tpa.allstarlink.org for your normal > Allstarlink.org activities? Please post here > if you find anything that is not working, not clear as to how it works, > missing stuff, spelling errors, usability or any other comments you might > have. > > > > -- > > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > > > -- > > Tim WD6AWP > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Tue Nov 27 00:43:18 2018 From: mark at metcom.com (Mark DuMoulin) Date: Tue, 27 Nov 2018 00:43:18 +0000 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here=2E?= In-Reply-To: References: <43b56198ae6c4714b87a0d99e04dbfa9@metcom.com> Message-ID: <4cc6cae26a0049c4b5f83b3e695f5cb3@metcom.com> Tim, I get no such file or directory even though, as you see below, it?s there: root at GARASRV:/var/www/html# ls about.php EventSource.js README allmon.css footer.php server.php allmon.inc.php gara tr allmon.ini.php header.php v allmon.ini.txt index.html vall allmon.js index.php voter allstarLogo.png jquery.cookie.js voter.ini.php astdb.php jquery.js voter.ini.txt connect.php link.php votermon controlpanel.ini.php login.php voter.php controlpanel.ini.txt menu.php voterserver.php controlpanel.php privatenodes.sample.txt controlserver.php privatenodes.txt root at GARASRV:/var/www/html# /astdb.php -bash: /astdb.php: No such file or directory Mark From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 5:57 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here. Hmmm, mine are OK. If you're an ASL user go into your /var/www/html directory (or wherever Allmon is installed) and do ./astdb.php On Mon, Nov 26, 2018 at 2:36 PM Mark DuMoulin > wrote: Tim, Very nice. First time I have seen this. On another note, on my allmon2 there is nothing displayed for Node Information. I checked for resolution of nodelist server and no problem. My privatenodes.txt is filled in and formatted correctly. Is there a switch or selection needed for astdb.php to execute? Thanks for the info on changing location. Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 5:25 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here We do have a map. Take a look at http://stats.allstarlink.org/maps/allstarUSAMap.html On Mon, Nov 26, 2018 at 1:14 PM Mark DuMoulin > wrote: Tim and Dev Team, It would be a lot better if some form of geographic search was available for nodes. At the very least, possibly search by state. On the spreadsheet, City and State are joined which should not be. Most repeater sites with names like Black Mountain are completely unknown to those traveling. Best regards, Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 2:45 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] It?s almost here We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Tue Nov 27 00:46:21 2018 From: mark at metcom.com (Mark DuMoulin) Date: Tue, 27 Nov 2018 00:46:21 +0000 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here=2E?= In-Reply-To: References: <43b56198ae6c4714b87a0d99e04dbfa9@metcom.com> Message-ID: Tim, Sorry, my bad, I forgot the dot! HI Works fine now. Does Allmon2 have a way to drive an audio bus like the old VotMon? Mark From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 5:57 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here. Hmmm, mine are OK. If you're an ASL user go into your /var/www/html directory (or wherever Allmon is installed) and do ./astdb.php On Mon, Nov 26, 2018 at 2:36 PM Mark DuMoulin > wrote: Tim, Very nice. First time I have seen this. On another note, on my allmon2 there is nothing displayed for Node Information. I checked for resolution of nodelist server and no problem. My privatenodes.txt is filled in and formatted correctly. Is there a switch or selection needed for astdb.php to execute? Thanks for the info on changing location. Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 5:25 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here We do have a map. Take a look at http://stats.allstarlink.org/maps/allstarUSAMap.html On Mon, Nov 26, 2018 at 1:14 PM Mark DuMoulin > wrote: Tim and Dev Team, It would be a lot better if some form of geographic search was available for nodes. At the very least, possibly search by state. On the spreadsheet, City and State are joined which should not be. Most repeater sites with names like Black Mountain are completely unknown to those traveling. Best regards, Mark DuMoulin WB2ERS From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer Sent: Monday, November 26, 2018 2:45 PM To: Users of Asterisk app_rpt Subject: [App_rpt-users] It?s almost here We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From larry at n7fm.com Tue Nov 27 06:08:05 2018 From: larry at n7fm.com (larry) Date: Mon, 26 Nov 2018 22:08:05 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Tue Nov 27 14:36:03 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Tue, 27 Nov 2018 06:36:03 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: Larry, Certainly the support part of the site could be beefed up. Any suggestions on how to arrange or word better for newbies? On Mon, Nov 26, 2018 at 10:08 PM larry wrote: > Tim, > > From what I see it is looking really good. I have only this comment... > > For the new user coming to the Allstar Site for the first time. Nice as it looks... the HELP links that are buried within the SUPPORT --> > Technical Tab statement are not readily apparent and that visiting them will take you to to the How-to and other drupal/wiki data we come to > depended on. > > This is one of the drawbacks that I hear. People (trying to grasp Allstar) have a hard time finding an understanding of how it all works > and how to proceed. > Newbie - Understanding and How-To links should be pointed out from the main web page and not become a search project for new people. > > Otherwise things are looking good to me. > > Larry - N7FM > > > > On 11/26/18 11:45 AM, Tim Sawyer wrote: > > We might actually have a new allstarlink.org site before long. The admin > and developer teams have been busy getting ready for the move. We want to > make the transition as smooth as possible and we can use your help to do > that. The new site needs to be tested as much as possible before roll out. > > Could you please use web-tpa.allstarlink.org for your normal > Allstarlink.org activities? Please post here > if you find anything that is not working, not clear as to how it works, > missing stuff, spelling errors, usability or any other comments you might > have. > > -- > Tim WD6AWP > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From kevin.babich at gmail.com Tue Nov 27 16:42:48 2018 From: kevin.babich at gmail.com (Kevin Babich) Date: Tue, 27 Nov 2018 10:42:48 -0600 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: <06cc01d48670$3b255af0$b17010d0$@gmail.com> Tim, On the map view, I noticed that my system in Valparaiso isn?t correctly displayed. I suspect the issue is that I have multiple repeaters at the same site. Do you think it would be practicable to parse the database, and where multiple entries exist for the same call sign and location, to create a list? Kindest Regards, Kevin Babich | N9IAA Valparaiso, IN 46383 Mobile: 219.406.9707 Cessna 421 Cesssna Conquest I/II Beechcraft King Air 90/200 ??It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...? -Theodore Roosevelt From: App_rpt-users On Behalf Of Tim Sawyer Sent: Tuesday, November 27, 2018 8:36 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here Larry, Certainly the support part of the site could be beefed up. Any suggestions on how to arrange or word better for newbies? On Mon, Nov 26, 2018 at 10:08 PM larry > wrote: Tim, From what I see it is looking really good. I have only this comment... For the new user coming to the Allstar Site for the first time. Nice as it looks... the HELP links that are buried within the SUPPORT --> Technical Tab statement are not readily apparent and that visiting them will take you to to the How-to and other drupal/wiki data we come to depended on. This is one of the drawbacks that I hear. People (trying to grasp Allstar) have a hard time finding an understanding of how it all works and how to proceed. Newbie - Understanding and How-To links should be pointed out from the main web page and not become a search project for new people. Otherwise things are looking good to me. Larry - N7FM On 11/26/18 11:45 AM, Tim Sawyer wrote: We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at metcom.com Tue Nov 27 16:45:20 2018 From: mark at metcom.com (Mark DuMoulin) Date: Tue, 27 Nov 2018 16:45:20 +0000 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: <06cc01d48670$3b255af0$b17010d0$@gmail.com> References: <06cc01d48670$3b255af0$b17010d0$@gmail.com> Message-ID: Tim, To add to Kevin?s request, I have 12 repeaters accessible from the same ID 42279. Would it be possible to display their information on the map? Tnx, Mark DuMoulin WB2ERS Beech F33 hi From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Kevin Babich Sent: Tuesday, November 27, 2018 11:43 AM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] It?s almost here Tim, On the map view, I noticed that my system in Valparaiso isn?t correctly displayed. I suspect the issue is that I have multiple repeaters at the same site. Do you think it would be practicable to parse the database, and where multiple entries exist for the same call sign and location, to create a list? Kindest Regards, Kevin Babich | N9IAA Valparaiso, IN 46383 Mobile: 219.406.9707 Cessna 421 Cesssna Conquest I/II Beechcraft King Air 90/200 ??It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...? -Theodore Roosevelt From: App_rpt-users > On Behalf Of Tim Sawyer Sent: Tuesday, November 27, 2018 8:36 AM To: Users of Asterisk app_rpt > Subject: Re: [App_rpt-users] It?s almost here Larry, Certainly the support part of the site could be beefed up. Any suggestions on how to arrange or word better for newbies? On Mon, Nov 26, 2018 at 10:08 PM larry > wrote: Tim, From what I see it is looking really good. I have only this comment... For the new user coming to the Allstar Site for the first time. Nice as it looks... the HELP links that are buried within the SUPPORT --> Technical Tab statement are not readily apparent and that visiting them will take you to to the How-to and other drupal/wiki data we come to depended on. This is one of the drawbacks that I hear. People (trying to grasp Allstar) have a hard time finding an understanding of how it all works and how to proceed. Newbie - Understanding and How-To links should be pointed out from the main web page and not become a search project for new people. Otherwise things are looking good to me. Larry - N7FM On 11/26/18 11:45 AM, Tim Sawyer wrote: We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Tue Nov 27 16:50:28 2018 From: mm at midnighteng.com (Mike) Date: Tue, 27 Nov 2018 11:50:28 -0500 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: <06cc01d48670$3b255af0$b17010d0$@gmail.com> References: <06cc01d48670$3b255af0$b17010d0$@gmail.com> Message-ID: If I were you, I would take consideration to security and not list the exact locations of your systems. Place them somewhere near where they are and not the exact listing per your co-ordination spec's. That is a message to everyone !? Some of you do not have a issue to worry about, but some do. Why would anyone need to know the exact location. ...mike/kb8jnm On 11/27/2018 11:42 AM, Kevin Babich wrote: > > Tim, > > On the map view, I noticed that my system in Valparaiso isn?t > correctly displayed.? I suspect the issue is that I have multiple > repeaters at the same site.? Do you think it would be practicable to > parse the database, and where multiple entries exist for the same call > sign and location, to create a list? > > Kindest Regards, > > Kevin Babich | N9IAA > > Valparaiso, IN 46383 > > Mobile: 219.406.9707 > > Cessna 421 > > Cesssna Conquest I/II > > Beechcraft King Air 90/200 > > ??It is not the critic who counts; not the man who points out how the > strong man stumbles, or where the doer of deeds could have done them > better. The credit belongs to the man who is actually in the arena, > whose face is marred by dust and sweat and blood; who strives > valiantly; who errs, who comes short again and again, because there is > no effort without error and shortcoming; but who does actually strive > to do the deeds; who knows great enthusiasms, the great devotions; who > spends himself in a worthy cause; who at the best knows in the end the > triumph of high achievement, and who at the worst, if he fails, at > least fails while daring greatly, so that his place shall never be > with those cold and timid souls who neither know victory nor > defeat...?? -Theodore Roosevelt > > *From:*App_rpt-users *On > Behalf Of *Tim Sawyer > *Sent:* Tuesday, November 27, 2018 8:36 AM > *To:* Users of Asterisk app_rpt > *Subject:* Re: [App_rpt-users] It?s almost here > > Larry, > > Certainly the support part of the site could be beefed up. Any > suggestions on how to arrange or word better for newbies? > > On Mon, Nov 26, 2018 at 10:08 PM larry > wrote: > > Tim, > > From what I see it is looking really good. I have only this comment... > > For the new user coming to the Allstar Site for the first time. Nice as it looks... the HELP links that are buried within the SUPPORT --> > > Technical Tab statement are not readily apparent and that visiting them will take you to to the How-to and other drupal/wiki data we come to > > depended on. > > This is one of the drawbacks that I hear. People (trying to grasp Allstar) have a hard time finding an understanding of how it all works > > and how to proceed. > > Newbie - Understanding and How-To links should be pointed out from the main web page and not become a search project for new people. > > Otherwise things are looking good to me. > > Larry - N7FM > > On 11/26/18 11:45 AM, Tim Sawyer wrote: > > We might actually have a new allstarlink.org > ?site before long. The admin and > developer teams have been busy getting ready for the move. We > want to make the transition as smooth as possible and we can > use your help to do that. The new site needs to be tested as > much as possible before roll out. > > Could you please use web-tpa.allstarlink.org > ?for your normal > Allstarlink.org ?activities? Please > post here if you find anything that is not working, not clear > as to how it works, missing stuff, spelling errors, usability > or any other comments you might have. > > -- > > Tim WD6AWP > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a > message to the list detailing the problem. > > > -- > > Tim WD6AWP > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From kevin.babich at gmail.com Tue Nov 27 18:13:45 2018 From: kevin.babich at gmail.com (Kevin Babich) Date: Tue, 27 Nov 2018 12:13:45 -0600 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: <06cc01d48670$3b255af0$b17010d0$@gmail.com> Message-ID: <8F08B89F-198E-4FA3-8B00-DA7DD0AA6391@gmail.com> Mike, That?s completely reasonable, save for the fact only my 10M repeater shows up. Kevin J. Babich 219.406.9707 Mobile ***Mobile EMail*** Please excuse any typos and brevity. > On Nov 27, 2018, at 10:50 AM, Mike wrote: > > If I were you, I would take consideration to security and not list the exact locations of your systems. > > Place them somewhere near where they are and not the exact listing per your co-ordination spec's. > > That is a message to everyone ! Some of you do not have a issue to worry about, but some do. > > Why would anyone need to know the exact location. > > ...mike/kb8jnm > > > >> On 11/27/2018 11:42 AM, Kevin Babich wrote: >> Tim, >> >> On the map view, I noticed that my system in Valparaiso isn?t correctly displayed. I suspect the issue is that I have multiple repeaters at the same site. Do you think it would be practicable to parse the database, and where multiple entries exist for the same call sign and location, to create a list? >> >> Kindest Regards, >> >> Kevin Babich | N9IAA >> Valparaiso, IN 46383 >> >> Mobile: 219.406.9707 >> >> Cessna 421 >> Cesssna Conquest I/II >> Beechcraft King Air 90/200 >> >> ??It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...? -Theodore Roosevelt >> >> From: App_rpt-users On Behalf Of Tim Sawyer >> Sent: Tuesday, November 27, 2018 8:36 AM >> To: Users of Asterisk app_rpt >> Subject: Re: [App_rpt-users] It?s almost here >> >> Larry, >> >> Certainly the support part of the site could be beefed up. Any suggestions on how to arrange or word better for newbies? >> >> On Mon, Nov 26, 2018 at 10:08 PM larry wrote: >> Tim, >> >> From what I see it is looking really good. I have only this comment... >> >> For the new user coming to the Allstar Site for the first time. Nice as it looks... the HELP links that are buried within the SUPPORT --> >> Technical Tab statement are not readily apparent and that visiting them will take you to to the How-to and other drupal/wiki data we come to >> depended on. >> >> This is one of the drawbacks that I hear. People (trying to grasp Allstar) have a hard time finding an understanding of how it all works >> and how to proceed. >> Newbie - Understanding and How-To links should be pointed out from the main web page and not become a search project for new people. >> >> Otherwise things are looking good to me. >> >> Larry - N7FM >> >> >> On 11/26/18 11:45 AM, Tim Sawyer wrote: >> We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. >> >> Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. >> >> -- >> Tim WD6AWP >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> >> -- >> Tim WD6AWP >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Thu Nov 29 21:33:13 2018 From: russell at kv4s.com (Russell Thomas) Date: Thu, 29 Nov 2018 15:33:13 -0600 Subject: [App_rpt-users] Allmon2 one instance to control multiple nodes Message-ID: I'm probably missing something simple. I'm trying to just use one dashboard to monitor/control multiple nodes. Example: Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604 Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604 The nodes are on 2 different virtual servers. the secondary node's allmon can connect to the asterisk manager but the Main Allmon2 can't connect to the asterisk manger. Thoughts? 73, Russell Thomas, KV4S -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Thu Nov 29 21:37:10 2018 From: mm at midnighteng.com (Mike) Date: Thu, 29 Nov 2018 16:37:10 -0500 Subject: [App_rpt-users] Allmon2 one instance to control multiple nodes In-Reply-To: References: Message-ID: Check permissions on manager.conf verify port address is correct in both allmon and manager.conf as well as ip/port Check port forwarding in router. just my thoughts... ...mike/kb8jnm On 11/29/2018 4:33 PM, Russell Thomas wrote: > I'm probably missing something simple. > I'm trying to just use one dashboard to monitor/control multiple nodes. > Example: > Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604 > Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604 > > The nodes are on 2 different virtual servers. > the secondary node's allmon can connect to the asterisk manager but > the Main Allmon2 can't connect to the asterisk manger. > > Thoughts? > > 73, > Russell Thomas, KV4S > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Thu Nov 29 22:21:19 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Thu, 29 Nov 2018 14:21:19 -0800 Subject: [App_rpt-users] Allmon2 one instance to control multiple nodes In-Reply-To: References: Message-ID: Manager.conf allows localhost access but not remote by default. You have to open it up but be sure to create a access list so that only your Allmon IP can access VM. On Thu, Nov 29, 2018 at 1:33 PM Russell Thomas wrote: > I'm probably missing something simple. > I'm trying to just use one dashboard to monitor/control multiple nodes. > Example: > Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604 > Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604 > > The nodes are on 2 different virtual servers. > the secondary node's allmon can connect to the asterisk manager but the > Main Allmon2 can't connect to the asterisk manger. > > Thoughts? > > 73, > Russell Thomas, KV4S > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From mm at midnighteng.com Thu Nov 29 22:23:43 2018 From: mm at midnighteng.com (Mike) Date: Thu, 29 Nov 2018 17:23:43 -0500 Subject: [App_rpt-users] Allmon2 one instance to control multiple nodes In-Reply-To: References: Message-ID: <37e46668-a2dd-dc0c-a112-3931e2a6968e@midnighteng.com> Sorry , I did not notice at first these were both virtual but is all the same except for that router. But I wanted to add a few checks... allow manager port through your firewall ? set bind address? to this until you have it working bindaddr = 0.0.0.0 Some other... enabled = yes webenabled = yes port = 5038 If all else fails, move the file (copy) it to the one that does not and check own/permissions and test. Should tell you something. Perhaps it is a type error in your ini.php - ip/pass/port One of those itchy things that drives ya nuts ! LOL ...mike/kb8jnm On 11/29/2018 4:33 PM, Russell Thomas wrote: > I'm probably missing something simple. > I'm trying to just use one dashboard to monitor/control multiple nodes. > Example: > Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604 > Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604 > > The nodes are on 2 different virtual servers. > the secondary node's allmon can connect to the asterisk manager but > the Main Allmon2 can't connect to the asterisk manger. > > Thoughts? > > 73, > Russell Thomas, KV4S > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From russell at kv4s.com Fri Nov 30 02:33:13 2018 From: russell at kv4s.com (Russell Thomas) Date: Thu, 29 Nov 2018 20:33:13 -0600 Subject: [App_rpt-users] Allmon2 one instance to control multiple nodes In-Reply-To: <37e46668-a2dd-dc0c-a112-3931e2a6968e@midnighteng.com> References: <37e46668-a2dd-dc0c-a112-3931e2a6968e@midnighteng.com> Message-ID: thanks for the responses. looks like i had the 0.0.0.0 in the wrong node. On Thu, Nov 29, 2018 at 4:23 PM Mike wrote: > Sorry , I did not notice at first these were both virtual but is all the > same except for that router. > > But I wanted to add a few checks... > > allow manager port through your firewall ? > > set bind address to this until you have it working > > bindaddr = 0.0.0.0 > > Some other... > > enabled = > yes > webenabled = > yes > port = 5038 > > If all else fails, move the file (copy) it to the one that does not and > check own/permissions and test. > > Should tell you something. > > Perhaps it is a type error in your ini.php - ip/pass/port > > One of those itchy things that drives ya nuts ! LOL > > ...mike/kb8jnm > > > On 11/29/2018 4:33 PM, Russell Thomas wrote: > > I'm probably missing something simple. > I'm trying to just use one dashboard to monitor/control multiple nodes. > Example: > Main Allmon2: http://173.199.114.204/allmon2/link.php?nodes=41605,41604 > Secondary node: http://45.77.204.214/allmon2/link.php?nodes=41604 > > The nodes are on 2 different virtual servers. > the secondary node's allmon can connect to the asterisk manager but the > Main Allmon2 can't connect to the asterisk manger. > > Thoughts? > > 73, > Russell Thomas, KV4S > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From k6ecm1 at gmail.com Fri Nov 30 16:42:01 2018 From: k6ecm1 at gmail.com (Bob Pyke) Date: Fri, 30 Nov 2018 08:42:01 -0800 Subject: [App_rpt-users] Private Node IP Updates Message-ID: One of the features of AllstarLink I really appreciate is the node registration, and the resulting rpt_extnodes list that reports any updates in public IP address. I?m using an ISP that changes public IP periodically, and without notice, so this feature of AllstarLink is very important. Is there any way of providing a similar capability when using private nodes? Thanks, Bob K6ECM 73 From mm at midnighteng.com Fri Nov 30 16:55:32 2018 From: mm at midnighteng.com (Mike) Date: Fri, 30 Nov 2018 11:55:32 -0500 Subject: [App_rpt-users] Private Node IP Updates In-Reply-To: References: Message-ID: One possible method and probably most popular is to subscribe to a dynamic DNS service. Most routers have built-in section to enable these services. It basically just uses a software update to read your current IP and send it to the name server who will hand it to those seeking your address. Check with a few actually using a service to see how it has worked for them (reputation) A quick look on the net will show you there are plenty of folks doing it. I have not used one in 17 years so I can't recommend one. ...mike/kb8jnm On 11/30/2018 11:42 AM, Bob Pyke wrote: > One of the features of AllstarLink I really appreciate is the node registration, and the resulting rpt_extnodes list that reports any updates in public IP address. I?m using an ISP that changes public IP periodically, and without notice, so this feature of AllstarLink is very important. Is there any way of providing a similar capability when using private nodes? > > Thanks, > Bob > K6ECM > 73 > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. From bryan at k6cbr.us Fri Nov 30 17:09:36 2018 From: bryan at k6cbr.us (Bryan St Clair) Date: Fri, 30 Nov 2018 09:09:36 -0800 Subject: [App_rpt-users] Private Node IP Updates In-Reply-To: References: Message-ID: noip.com has a free dynamic dns service. (free requires confirmation every month) If your router doesn't support the service, they offer a windows, mac and linux download to run on a machine inside the same network. I use another free service, but they recently stopped offering the free option. This noip.com has a $25 a year option that gives you up to 25 hostnames. (depending on how many does you use, could be useful.) I have one on allstar that uses this service, and 3 off allstar, all have had zero complaints. All do the $25 a year option. On Fri, Nov 30, 2018 at 8:55 AM Mike wrote: > One possible method and probably most popular is to subscribe to a > dynamic DNS service. > > Most routers have built-in section to enable these services. > > It basically just uses a software update to read your current IP and > send it to the name server who will hand it to those seeking your address. > > Check with a few actually using a service to see how it has worked for > them (reputation) > > A quick look on the net will show you there are plenty of folks doing > it. I have not used one in 17 years so I can't recommend one. > > ...mike/kb8jnm > > > On 11/30/2018 11:42 AM, Bob Pyke wrote: > > One of the features of AllstarLink I really appreciate is the node > registration, and the resulting rpt_extnodes list that reports any updates > in public IP address. I?m using an ISP that changes public IP periodically, > and without notice, so this feature of AllstarLink is very important. Is > there any way of providing a similar capability when using private nodes? > > > > Thanks, > > Bob > > K6ECM > > 73 > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users at lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Bryan K6CBR bryan at k6cbr.us Allstar Base: 43918, 43991 Allstar Hubs: 43919, 47036, 47061(Testing) -------------- next part -------------- An HTML attachment was scrubbed... URL: From k6ecm1 at gmail.com Fri Nov 30 17:55:09 2018 From: k6ecm1 at gmail.com (Bob Pyke) Date: Fri, 30 Nov 2018 09:55:09 -0800 Subject: [App_rpt-users] Private Node IP Updates In-Reply-To: References: Message-ID: Mike and Bryan, sounds good. Thanks, Bob K6ECM 73 > On Nov 30, 2018, at 9:09 AM, Bryan St Clair wrote: > > > noip.com has a free dynamic dns service. (free requires confirmation every month) If your router doesn't support the service, they offer a windows, mac and linux download to run on a machine inside the same network. > > I use another free service, but they recently stopped offering the free option. This noip.com has a $25 a year option that gives you up to 25 hostnames. (depending on how many does you use, could be useful.) I have one on allstar that uses this service, and 3 off allstar, all have had zero complaints. All do the $25 a year option. > >> On Fri, Nov 30, 2018 at 8:55 AM Mike wrote: >> One possible method and probably most popular is to subscribe to a >> dynamic DNS service. >> >> Most routers have built-in section to enable these services. >> >> It basically just uses a software update to read your current IP and >> send it to the name server who will hand it to those seeking your address. >> >> Check with a few actually using a service to see how it has worked for >> them (reputation) >> >> A quick look on the net will show you there are plenty of folks doing >> it. I have not used one in 17 years so I can't recommend one. >> >> ...mike/kb8jnm >> >> >> On 11/30/2018 11:42 AM, Bob Pyke wrote: >> > One of the features of AllstarLink I really appreciate is the node registration, and the resulting rpt_extnodes list that reports any updates in public IP address. I?m using an ISP that changes public IP periodically, and without notice, so this feature of AllstarLink is very important. Is there any way of providing a similar capability when using private nodes? >> > >> > Thanks, >> > Bob >> > K6ECM >> > 73 >> > >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users at lists.allstarlink.org >> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > -- > Bryan > K6CBR > bryan at k6cbr.us > Allstar Base: 43918, 43991 > Allstar Hubs: 43919, 47036, 47061(Testing) > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tisawyer at gmail.com Fri Nov 30 19:13:57 2018 From: tisawyer at gmail.com (Tim Sawyer) Date: Fri, 30 Nov 2018 11:13:57 -0800 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: Someone requested a better favicon and there was another request for better visibility of the nodes list status page link. Both of those requests are complete. On Mon, Nov 26, 2018 at 11:45 AM Tim Sawyer wrote: > We might actually have a new allstarlink.org site before long. The admin > and developer teams have been busy getting ready for the move. We want to > make the transition as smooth as possible and we can use your help to do > that. The new site needs to be tested as much as possible before roll out. > > Could you please use web-tpa.allstarlink.org for your normal > Allstarlink.org activities? Please post here > if you find anything that is not working, not clear as to how it works, > missing stuff, spelling errors, usability or any other comments you might > have. > > -- > Tim WD6AWP > -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From kc8qch at gmail.com Fri Nov 30 19:52:28 2018 From: kc8qch at gmail.com (Jeff Lehman) Date: Fri, 30 Nov 2018 14:52:28 -0500 Subject: [App_rpt-users] Private Node IP Updates In-Reply-To: References: Message-ID: I +1 Bryan's contribution. I also have used Noip for many many years and have never had an issue with it. I used the paid service for a while for myself and then added the local club's website to it, which I maintain, and then just recently moved it off to a different service becuse the host of our site does DNS it's self. I now only use the free one for me. It's great. Jeff On Fri, Nov 30, 2018 at 12:55 PM Bob Pyke wrote: > Mike and Bryan, sounds good. > > Thanks, > Bob > K6ECM > 73 > > > On Nov 30, 2018, at 9:09 AM, Bryan St Clair wrote: > > > noip.com has a free dynamic dns service. (free requires confirmation > every month) If your router doesn't support the service, they offer a > windows, mac and linux download to run on a machine inside the same network. > > I use another free service, but they recently stopped offering the free > option. This noip.com has a $25 a year option that gives you up to 25 > hostnames. (depending on how many does you use, could be useful.) I have > one on allstar that uses this service, and 3 off allstar, all have had zero > complaints. All do the $25 a year option. > > On Fri, Nov 30, 2018 at 8:55 AM Mike wrote: > >> One possible method and probably most popular is to subscribe to a >> dynamic DNS service. >> >> Most routers have built-in section to enable these services. >> >> It basically just uses a software update to read your current IP and >> send it to the name server who will hand it to those seeking your address. >> >> Check with a few actually using a service to see how it has worked for >> them (reputation) >> >> A quick look on the net will show you there are plenty of folks doing >> it. I have not used one in 17 years so I can't recommend one. >> >> ...mike/kb8jnm >> >> >> On 11/30/2018 11:42 AM, Bob Pyke wrote: >> > One of the features of AllstarLink I really appreciate is the node >> registration, and the resulting rpt_extnodes list that reports any updates >> in public IP address. I?m using an ISP that changes public IP periodically, >> and without notice, so this feature of AllstarLink is very important. Is >> there any way of providing a similar capability when using private nodes? >> > >> > Thanks, >> > Bob >> > K6ECM >> > 73 >> > >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users at lists.allstarlink.org >> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> > You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users at lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > -- > Bryan > K6CBR > bryan at k6cbr.us > Allstar Base: 43918, 43991 > Allstar Hubs: 43919, 47036, 47061(Testing) > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > -- Jeff Lehman, KC8QCH E-mail: kc8qch at gmail.com Hamshack Hotline: 4218 Webmaster Hamilton County ARPSC http://www.hamcoarpsc.org E-mail: hamcoarpsc at gmail.com Phone: 513-452-6480 Allstar 47374 Administrator World Wide Amateur Radio Guild http://www.theguildglobal.org E-Mail: kc8qch at theguildglobal.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From kevin.babich at gmail.com Fri Nov 30 20:37:07 2018 From: kevin.babich at gmail.com (Kevin Babich) Date: Fri, 30 Nov 2018 14:37:07 -0600 Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: <047b01d488ec$76dbe950$6493bbf0$@gmail.com> Tim, I thought I?d more correctly make a request, as such, please find: >From the overview map, where pins are displayed, where a site hosts multiple repeaters under one user/call sign, a list of the frequencies at the site would be ideal. For reference, my site pin lists only one repeater (in this case, my 10m system). The other systems, are not shown. Kindest Regards, Kevin Babich | N9IAA Valparaiso, IN 46383 Mobile: 219.406.9707 Cessna 421 Cesssna Conquest I/II Beechcraft King Air 90/200 ??It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...? -Theodore Roosevelt From: App_rpt-users On Behalf Of Tim Sawyer Sent: Friday, November 30, 2018 1:14 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] It?s almost here Someone requested a better favicon and there was another request for better visibility of the nodes list status page link. Both of those requests are complete. On Mon, Nov 26, 2018 at 11:45 AM Tim Sawyer > wrote: We might actually have a new allstarlink.org site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out. Could you please use web-tpa.allstarlink.org for your normal Allstarlink.org activities? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. -- Tim WD6AWP -- Tim WD6AWP -------------- next part -------------- An HTML attachment was scrubbed... URL: From andy_kb7b at yahoo.com Fri Nov 30 22:55:46 2018 From: andy_kb7b at yahoo.com (Andy KB7B) Date: Fri, 30 Nov 2018 22:55:46 +0000 (UTC) Subject: [App_rpt-users] =?utf-8?q?It=E2=80=99s_almost_here?= In-Reply-To: References: Message-ID: <474221856.577840.1543618546258@mail.yahoo.com> Thank you Tim, now I can tell it's a star. -Andy KB7B From: Tim Sawyer To: Users of Asterisk app_rpt Sent: Saturday, December 1, 2018 4:16 AM Subject: Re: [App_rpt-users] It?s almost here Someone requested a better favicon and there was another request for better visibility of the nodes list status page link. Both of those requests are complete. ?? On Mon, Nov 26, 2018 at 11:45 AM Tim Sawyer wrote: We might actually have a new?allstarlink.org?site before long. The admin and developer teams have been busy getting ready for the move. We want to make the transition as smooth as possible and we can use your help to do that. The new site needs to be tested as much as possible before roll out.? Could you please use?web-tpa.allstarlink.org?for your normal?Allstarlink.org?activities?? Please post here if you find anything that is not working, not clear as to how it works, missing stuff, spelling errors, usability or any other comments you might have. ? -- Tim WD6AWP -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: From kevin.babich at gmail.com Fri Nov 30 23:19:03 2018 From: kevin.babich at gmail.com (Kevin Babich) Date: Fri, 30 Nov 2018 17:19:03 -0600 Subject: [App_rpt-users] Remote base Message-ID: <04ca01d48903$156b5590$404200b0$@gmail.com> Greetings, Has anyone successfully integrated a Kenwood radio into Allstar with full Remote Base functionality (frequency, offset, etc.)? If so, can you please share which radio was integrated / interfacing / etc.? Kindest Regards, Kevin Babich | N9IAA Valparaiso, IN 46383 Mobile: 219.406.9707 Cessna 421 Cesssna Conquest I/II Beechcraft King Air 90/200 ".It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat..." -Theodore Roosevelt -------------- next part -------------- An HTML attachment was scrubbed... URL: