[App_rpt-users] duplex=0 bug?

[Dave Maciorowski]

Hi Stephen,

That's how I have my 7330 interface set up:

duplex = 0
linktolink = yes
hangtime = 0
althangtime = 0

I think ikt's working as expected.

73,

   Dave
   WA1JHK


On 8/29/2018 6:52 AM, Stephen - K1LNX wrote:
> Hi guys,
>      I recently re-built the node that interfaces to my controller, and one of the things I noticed after re-building it that there was a fairly long hang time, anywhere from 5-10 seconds.
>
> I have the following set, and unless I'm misinterpreting how this is expected to work, could this be a potential bug?
>
> duplex = 0
> ;0 = Half duplex with no telemetry tones or hang time.
>
> linktolink = yes
> ; disables forcing physical half-duplex operation of main repeater while
> ; still keeping half-duplex semantics (optional)
>
> I am still testing, but setting the the hang time to "0" appears to have fixed it, I also tried setting other params to "0" in the wait-times section:
>
> hangtime = 0
> ; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms)
>
> althangtime = 0
> ; longer squelch tail
>
> [wait-times]
> telemwait = 0                            ; Time to wait before sending most telemetry
> idwait = 500                              ; Time to wait before starting ID
> unkeywait = 0                           ; Time to wait after unkey before sending CT's and link telemetry
> calltermwait = 0                        ; Time to wait before announcing "call terminated"
>
> Anyone else run into this, or is this working as expected? Hardware is a Raspberry Pi 3 B+ and Repeater Builder RIM "lite" SCOM interface.
>
> 73
> Stephen
> K1LNX
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.




---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180902/851af034/attachment.html>