[App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)

[Clifford Novey]

Ok sounds good I will try it and report back, thanks.
Clifford

On Mon, Sep 3, 2018, 3:37 PM Mike <mm at midnighteng.com> wrote:

> I have seen many strange things when/if you update/upgrade without
> putting a hold on updating the kernel headers.
> Do it first on first boot.
>
> If you have some other 4gb+ SD card, why not try it again fresh
> and be sure.
>
> ...mike/kb8jnm
>
> On 9/3/2018 6:30 PM, Clifford Novey wrote:
> > I am not sure if I did during first install. I did try it sometime after.
> > Does it require fresh install to be effective?
> > Thanks
> > Clifford
> >
> > On Mon, Sep 3, 2018, 3:04 PM Mike <mm at midnighteng.com> wrote:
> >
> >> Did you follow these instructionsfrom the readme ?
> >>
> >>
> >>
> http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme
> >>
> >> Run the following commands after the first time you boot.
> >>
> >> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel
> >> sudo apt-get update
> >> sudo apt-get upgrade -y
> >> sudo reboot
> >>
> >> at the # prompt run "asl-menu" to setup your node.
> >>
> >>
> >> ...mike/kb8jnm
> >>
> >> On 9/3/2018 5:19 PM, Clifford Novey wrote:
> >>> Pi stretch, stock allstar install and allmon2. Using asl-menu I get
> this
> >>> message. Have tried to create the dir w diff permissions and owners. I
> >> use
> >>> pi not root for main user. Ideas as to how I can solve or what the core
> >>> issue may be?
> >>> Thanks
> >>> Clifford
> >>> KK6QMS
> >>>
> >>> IAX2 show registry:
> >>> Unable to connect to remote asterisk
> (does/var/run/asterisk/asterisk.ctl
> >>> exist?)
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at lists.allstarlink.org
> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>> To unsubscribe from this list please visit
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> >> scroll down to the bottom of the page. Enter your email address and
> press
> >> the "Unsubscribe or edit options button"
> >>> You do not need a password to unsubscribe, you can do it via email
> >> confirmation. If you have trouble unsubscribing, please send a message
> to
> >> the list detailing the problem.
> >>>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at lists.allstarlink.org
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> >> scroll down to the bottom of the page. Enter your email address and
> press
> >> the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> >> confirmation. If you have trouble unsubscribing, please send a message
> to
> >> the list detailing the problem.
> >>
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180903/6d3aa651/attachment.html>