[App_rpt-users] failed to connect error message

[Stephen Curtis]

Hi George,

If these two nodes are both internal on the same network. Have you added them both to the nodes stanzas in rpt.conf?

Cheers
Steve

> On 9 Sep 2018, at 17:27, George Csahanin <george at dyb.com> wrote:
> 
> Trying to connect from 28599 (192.168.1.107) to 2428 (192.168.1.73) I get the following failure message on 2428:
> 
>     -- Accepting UNAUTHENTICATED call from 192.168.1.107:
>        > requested format = gsm,
>        > requested prefs = (gsm|ilbc|g726aal2|ulaw),
>        > actual format = g726aal2,
>        > host prefs = (g726aal2|gsm),
>        > priority = mine
>     -- Executing [2428 at radio-secure:1] Rpt("IAX2/192.168.1.107:4571-5221", "2428") in new stack
> [Sep  9 11:49:25] WARNING[24760]: app_rpt.c:22701 rpt_exec: Reported node 28599, name none cannot be found!!
>   == Spawn extension (radio-secure, 2428, 1) exited non-zero on 'IAX2/192.168.1.107:4571-5221'
>     -- Hungup 'IAX2/192.168.1.107:4571-5221'
> 2428*CLI>
> 
> Again, a head scratcher for me. As I get older this is more frequent...
> 
> GeorgeC W2DB
> 
> 
> 
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.