[App_rpt-users] ASL on RPi 3 with WiFi

[JJC]

Bob, this is not a matter of ASL supporting it but rather a matter of the
underlying operating system.  I can't speak to the .img that is pre-built
but I will say that if you use a vanilla version of Raspbian and go from
there (following the directions of how to setup the supplicant and all the
requisite things) then it should work....
https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

Of course not using the supplied image also may come with it's own
challenges too...

JJC
N0PKT

On Fri, Sep 28, 2018 at 3:50 PM Bob Pyke <k6ecm1 at gmail.com> wrote:

> Does ASL support the RPi 3 WiFi? If so, what do I need to know to set it
> up. I didn’t find any info on the wiki.
>
> Thanks,
> Bob
> K6ECM
>
> Sent from iPad
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180928/8adf2e36/attachment.html>