[App_rpt-users] Zopier

[Mike]

Tom,

It would be the same for any VOIP app.

You must have 'PHONE CONTROL' commands set-up in rpt.conf

So, if you have the proper set-up in extensions.conf, and after initial 
log-in to the server,

you would first connect to the node# by dialing the node#.

Then use the phone control commands from your command list. See wiki.

...mike/kb8jnm

On 4/7/2019 12:22 PM, TGundo 2003 wrote:
> Morning all!
>
> I'm trying to setup Zopier to use my iOS devices with my allstar node. 
> I use iaxrpt with much success on Windows. I was able to get the 
> Zopier configured to successfully register, but how do you actually 
> "use" it to connect, be able to transmit, etc? Seems litl you have to 
> dial something to make it "call"?
>
> Any help is appreciated!
> Thanks!
>
> Tom
> W9SRV
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190407/c1adaa86/attachment.html>