[App_rpt-users] Asterisk unable to start

Tue Aug 20 22:17:01 UTC 2019

Once you mark the kernel and headers, you can apt-get update and apt-get 
upgrade to your hearts content. The headers and kernel will not change.

Steve N4IRS

On 8/20/19 10:38 AM, Lu V wrote:
> So I might have learned something.  Hear me out and tell me if I am on 
> the right track?
> In the readme of the ASL image  it says:
> "There may have been updates to the operating system and AllStarLink 
> since this image was built.
> Run the following commands after the first time you boot.
>
> sudo  raspberrypi-kernel-headers raspberrypi-kernel
> sudo apt-get update
> sudo apt-get upgrade -y
> sudo reboot"
>
> I never did any of these.. Is the "*apt-mark hold" *a permanent way to 
> prevent the kernel from being upgraded?
> Or is it just temporary?
> And just to make sure, we should always run the update and upgrade 
> going forward? (With the mark hold)
>
> On Tue, Aug 20, 2019 at 7:39 AM David McGough <kb4fxc at inttek.net 
> <mailto:kb4fxc at inttek.net>> wrote:
>
>
>     Lu,
>
>     I see from an earlier post that you're running a 4.19.66-v7+ kernel
>     version. That's the issue. You must have inadvertently upgraded
>     the kernel
>     when updating Linux.
>
>     The symptom you're describing (the /dev/dahdi folder completely
>     missing)
>     is explained by missing dahdi drivers.
>
>     The simplest solution is to down-grade your kernel to the previous
>     version, which should already have drivers present. That kernel and
>     supporting files are still probably installed, just inactive.
>
>     73, David KB4FXC
>
>
>     On Tue, 20 Aug 2019, Lu V wrote:
>
>     > Interesting discovery. My /dev/dahdi directory is completely
>     missing.
>     Iâ€™m beginning to wonder if my sd card is in trouble.
>     I thought I might try to copy that directory from another working
>     image but it wonâ€™t let me.
>
>     Sent from my iPhone, Lu Vencl
>
>     > On Aug 19, 2019, at 4:39 PM, David McGough <kb4fxc at inttek.net
>     <mailto:kb4fxc at inttek.net>> wrote:
>     >
>     >
>     > Hi Lu,
>     >
>     > I'm not maintaining that code, so I'm not sure where the latest ASL
>     > version is.  I guess it's here: https://github.com/AllStarLink/DAHDI
>     >
>     > What is the kernel version you're running, at this point?? You
>     can find
>     > this by going to a bash shell prompt and typing:
>     >
>     > cat /proc/version
>     >
>     > 73, David KB4FXC
>     >
>     >
>     >
>     >> On Mon, 19 Aug 2019, Lu V wrote:
>     >>
>     >> Can you offer me some direction as to how I can build dahdi
>     from the sources?
>     >> Thanks
>     >>
>     >> Sent from my iPhone, Lu Vencl
>     >>
>     >>> On Aug 19, 2019, at 12:47 PM, JJC <cummingsj at gmail.com
>     <mailto:cummingsj at gmail.com>> wrote:
>     >>>
>     >>> You can also build dahdi from the sources, this is what I do
>     so that I can have the benefit of an updated and more secure and
>     reliable kernel
>     >>>
>     >>> Sent from the iRoad
>     >>>
>     >>>> On Aug 19, 2019, at 10:26, David McGough, KB4FXC
>     <kb4fxc at gmail.com <mailto:kb4fxc at gmail.com>> wrote:
>     >>>>
>     >>>> Looks like the dahdi kernel module isn't loading. Did the
>     kernel get updated? If so, revert back to the old kernel or
>     recompile dahdi.
>     >>>>
>     >>>>
>     >>>> 73, David KB4FXC
>     >>>>
>     >>>>
>     >>>>> On Mon, Aug 19, 2019 at 11:40 AM Lu V <luvencl8 at gmail.com
>     <mailto:luvencl8 at gmail.com>> wrote:
>     >>>>> Well this is the first this has happened to me on a pi install.
>     >>>>> I had replaced a router and needed to restart my node. I
>     used shutdown -r now command and now asterisks will not start.
>     >>>>> I get:
>     >>>>> Unable to connect to remote asterisk (does
>     /var/run/asterisk.ctl exist?)
>     >>>>> root at repeater:/home/repeater#
>     >>>>>
>     >>>>> So if I execute with asterisk -vvvvvvc I get this output.
>     See attached file.
>     >>>>> Can someone advise what might be happening before I give up
>     and reimage this node?
>     >>>>> Thanks.
>     >>>>> Lu
>     >>>>> KA4EPS
>     >>>>> _______________________________________________
>     >>>>> App_rpt-users mailing list
>     >>>>> App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     >>>>>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     >>>>>
>     >>>>> To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     >>>>> You do not need a password to unsubscribe, you can do it via
>     email confirmation. If you have trouble unsubscribing, please send
>     a message to the list detailing the problem.
>     >>>> _______________________________________________
>     >>>> App_rpt-users mailing list
>     >>>> App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     >>>>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     >>>>
>     >>>> To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     >>>> You do not need a password to unsubscribe, you can do it via
>     email confirmation. If you have trouble unsubscribing, please send
>     a message to the list detailing the problem.
>     >>> _______________________________________________
>     >>> App_rpt-users mailing list
>     >>> App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     >>>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     >>>
>     >>> To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     >>> You do not need a password to unsubscribe, you can do it via
>     email confirmation. If you have trouble unsubscribing, please send
>     a message to the list detailing the problem.
>     >>
>     >
>     > _______________________________________________
>     > App_rpt-users mailing list
>     > App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     >
>     > To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     > You do not need a password to unsubscribe, you can do it via
>     email confirmation. If you have trouble unsubscribing, please send
>     a message to the list detailing the problem.
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190820/3cf38099/attachment.html>