[App_rpt-users] CM119 USB interface
Mike
mm at midnighteng.com
Tue Jan 1 17:33:44 UTC 2019
Mark,
I will have to insist we are not fixing/testing a hamvoip version.
Not to be coy, just I don't know the differences and don't want to waste
my time or yours.
...mike/kb8jnm
On 1/1/2019 12:26 PM, Mark DuMoulin wrote:
> Mike,
>
> Thanks for the reply. Here is what I have in the HamVoip RC.19
>
> Rpt.conf
>
> [1400] ; Change this to your assigned node number
>
> ; Channel Driver settings
> ; Define a channel driver to use and which
> ; interface within that channel driver
> ; To define a radioless node use the
> ; psuedo channel driver - rxchannel=dahdi/pseudo
> rxchannel=Radio/usb1400
> ; Example usbradio channel driver
> ;rxchannel=SimpleUSB/usb
> ; Example simpleusb channel driver
> ;rxchannel=dahdi/pseudo
> ; Example pseudo channel driver
>
> List of programs in asterisk
>
> [root at 1400_Home_Test asterisk]# ls
> amd.conf indications.conf
> asterisk.conf local
> chan_dahdi.conf logger.conf
> dnsmgr.conf manager.conf
> dundi.conf modules.conf
> echolink.xxx rpt.conf
> extensions.conf rpt.conf.sample
> extensions.conf_2018.12.30.2105 rpt.conf_2018.12.30.2105
> extensions.conf_2018.12.30.2113 rpt.conf_2018.12.30.2113
> extensions.conf_2018.12.30.2114 rpt.conf_2018.12.30.2114
> extensions.conf_orig rpt.conf_orig
> features.conf simpleusb.conf
> iax.conf simpleusb.conf_2018.12.30.2113
> iax.conf_2018.12.30.2105 simpleusb.conf_2018.12.30.2115
> iax.conf_2018.12.30.2113 simpleusb_tune_usb.conf
> iax.conf_2018.12.30.2114 sip.conf
> iax.conf_orig usbradio.conf.xxx
>
> usbradio.conf.xxx
>
> ; Usbradio channel driver Configuration File
> ;
>
> [general]
>
> [usb1400]
>
> hdwtype=0
> rxboost=1
> txboost=1
> rxctcssrelax=1
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> ;rxctcssoverride=0
> carrierfrom=dsp
> ctcssfrom=dsp
> rxdemod=flat
> txprelim=yes
> txlimonly=no
> txtoctype=notone
> txmixa=composite
> txmixb=0
> invertptt=0
> duplex=1
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
>
> #includeifexists custom/usbradio.conf
>
> Modules.conf
>
> ;
> ; Asterisk configuration file
> ;
> ; Module Loader configuration file
> ;
>
> [modules]
> autoload=yes
> ;noload=chan_voter.so
> ;noload=chan_usbradio.so
> ;noload=chan_irlp.so
> ;noload=chan_echolink.so
> ;noload=chan_simpleusb.so
> noload=app_hamvoip.so
>
> ;noload=res_crypto.so
> ;noload=func_callerid.so
> noload=chan_oss.so
> noload=chan_alsa.so
> noload=chan_phone.so
> noload=res_config_pgsql.so
> noload=cdr_pgsql.so
> noload=app_radbridge.so
> noload=app_festival.so
> noload=app_queue.so
> noload=func_odbc.so
> noload=chan_mgcp.so
> noload=chan_skinny.so
> noload=cdr_custom.so
> noload=cdr_csv.so
> noload=chan_agent.so
> noload=chan_simple2.so
> noload=func_moh.so
> noload=res_musiconhold.so
> noload=res_speech.so
> noload=res_odbc.so
> noload=res_smdi.so
> noload=res_config_odbc.so
> noload=chan_tlb.so
> noload=app_milliwatt.so
> noload=app_image.so
> noload=app_sendtext.so
> noload=format_h264.so
> noload=app_hasnewvoicemail.so
> noload=app_ices.so
> noload=app_lookupblacklist.so
> noload=app_voicemail.so
> noload=chan_usrp.so
> noload=app_lookupidname.so
> noload=app_zapateller.so
> noload=format_jpeg.so
> noload=app_parkandannounce.so
> noload=app_meetme.so
> noload=app_settransfercapability.so
> noload=app_amd.so
> noload=app_followme.so
> noload=app_transfer.so
> noload=app_directed_pickup.so
> noload=app_flash.so
> noload=app_page.so
> noload=app_gps.so
> noload=pbx_dundi.so
> noload=app_setcallerid.so
> noload=app_dictate.so
> noload=res_adsi.so
> noload=app_mp3.so
> noload=app_privacy.so
> noload=app_disa.so
> noload=app_alarmreceiver.so
> noload=app_externalirv.so
> noload=chan_beagle.so
> noload=chan_sip.so
> [global]
>
> -----Original Message-----
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Mike
> Sent: Tuesday, January 01, 2019 11:10 AM
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] CM119 USB interface
>
> Mark,
>
> Can you show me the line in your rpt.conf where you are loading the channel.
>
> ie rxchannel = Radio/usb_29285
>
> And your usbradio.conf file text
>
>
> ...mike/kb8jnm
>
> What
>
> On 1/1/2019 9:19 AM, Mark DuMoulin wrote:
>> Kevin,Brian;
>>
>> I have been trying to set up use of radiousb instead of simpleusb. I see here Brian is doing that with the issues he is having.
>> I can't get nearly that far.
>> I am running hamvoip rc19 on some and recently downloaded stretch.
>> In both cases I set the usbradio module to load however I cannot get the driver to work and keep getting asterisk failures.
>> Additionally the menus set up by the programmer show only simpleusb-radio-tune not radio-tune-menu.
>> Is there another image or procedure I need to run to get this started?
>>
>> Tnx,
>> Mark
>> WB2ERS
>>
>> -----Original Message-----
>> From: App_rpt-users
>> [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of
>> Kevin Custer
>> Sent: Monday, December 24, 2018 2:57 PM
>> To: Users of Asterisk app_rpt; Brian G
>> Subject: Re: [App_rpt-users] CM119 USB interface
>>
>> On 12/24/2018 12:21 AM, Brian G wrote:
>>> Ok, I'm thick sometimes :) I get what you're saying now, makes sense.
>>> Thank you for the clarification. The Motorola is working as you
>>> described, the other rigs not so much.
>>>
>>> So the gist of it is, there's no way to use DSP carrier detect
>>> without using discriminator audio? It's CTCSS or VOX only in that case?
>> Correct -
>>
>> BUT, discriminator audio should be available from that M120 radio. You just have to hook it up and possibly program it correctly.
>>
>> Kevin
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
More information about the App_rpt-users
mailing list