[App_rpt-users] Remote Base Questions

[Rachel Olivero]

All,

I'm revisiting this in case anyone else runs into the trouble. (Thanks to Mike for earlier troubleshooting help.) The final result was a couple settings in rpt.conf ended up needing to be tweaked:

duplex=0
linktolink=yes

This resulted in the behavior I was looking for. Now, if I could figure out why the transmit audio is so low...

73,
Rachel AD9O


On Sat, Jan 5, 2019, at 15:30, Rachel Olivero wrote:
> 
> 
> On Sat, Sep 1, 2018, at 20:12, Rachel Olivero wrote:
>> Good evening all:
>> 
>> I presently have my TM-D700 connected to a Raspberry Pi with a URI and configured as a remote base. I'm using iaxRpt to control/use it. 
>> 
>> I'm noticing that if there is received audio and I transmit, everything works fine. When I unkey, I get the repeater audio immediately back over iaxRpt. However, if I transmit to a repeater that has had no carrier previously, I don't hear any returned audio. I've stood next to the radio and verified that I am keying the repeater. Tonight, a station responded and I got no audio until the carrier dropped and a new signal was detected. I'm not sure if this is a D700 issue, a URI issue, or an app_rpt issue. I'm open to any suggestions.
>> 
>> One other question, I defined an archivedir in rpt.conf, but I don't see audio files in the directory. I see the promised text file, but no audio. Did I miss a step?
>> 
>> Thanks,
>> Rachel AD9O
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190105/cdf11af3/attachment.html>