[App_rpt-users] iaxRPT on Win10 and a massive headache

[Lu V]

Zoiper has no PTT. Vox or dtmf operation would be required. 
But as I mentioned in another reply, I had seen this just the other day. Make sure the driver is actually enabled, and be sure you are sleeting the right device. It might seem correct but it may not be the correct one. Also try using the windows 10 sound troubleshooter which will go through and check some things for you. After all of that I got it working.
I think I ended up using soundmapper and USB mic. 

Sent from my iPhone, Lu Vencl
KA4EPS

> On Jul 21, 2019, at 7:30 PM, Ed Wilhelm <vacuumtubesforever at gmail.com> wrote:
> 
> It is. The level is also turned up in the 'app volume and sound device preferences". Pointing at same device as the browser which will play youtube audio through speakers nicely.
> 
> The other problem with it not keying things up or showing any activity on Asterisk CLI with PTT is vaguely familiar. Had something like that long time ago and just can't remember the details.
> 
> Comparing his settings with mine, can't find any differences. Got to be something really stupid I'm just not seeing.
> 
> BTW, have played with Zoiper in the past, not too impressed.
> 
> Ed W8VT
> 
>> On 7/21/19 7:10 PM, Martin Boroff wrote:
>> Are you sure IAXRPT client is pointing to the mic and speakers? Are mic and speakers default sound devices?
>> 
>> 73, Marty WD9GYM
>> 
>> Sent from my iPhone
>> 
>>> On Jul 21, 2019, at 4:04 PM, Ed Wilhelm <vacuumtubesforever at gmail.com> wrote:
>>> 
>>> I am quite befuddled at this point.
>>> 
>>> Have had iaxRPT running on my nodes for quite sometime and I have a couple Win10 laptops that work just fine with it. Never a problem.
>>> 
>>> Buddy is getting ready to go on some extended travels and wanted to use iaxRPT to connect with my node and stay in touch.
>>> 
>>> Can not get it to work on his laptop. Can not get audio to his speakers. Shows on iaxRPT VU but can not get it to speakers.
>>> 
>>> Yes, audio per app is turned up in settings.
>>> 
>>> Second issue, will not key up anything on network. PTT goes red but nothing else happens. Looking at Asterisk CLI on my node see no activity at all when he tries to transmit. He is another city so we have been doing this via phone and Teamviewer.
>>> 
>>> All of his settings match the ones that I'm using on my Win10 machine as far as I can see.
>>> 
>>> Have tried running as administrator, compatibility mode and turning firewall off for giggles.
>>> 
>>> Probably something really stupid, but I'm overlooking it.
>>> 
>>> Hope one of our resident gurus may have an idea.
>>> 
>>> Going to go take a couple Tylenol's now.
>>> 
>>> Ed W8VT
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.