[App_rpt-users] ASL SETUP

[Pierre Martel]

are you trying to connect to the server in ssh with root login?? did you
enabled root login in sshd config?

About the audio out, what output did he used? LEFT? RIGHT? usb fob or uri-x
or rim ?  you can check in usbradio.conf to see wich one as voice or
composite. this could help..





Le sam. 27 juil. 2019 à 10:27, Len Griffin <lengriff at optimum.net> a écrit :

> I am trying to help a friend with a first-time Allstar setup by creating a
> step-by-step guide. I’m following the ‘ Beginners Guide ‘ from the Wiki.
>
> All went well until the radio-tune-menu. Step 1 OK. Step 2 OK, plenty of
> noise level and squelch set. Step 3 – set rx voice level – there is no
> level at all, no matter what number I use.
>
> Secondary issue..I cannot connect with SSH ( WinSCP ).
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190727/f71f92a6/attachment.html>