[App_rpt-users] What exactly is a node in AllStarLink

Bob Pyke k6ecm1 at gmail.com
Sat Mar 16 10:12:18 UTC 2019


A node is an internet connection identifier  (a number). It has no more than one public IP associated with it, but one public IP number can have multiple node numbers when using port forwarding in a NAT router. Node numbers for public access are assigned by Allstarlink, whereas a private node is unassigned, and must be numerically less than 2000 and not registered in AllstarLink by the node 

A node can have no radio (known as a hub and other nodes can connect (link) to it over the internet as a central connection point),  or one radio (a repeater). Since private nodes are not registered, a connecting node at a different IP address must be told (hard coded in its config file), how to locate it. A node can have SIP access (a hub or repeater), as in using an internet connected VoIP phone to control (using DTMF commands) or use the node to connect to and interface with other nodes by linking them together using DTMF commands (ie from a iPhone using Zoiper, or iaxRpt on an android phone or computer that is internet connected).

I do not recognize your port types, but AllstarLink software is designed to interface with specific interface hardware such as the DMk engineering URIx, or any number of modified USB audio interfaces based on the CM119 chip family.

See https://wiki.allstarlink.org/wiki/Main_Page

Hope this helps.

Thanks,
Bob
K6ECM

Sent from iPad


> On Mar 16, 2019, at 12:24 AM, Eric Fort <eric.fort.listmail at fortconsulting.org> wrote:
> 
> Could someone help me get a better idea of the concept of what a node is in asterisk/app_rpt/all star terminology.  I have a computer with 4 radio ports, an fxo port, an fxs port, and an Internet connection which allows connection to any number of endpoints over sip or iax.  Now what is a node?  I’d like to be able via DTMF to bring one or more radios on and off link.  Some of my understanding that needs to happen here is how AllStarLink is architected but also relating concepts to what I know and am familiar with which is a network of linked remotes (anyone here a cactus member or at least familiar with how a srs controller is architected as an 8x8 full duplex audio switch matrix. ) where a remote may have up to 8 radios and each of those can be linked or unlinked individually to any one or more of the other 8.  Finally, how does AllStarLink prevent loops in routing?  I know this seems odd at first glance but I can easily foresee audio from one source being linked to multiple places and those sources being mixed and linked back in a twisted mess. Please help me to understand
> 
> Af6ep
> 
> Sent using SMTP.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190316/6b84426f/attachment.html>


More information about the App_rpt-users mailing list