[App_rpt-users] DTMF issue on DMR

[Skyler F]

See if asterisk is decoding any of the touchtones in the cli. “asterisk
-vvvvvvvvr” then type the tones and see if anything is happening


On Sat, May 4, 2019 at 12:52 PM kc9mnl at gmail.com <kc9mnl at gmail.com> wrote:

> Hello all,
> I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73,
> Steve
> KC9MNL
> Node #27575
> Sorry if this is a duplicate post. I'm having trouble with my phone.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190506/7179347e/attachment.html>