<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.16809" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Just did some more investigating. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I can control frequency and mode now, just fine.
</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Can't control PL on/off, PL Freq, repeater offset
(I thought that worked from preset channels in rpt.conf, but it was auto
repeater offset doing that)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>And then the PTT. I'll guess I can usbfob that PTT,
like I did the UHF node radio. But when I discovered that the AM tune (*79)
(case 119) put it into transmit, I figured that was the PTT mode select, over a
serial port command (0x88, or was it 0x08...one's on one's off). I see PTT Off
in the source, not on. So just need that clarfied. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I can hook the radio up to HamradioDeluxe and it
controls fine. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Are there any serial port controls, parity, stop
bits, word length, etc? That could impact this somehow.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My rpt.conf remote stanza, <STRONG>bold</STRONG>
ones work, others readback as though they worked (double beep or speech) but
have no effect on the radio:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><STRONG>0=remote,1 ; Retrieve Memory MM
(*000-*099) (Gets memory from rpt.conf)<BR>1=remote,2 ; Set freq. VFO
MMMMM*KKK*O (Mhz digits, Khz digits, Offset)</STRONG><BR>2=remote,3
; Set tx PL tone PL Tone HHH*D*<BR>3=remote,4 ; Set rx PL tone<BR>40=remote,100
; Rx PL off<BR>41=remote,101 ; Rx PL on<BR>42=remote,102 ; Tx PL
off<BR>43=remote,103 ; Tx PL on<BR>44=remote,104 ; Low Power<BR>45=remote,105 ;
Medium Power<BR>46=remote,106 ; High Power<BR><STRONG>711=remote,107 ; Bump
20<BR>714=remote,108 ; Bump 100<BR>717=remote,109 ; Bump 500<BR>713=remote,110 ;
Bump +20<BR>716=remote,111 ; Bump +100<BR>719=remote,112 ; Bump
+500<BR>721=remote,113 ; Scan slow<BR>724=remote,114 ; Scan
quick<BR>727=remote,115 ; Scan fast<BR>723=remote,116 ; Scan +
slow<BR>726=remote,117 ; Scan + quick<BR>729=remote,118 ; Scan +
fast<BR>79=remote,119 ; Tune (brief AM transmission for
automatic<BR>
;antenna tuner)<BR>51=remote,5 ; Long status query<BR>52=remote,140 ; Short
status query<BR>67=remote,210 ; Send a *<BR>69=remote,211 ; Send a
#<BR>6=remote,6
; Set mode</STRONG></FONT></DIV>
<DIV><FONT face=Arial size=2><STRONG></STRONG></FONT> </DIV>
<DIV><FONT face=Arial size=2>The Yaesu Opcodes that don't function are all over
0x08</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></FONT></DIV></BODY></HTML>