<div>BTW i just updated node 2181 using the update script</div>
<div> </div>
<div>i went from 0.174 to 0.203</div>
<div> </div>
<div>remotely via ssh, seamed to go fine i guess time will tell.</div>
<div> </div>
<div>seems i am always behind. hihi! </div>
<div> </div>
<div>the new rebuilt 2180 node was a raw install from the </div>
<div>latest DL iso.<br clear="all">--<br>Thanks in Advance<br><br> Bob Brown, WØNQX<br><br> Kansas City Metro Area<br><br> <a href="http://sm0kenet.net">http://sm0kenet.net</a><br><br> <a href="http://byrg.net">http://byrg.net</a><br>
<br> <a href="http://kcdstar.byrg.net">http://kcdstar.byrg.net</a><br><br>"Surely you can't be serious?" "Of course I am, and don't call me Shirley."<br> <br><a href="http://www.brainyquote.com/quotes/authors/j/jonathan_swift.html" target="_blank">Jonathan Swift</a> - "May you live every day of your life." <br>
<br></div>
<div class="gmail_quote">On Thu, Sep 17, 2009 at 00:00, Stephen Rodgers <span dir="ltr"><<a href="mailto:hwstar@rodgers.sdcoxmail.com">hwstar@rodgers.sdcoxmail.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote"><br>ACID 0.9 can be downloaded from <a href="http://dl.allstarlink.org/" target="_blank">dl.allstarlink.org</a>.<br>
<br>This is based on Centos 5.3,<br><br>ACID version 0.9 contains:<br><br>app_rpt.c version 0.203:<br><br>1. Added tone burst detection for our European friends.<br>2. Fixed W9SH's audio format mismatch on startup bug (very unusual config)<br>
3. Added check for RPT_A version of zaptel.(We need this to fix<br>autopatch call progress issues)<br>4. Fixed strange keying problem with new version of IAXRPT.<br>5. Fixed more hang problems and unreliability with simplex<br>
repeater/remote base nodes<br>6. Fixed telemetry propagation when downrev (non-newkey1) systems present<br>7. Fixed irlp/echolink tx audio distortion at high gains<br>8. Resolve spurious time out message.<br>9. Fixed problems with simplex autopatch.<br>
10. Fixed serial rx hang problem with Kenwood remotes<br>11. Fixed problem with serial baud rate being wiped out on Kenwood<br>TMG-707 radios (using USB device).<br>12. Added delay statements to FT-897 serial commands on remote base<br>
bacause some FT897 radios do not accept the complete sequence of<br>commands without some delay between the commands.<br>13. Fixed Mantis bug 0000032: ID Talkover CW loops causes RX audio to chop<br>14. Add beaconing node stanza key to allow the repeater ID to be sent<br>
regardless of whether there has vin activity or not.<br>15. Fix "always enabled" bug with holdofftelem feature.<br>16. Add nounkeyct and holdofftelem node stanza confiiguration options.<br>17. Add COP functions 49 (NOICE) and 50 (NOICD) to enable and disable<br>
all Allstar, Echolink and IRLP connections.<br>18. Fixed telemetry control parameters.<br>19. Resolve mantis bug 0000016: Quick unkeys and rekeys over the network<br>queue a link Courtesy Tone<br>20.Add nolocallinkct key to node stanza so that nodes co-hosted on the<br>
same server can optionally send no link courtesy tone.<br>21. Added arbitary tone generation as COP function 48.<br>22.Add link activity timer function to resolve Mantis feature request<br>0000010.<br>23. Better control of IRLP connect and disconnect messages through<br>
config file options and DTMF commands, and added irlpplay CLI command to<br>assist in queuing the messages one at a time.<br>24. Fixed Mantis bug 0000011 pad test broken<br>25. Fixed Mantis bug 0000004 out-of-band telemetry sent when link in<br>
monitor<br>26.Added antenna select for FT-950<br>27. Cleaned up debug messages for FT-950<br>28, Added FT-950 support<br>29. Fix alarm setup with multiple uChameleons<br><br>chan_irlp.c version 0.27:<br><br>1, Fixed problem with enabling and disabling irlp connect/disconnect<br>
announcement mmessages. Use irlpplay Asterisk cli command.<br>2, Don't update DB when operating in experimental reflector mode.<br>3. Resolve Mantis bug 0000001 by disabling Asterisk's DTMF decoder on<br>IRLP incoming audio.<br>
4. Major changes to add experimental reflector support and ability to<br>connect to expermental reflectors.<br><br><br>chan_echolink.c version 0.21:<br><br>1, Resolved Mantis Bugs 0000026 and 0000038<br>2, Failure to connect to certain Echolink nodes.<br>
3, Removed multiple initial packets.<br><br>chan_usbradio.c/xpmr has been updated:<br><br>1, CM108AH (new uri) support<br>2, Add support for CM119 sound chips<br>3, Improve carrier squelch operation.<br>4. Allow for hot plug functionallity of USB devices<br>
5. Add rxontime parameter for simplex nodes. (anti-pingpong)<br>6. Fix TX hang problem.<br>7. Resolve Segfault when txmixa=voice and txtone is set to zero.<br>8. Sync with Xelatec version. Add TX blanking time.<br>9. Fixed mode steering problem and clipping in xpmr<br>
<br><br><br>Final Note: Someone needs to test the astupd feature on older ACID<br>installs and either say it works or doesn't work. Do not use astupd on<br>older installs until we have confirmation that it is working, play it<br>
safe and do a complete install from CD unless this is reported to be<br>working from several sources.<br><br>Steve<br>WA6ZFT<br>_______________________________________________<br>App_rpt-users mailing list<br><a href="mailto:App_rpt-users@qrvc.com">App_rpt-users@qrvc.com</a><br>
<a href="http://qrvc.com/mailman/listinfo/app_rpt-users" target="_blank">http://qrvc.com/mailman/listinfo/app_rpt-users</a><br></blockquote></div><br>