First look at this link.<br><br><a href="http://www.cfreeze.com/trac/stormsiren/">http://www.cfreeze.com/trac/stormsiren/</a><br><br>This might make writing the code easier.<br><br>Hey Kan, Sorry if my last email was a little hard. Yep I under stand that you want the S.A.M.E. alert to trigger a different courtesy tone. I don't write the code for APP_RPT but lets look at what you and others would want for the S.A.M.E. alert.<br>
<br>When the S.A.M.E. alert is triggered<br><br>1) Record the alert so it can be played back by a dial plan or connect to a Rx radio with updated info.<br>2) Connect to a node and Tx the audio alert (maybe use a different PL code)<br>
3) Text to speech for the coded message.<br>4) Program more then one S.A.M.E. alert code <br>5) Allow admins to configure S.A.M.E. alert code to connect to different nodes.<br>6) Change courtesy tones.<br>7) Play coded message any 1-10 minutes. (TORNADO)<br>
10) Dial plan to reset S.A.M.E. alert.<br><br>May guess is that if you have a S.A.M.E. alert radio and URI I would try to fine the COS or COR and just play with that first. I would think that you should be able to find a S.A.M.E. alert radio that has output for COS or COR and the TEXT data. If you have that I think you could make it very simple for the code writers.<br>
<br><br><div class="gmail_quote">On Fri, Jul 23, 2010 at 8:54 AM, Ken <span dir="ltr"><<a href="mailto:ke2n@cs.com">ke2n@cs.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">We get some very localized storms here and my repeater mainly covers
2 counties whereas, the local NWS transmitter (MAN) covers ~15 counties</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a href="http://www.erh.noaa.gov/lwx/nwr/nwrmap.htm" target="_blank">http://www.erh.noaa.gov/lwx/nwr/nwrmap.htm</a></span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> … but more than that, I would like the repeater
courtesy tone, or tail message, to change when an alert is active. And it
should state what the problem is: ‘severe thunderstorm warning’ or ‘tornado
watch’ and so forth.</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">This is important because the NWS just triggers the alarm once
and leaves it up for several hours. If you missed the initial message, you are
out of luck. And I don’t want to listen to the weather 24/7 – only to
be advised when something is about to hit. </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">There was another machine around here with an RLC
controller and one of those $500 CAT weather radios that did exactly this.
Asterisk should be smart enough to do the same. It is always looking for DTMF digits,
it should be able to find SAME codes …</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">73</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">Ken</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-width: medium medium medium 1.5pt; border-style: none none none solid; border-color: -moz-use-text-color -moz-use-text-color -moz-use-text-color blue; padding: 0in 0in 0in 4pt;">
<div>
<div style="border-width: 1pt medium medium; border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; padding: 3pt 0in 0in;">
<p class="MsoNormal"><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:shawpbx@gmail.com" target="_blank">shawpbx@gmail.com</a>
[mailto:<a href="mailto:shawpbx@gmail.com" target="_blank">shawpbx@gmail.com</a>] <b>On Behalf Of </b>David KE6UPI<br>
<b>Sent:</b> Friday, July 23, 2010 11:16 AM<div><div></div><div class="h5"><br>
<b>To:</b> Ken<br>
<b>Subject:</b> Re: [App_rpt-users] can App_Rpt decode SAME weather codes?</div></div></span></p>
</div>
</div><div><div></div><div class="h5">
<p class="MsoNormal"> </p>
<p class="MsoNormal" style="margin-bottom: 12pt;">Yes Ken I understand how
S.A.M.E. works, but don't see how a wide area repeater would care. I was
thinking of using S.A.M.E. on my repeater and found that I get the same
S.A.M.E. info for all of the San Diego county area. Not just one little area.
So playing around with a NWR radio hooked up to a URI did work, I couldn't find
any real use for it. If you going to leave your Ham radio on next to your bed
to listen to your repeater with the weather alert you might as well use a
S.A.M.E. radio.<br>
<br>
David</p>
<div>
<p class="MsoNormal">On Thu, Jul 22, 2010 at 2:13 PM, Ken <<a href="mailto:ke2n@cs.com" target="_blank">ke2n@cs.com</a>> wrote:</p>
<div>
<div>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">SAME is the protocol that NWR uses</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">We are looking for more than just an
alert tone, but actually the data that tells you what area the warning is for
–</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">It is AFSK - like packet radio</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a href="http://en.wikipedia.org/wiki/Specific_Area_Message_Encoding" target="_blank">http://en.wikipedia.org/wiki/Specific_Area_Message_Encoding</a></span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">Ken</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-width: medium medium medium 1.5pt; border-style: none none none solid; padding: 0in 0in 0in 4pt; border-color: -moz-use-text-color -moz-use-text-color -moz-use-text-color blue;">
<div>
<div style="border-width: 1pt medium medium; border-style: solid none none; padding: 3pt 0in 0in; border-color: -moz-use-text-color;">
<p class="MsoNormal"><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:shawpbx@gmail.com" target="_blank">shawpbx@gmail.com</a> [mailto:<a href="mailto:shawpbx@gmail.com" target="_blank">shawpbx@gmail.com</a>] <b>On
Behalf Of </b>David KE6UPI<br>
<b>Sent:</b> Thursday, July 22, 2010 4:50 PM<br>
<b>To:</b> Ken</span></p>
<div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt;"><br>
<b>Subject:</b> Re: [App_rpt-users] can App_Rpt decode SAME weather codes?</span></p>
</div>
</div>
</div>
</div>
<div>
<div>
<p class="MsoNormal"> </p>
<p class="MsoNormal" style="margin-bottom: 12pt;">Would
it be easyer to use NWR then S.A.M.E. NWR uses 1050hz tone. Or buy a cheap
S.A.M.E. radio and find a the cos or cor.<br>
<br>
<a href="http://www.nws.noaa.gov/nwr/same.htm" target="_blank">http://www.nws.noaa.gov/nwr/same.htm</a><br>
<br>
The Kenwood TM-271 has the NWR built in.<br>
<br>
David</p>
<div>
<p class="MsoNormal">On
Thu, Jul 22, 2010 at 12:37 PM, Ken <<a href="mailto:ke2n@cs.com" target="_blank">ke2n@cs.com</a>> wrote:</p>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;">Well - there is a windoz program that does
it</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;"> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;"><a href="http://www.brothersoft.com/tonedecoder.net-standard-edition-211249.html" target="_blank">http://www.brothersoft.com/tonedecoder.net-standard-edition-211249.html</a></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;"> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;">but it is rather pricy ... apparently it
is hard to do ...</span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;"> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;"> </span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; color: black;">Ken</span></p>
</div>
<div>
<div>
<div>
<p class="MsoNormal"> </p>
</div>
<div>
<p class="MsoNormal"> </p>
</div>
<p class="MsoNormal" style="margin-bottom: 12pt;">-----Original
Message-----<br>
From: Jim Duuuude <<a href="mailto:telesistant@hotmail.com" target="_blank">telesistant@hotmail.com</a>><br>
To: <a href="mailto:jrorke@cogeco.ca" target="_blank">jrorke@cogeco.ca</a>;
app_rpt mailing list <<a href="mailto:app_rpt-users@qrvc.com" target="_blank">app_rpt-users@qrvc.com</a>><br>
Sent: Thu, Jul 22, 2010 2:28 pm<br>
Subject: Re: [App_rpt-users] can App_Rpt decode SAME weather codes?</p>
</div>
</div>
<div>
<div>
<div>
<div>
<p class="MsoNormal"><br>
as opposed to DIFFERENT weather alert protocol...<br>
or perhaps SIMILAR..... :-) :-)<br>
<br>
JIM WB6NIL<br>
> Date: Thu, 22 Jul 2010 13:12:14 -0400<br>
> From: <a href="mailto:jrorke@cogeco.ca" target="_blank">jrorke@cogeco.ca</a><br>
> To: <a href="mailto:app_rpt-users@qrvc.com" target="_blank">app_rpt-users@qrvc.com</a><br>
> Subject: [App_rpt-users] can App_Rpt decode SAME weather codes?<br>
> <br>
> Hi All just wondering if App_Rpt can or does support of decoding the <br>
> SAME weather alert protocol and signaling??<br>
> <br>
> Thanks,<br>
> <br>
> Jon VA3RQ<br>
> <br>
> <br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@qrvc.com" target="_blank">App_rpt-users@qrvc.com</a><br>
> <a href="http://qrvc.com/mailman/listinfo/app_rpt-users" target="_blank">http://qrvc.com/mailman/listinfo/app_rpt-users</a></p>
</div>
</div>
</div>
<p class="MsoNormal">=
</p>
</div>
<div><pre style="background: none repeat scroll 0% 0% white;"><tt><span style="color: black;">_______________________________________________ App_rpt-users mailing list <a href="mailto:App_rpt-users@qrvc.com" target="_blank">App_rpt-users@qrvc.com</a> <a href="http://qrvc.com/mailman/listinfo/app_rpt-users" target="_blank">http://qrvc.com/mailman/listinfo/app_rpt-users</a> </span></tt></pre>
</div>
<p class="MsoNormal" style="margin-bottom: 12pt;"><br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@qrvc.com" target="_blank">App_rpt-users@qrvc.com</a><br>
<a href="http://qrvc.com/mailman/listinfo/app_rpt-users" target="_blank">http://qrvc.com/mailman/listinfo/app_rpt-users</a></p>
</div>
<p class="MsoNormal"> </p>
</div>
</div>
</div>
</div>
</div>
</div>
<p class="MsoNormal"> </p>
</div></div></div>
</div>
</div>
</blockquote></div><br><div style="visibility: hidden; display: inline;" id="avg_ls_inline_popup"></div><style type="text/css">#avg_ls_inline_popup { position:absolute; z-index:9999; padding: 0px 0px; margin-left: 0px; margin-top: 0px; width: 240px; overflow: hidden; word-wrap: break-word; color: black; font-size: 10px; text-align: left; line-height: 13px;}</style>