<div>I am trying to add a playback fuction so I can add in a tail message telling everyone to press *50 for information, then use that to playback basic repeater command instructions. I have tested this several ways, and I can't seem to get it. Plus, during my testing, I think I set *50 to a *81# so it will tell me the time. It is no longer in the config, but it still does it, so I cant use *50. Here is a clip from my rpt.conf file.</div>

<div> </div>
<div>[functions27178]<br>1=ilink,1<br>2=ilink,2<br>3=ilink,3<br>4=ilink,4<br>;50=playback 27178,rpt/nodenames/wa6ybn   ;Testing, this didn't work<br>5=macro,1<br>70=ilink,5<br>71=ilink,6<br>72=ilink,7<br>73=ilink,15<br>
74=ilink,16<br>75=ilink,8</div>
<p>80=status,1<br>81=status,2</p>
<p>6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000  ; Autopatch up<br>0=autopatchdn                           ; Autopatch down</p>
<p>96=playback 27178,rpt/nodenames/wa6ybn   ;Repeater just Donks at me<br>;989=cop,4<br>980=status,3<br>99=cop,6</p>
<p>; Place command macros here</p>
<p>[macro27178]<br>1=playback,rpt/nodenames/wa6ybn     ;Repeater just Donks at me<br>2=*81#                                              ;This one works<br>;Any others, it tell me Macro Not Found, so it must be finding the *51, but not playing the file. File is the same one for initial ID, and it works<br clear="all">
<br>-- <br>KI6PSP (Ed)<br></p>