<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
I have set up a Master II repeater station in full duplex mode using
a URI for dsp squelch and dsp pl decode and it works just fine. The
main thing is to connect it to the volume/squelch hi (raw
discriminator) or you will have problems. The master II should be
able to give you 1V p-p output with 1k tone @ 3k dev on the
volumw/squelch hi which is not available on the back plane. You have
to pull it off one of the connectors on the drawer. Have to check my
notes on what pin. <br>
<br>
Any way I have a couple of units working in this manner with no
problems.<br>
<br>
Jon VA3RQ<br>
<br>
On 10/6/2010 7:46 AM, Corey Dean N3FE wrote:
<blockquote
cite="mid:4BCC91CBCFD66C4489B4BD3233140C3E3B5B41458B@exchange.mail.repeater.net"
type="cite">
<meta http-equiv="Content-Type" content="text/html;
charset=ISO-8859-1">
<meta name="Generator" content="Microsoft Word 12 (filtered
medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
-->
</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal">So I have been using a GE Master II
repeater (actual
repeater, not a converted mobile) for the allstar node in full
duplex repeater
mode. I noticed it just doesn’t dig too well when using the
fob to
decode the PL. I have a maxtrac on another fob and that will
dig into the
noise great. As a test I hooked up a ts32 and ran the output
of that in
the CAS/COR on the fob and it worked great! I want to try to
get the
built in decoder working correctly though. Another friend of
mine is also
running a GE Master II and he is having the same problem.
When we run the
rxnoise level from either the radio-tune-menu or using the
radio tune command
from asterisk it always fails. Anyone have any suggestions on
a way to
resolve this? I have another use for my hardware pl decoder
so I
would like to get the USB Frob working correctly!!!!<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Corey N3FE <o:p></o:p></p>
</div>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@qrvc.com">App_rpt-users@qrvc.com</a>
<a class="moz-txt-link-freetext" href="http://qrvc.com/mailman/listinfo/app_rpt-users">http://qrvc.com/mailman/listinfo/app_rpt-users</a>
</pre>
</blockquote>
</body>
</html>